©2003 Fairchild Semiconductor Corporation
www.fairchildsemi.com
Rev. 1.0.7
Features
Programmable Output Voltage to 36 Volts
Low Dynamic Output Impedance 0.20 Typical
Sink Current Capability of 1.0 to 100mA
Equivalent Full-Range Temperature Coefficient of
50ppm/°C Typical
Temperature Compensated for Operation Over Full Rated
Operating Temperatur e Ra nge
Low Output Noise Voltage
Fast Turn-on Response
Description
The LM431A/LM431B/LM431C are three terminal output
adjustable regulators with thermal stability over operating
temperature range. The output voltage can be set any value
between V
REF
(approximately 2.5 volts) and 36 volts with
two external resistors. These devices have a typical dynam ic
output impedance of 0.2 Active output circuit provides a
sharp turn-on characteristic, making these devices excellent
replacement for Zener Diodes in many applications.
TO-92
8-DIP 8-SOP
1. Ref 2. Anode 3. Cathode
1
11
1.Catho de 2.3.6.7.Anode
4.5.NC 8.Ref
1.Cat hode 2. 3.4. 5.7.NC
6.Anode 8.Ref
Internal Block Diagram
CATHODE
ANODE
REFERENCE
CATHO D E ( K)
ANODE (A)
REFERENCE (R)
2.5 Vref
LM431A/LM431B/LM431C
Programmable Shunt R egulator
LM431A/LM431B/LM431C
2
Absolute Maximum Ratings
(Operating temperature range applies unless otherwise specified.)
Recommended Operating Conditions
Parameter Symbol Value Unit
Cathode Voltage V
KA
37 V
Cathode Current Range (Continuous) I
KA
-100 ~ +150 mA
Reference Input Current Range I
REF
-0.05 ~ +10 mA
Power Dissipation
M, Z Suffix Package
N Suffix Package P
D
770
1000 mW
Operating Temperature Ran ge
LM431xC T
OPR
-25 ~ +85 °C
LM431xI -40 ~ +85 °C
Junction Temperature T
J
150 °C
Storage Temperature Range T
STG
-65 ~ +150 °C
Parameter Symbol Min Typ Max Unit
Cathode Voltage V
KA
V
REF
-36V
Cathode Current I
KA
1.0 - 100 mA
LM431A/LM431B/LM431C
3
Electrical Characteristics
(T
A
= +25°C, unless otherwise specified)
Note1
•LM431
XC : TMIN = -25 °C, TMAX = +85°C
•LM431
XI : TMIN = -40°C, TMAX = +85°C
Parameter Symbol Conditions LM431A LM431B LM431C Unit
Min. Typ. Max. Min. Typ. Max. Min. Typ. Max.
Reference
Input Voltage VREF VKA = VREF, IKA =10mA 2.450 2.500 2.550 2.470 2.495 2.520 2.482 2.495 2.508 V
Deviation of
Reference
Input Voltage
Over-
Temperature
VREF/
TVKA=VREF, IKA=10mA
TMINTATMAX -4.5 17 -4.5 17 -4.5 17 mV
Ratio of
Change in
Reference
Input Voltage
to the Change
in Cathode
Voltage
VREF/
VKA IKA
=10mA
VKA=10V-
VREF
- -1.0 -2.7 - -1.0 -2.7 - -1.0 -2.7
mV/V
VKA=36V-
10V - -0.5 -2.0 - -0.5 -2.0 - -0.5 -2.0
Reference
Input Current IREF IKA=10mA,
R1=10k,R2=-1.54 -1.54 -1.54
µ
A
Deviation of
Reference
Input Current
Over Full
Temperature
Range
IREF/
T
IKA=10mA,
R1=10k,R2=
TA =Full Range -0.4 1.2 -0.4 1.2 -0.4 1.2
µ
A
Minimum
Cathode Cur-
rent for
Regulation
IKA(MIN) VKA=VREF - 0.45 1.0 - 0.45 1.0 - 0.45 1.0 mA
Off - Stage
Cathode
Current IKA(OFF) VKA=36V,
VREF=0 - 0.05 1.0 - 0.05 1.0 - 0.05 1.0
µ
A
Dynamic
Impedance ZKA VKA=VREF,
IKA=1 to 100mA
f 1.0kHz - 0.15 0.5 - 0.15 0.5 - 0.15 0.5
LM431A/LM431B/LM431C
4
Test Circuits
Figure 1. Test Circ uit fo r VKA=VREF Figure 2. Test Circuit for VKAVREF
LM431A/B/C
LM431A/B/C
LM431A/B/C
Figure 3. Test Circuit for lKA(OFF)
LM431A/LM431B/LM431C
5
Typical Performance Characteristics
Figure 4.
Cathode Current vs. Cathode Voltage
Figure 5.
Cathode Current vs. Cathode Voltage
Figure 6.
Change In Reference Input Voltage vs.
Cathode Voltage Figure7. Dynamic Impedance Frequency
Figure 8. Small Signal Voltage Amplification vs. Frequency
Figure 9.
Pul se Re sp onse
LM431A/LM431B/LM431C
6
Typical Performance Characteristics
(Continued)
100p 1n 10n 100n 1!10!
0
20
40
60
80
100
120
140
D
C
B
A
A V
KA
= Vref
B V
KA
= 5.0 V @ I
K
= 10
mA
C V
KA
= 10 V @ I
K
= 10
mA
D V
KA
= 15 V @ I
K
= 10
mA
T
A
= 25
o
C
I
K
, CATHODE CURRENT(mA)
C
L
, LOAD CA PACIT ANCE
Figu re 10. Stability Boundary Co nditi on s
LM431A/LM431B/LM431C
7
Typical Application
V
O
1R
1
R
2
-------+


