VDI 100-06P1 VII 100-06P1 VID 100-06P1 VIO 100-06P1 IC25 = 93 A VCES = 600 V VCE(sat) typ. = 2.4 V IGBT Modules in ECO-PAC 2 Short Circuit SOA Capability Square RBSOA Preliminary data sheet VII X15 SV18 NTC X16 T16 NTC X16 IK10 F1 n Pin arangement see outlines Features Maximum Ratings TVJ = 25C to 150C 600 V 20 V 93 63 A A 150 VCES A 10 s 294 W VGES TC = 25C TC = 80C ICM VCEK VGE = 15 V; RG = 15 ; TVJ = 125C RBSOA, Clamped inductive load; L = 100 H tSC (SCSOA) VCE = VCES; VGE = 15 V; RG = 15 ; TVJ = 125C non-repetitive Ptot TC = 25C Symbol Conditions ne IC25 IC80 fo r Characteristic Values (TVJ = 25C, unless otherwise specified) min. typ. max. VCE(sat) IC = 100 A; VGE = 15 V; TVJ = 25C TVJ = 125C VGE(th) IC = 1.5 mA; VGE = VCE ICES VCE = VCES; 4.5 VGE = 0 V; TVJ = 25C TVJ = 125C No t td(on) tr td(off) tf Eon Eoff 2.4 2.8 VCE = 0 V; VGE = 20 V Inductive load, TVJ = 125C VCE = 300 V; IC = 60 A VGE = 15/0 V; RG = 15 Cies VCE = 25 V; VGE = 0 V; f = 1 MHz RthJC RthJH (per IGBT) with heatsink compound (0.42 K/m.K; 50 m) IXYS reserves the right to change limits, test conditions and dimensions. (c) 2006 IXYS All rights reserved 2.8 V V 6.5 V 1.4 6.5 mA mA 150 nA 150 60 450 40 3.2 2.2 ns ns ns ns mJ mJ 4.2 nF 0.85 0.43 K/W K/W * FRED diodes - fast reverse recovery - low forward voltage * Industry Standard Package - solderable pins for PCB mounting - isolated DCB ceramic base plate Advantages * space and weight savings * reduced protection circuits * leads with expansion bend for stress relief Typical Applications * AC and DC motor control * AC servo and robot drives * power supplies * welding inverters Recommended replacement: Please contact your local sales office 0650 VCES * NPT IGBT's - positive temperature coefficient of saturation voltage - fast switching de s Conditions w Symbol ig IGBTs IGES B3 PS18 X15 L9 VX18 LMN 9 X16 NTC X15 K10 L9 AC1 S18 GH10 E2 AC1 IK10 L9 X13 A1 VDI VID OP9 IJK 10 VIO 1-2 VDI 100-06P1 VII 100-06P1 VID 100-06P1 VIO 100-06P1 VII Reverse diodes (FRED) Symbol Conditions Maximum Ratings IF25 IF80 TC = 25C TC = 80C 134 82 Symbol Conditions Characteristic Values min. typ. max. VF IF = 60 A; TVJ = 25C TVJ = 125C 1.78 1.33 IRM trr IF = 60 A; diF/dt = 500 A/s; TVJ = 125C VR = 300 V; VGE = 0 V 28 100 A ns RthJC RthJH with heatsink compound (0.42 K/m.K; 50 m) 1.32 0.66 K/W K/W A A 1.99 V V B3 Conditions Characteristic Values min. typ. max. R25 B25/50 T = 25C 4.75 5.0 3375 Conditions Maximum Ratings TVJ Tstg IISOL 1 mA; 50/60 Hz Md mounting torque (M4) a Max. allowable acceleration Symbol Conditions dS dA Creepage distance on surface (Pin to heatsink) Strike distance in air (Pin to heatsink) 3000 V~ Nm lb.in. m/s2 1.5 - 2.0 14 - 18 50 Characteristic Values min. typ. max. fo r Weight C C ne VISOL -40...+150 -40...+150 w Symbol VIO de s Module 5.25 k K ig Symbol n Temperature Sensor NTC 11.2 11.2 mm mm 24 VID Data according to IEC 60747 and refer to a single transistor or diode unless otherwise stated. IXYS reserves the right to change limits, test conditions and dimensions. (c) 2006 IXYS All rights reserved 0650 No t VDI g 2-2