V
ref
=
LM431A/B/C
V
O
V
ref
1R
1
R
2
-------+


=
LM431A/B/C
LM7805/MC7805
V
O
1R
1
R
2
-------+


V
ref
=
LM431A/B/C
LM431A/B/C LM431A/B/C
Figur e 11
.
Shunt Regulator Figure 12
.
Output Control for
minal Fixe d Regula torThree- Ter-
-
Figure 13. High Current Shunt Regulator
Figure 14. Current Limit or Current Source Figure 15. Constant-Curre nt Sink
LM431A/LM431B/LM431C
8
Mechanic al Dime nsions
Package Dimensions in millimeters
0.46
±0.10
1.27TYP
(R2.29)
3.86MAX
[1.27
±0.20
]1.27TYP
[1.27
±0.20
]
3.60
±0.20
14.47
±0.40
1.02
±0.10
(0.25) 4.58
±0.20
4.58
+0.25
–0.15
0.38
+0.10
–0.05
0.38
+0.10
–0.05
TO-92
LM431A/LM431B/LM431C
9
Mechanic al Dime nsions
(Continued)
Package Dimensions in millimeters
4.92
±0.20
0.194
±0.008
0.41
±0.10
0.016
±0.004
1.27
0.050
5.72
0.225
1.55
±0.20
0.061
±0.008
0.1~0.25
0.004~0.001
6.00
±0.30
0.236
±0.012
3.95
±0.20
0.156
±0.008
0.50
±0.20
0.020
±0.008
5.13
0.202 MAX
#1
#4 #5
0~8°
#8
0.56
0.022
()
1.80
0.071
MAX0.10
MAX0.004
MAX
MIN
+0.10
-0.05
0.15+0.004
-0.002
0.006
8-SOP
LM431A/LM431B/LM431C
10
Mechanic al Dime nsions
(Continued)
Package Dimensions in millimeters
8-DIP
6.40 ±0.20
3.30 ±0.30
0.130 ±0.012
3.40 ±0.20
0.134 ±0.008
#1
#4 #5
#8
0.252 ±0.008
9.20 ±0.20
0.79
2.54
0.100
0.031
()
0.46 ±0.10
0.018 ±0.004
0.060 ±0.004
1.524 ±0.10
0.362 ±0.008
9.60
0.378 MAX
5.08
0.200
0.33
0.013
7.62
0~15°
0.300
MAX
MIN
0.25 +0.10
0.05
0.010+0.004
0.002
LM431A/LM431B/LM431C
11
Ordering Information
Product Number Output Voltage Tolerance Package Operating Temperature
LM431CCZ 0.5% TO-92
-25 ~ +85
°
C
LM431CCM 8-SOP
LM431BCZ 1% TO-92
LM431BCM 8-SOP
LM431ACN 2% 8-DIP
LM431ACZ TO-92
LM431ACM 8-SOP
LM431CIZ 0.5% TO-92
-40 ~ +85
°
C
LM431CIM 8-SOP
LM431BIZ 1% TO-92
LM431BIM 8-SOP
LM431AIZ 2% TO-92
LM431AIM 8-SOP
LM431A/LM431B/LM431C
8/4/03 0.0m 001
Stock#DSxxxxxxxx
2003 Fairchild Semiconductor Corporation
LIFE SU PP ORT POL ICY
FAIRCHILD’ S PRODUCTS ARE NOT AUTHORIZ ED FOR USE AS CRI TICAL C OMPONENTS IN LIFE SUPP ORT DEVI CES
OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR
CORPORA TION. As used he rein :
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the body,
or (b) support or sustain life, and (c) whose failure to
perform when properly used in accordance with
instructions for use provided in the labeling, can be
reasonably expected to result in a significant injury of the
user.
2. A critical component in any component of a life support
device or syst em who se fai lure to pe rform can be
reasonably expected to cause the failure of the life support
device or system, or to affect its safety or effec tiv ene ss.
www.fairchildsemi.com
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MA KE CHANGES WITHOUT FURTHER NOTICE TO ANY
PRO DUCTS HEREIN TO IMPROVE RELIABILITY, FUN CTION OR DESIG N. FAIRCHILD DO ES NOT ASSUME ANY
LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER
DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIG HTS, NOR THE RIGHTS OF OT HERS.