AneEuta ADSL SPLITTER APS-9001B a The ADSL Splitter is used to block any noise generated by other phones, faxs being introduced on the POT line, and pass high frequency signal to ADSL MODEM. oOo The filter with more than two orders has high performance on voice band signal selection. FEATURE Meeting CSA 1950,FCC PART 68 Cerfification Operation Temperature -10C to +55C Operation Humidity 10% to 90 % RH The POT splitter and low-pass filter will not affect the normal use of telephone service even if power supply or the comomemt tself fails. Electrical characteristics meets annex E.2 of ITU-T Rec.6.992.1 Attenuation Distortion con meet Annex E.2.3.1.3 of ITU-T Rec.G.992.1 Return Loss can meet Annex .2.3.1.1 of ITU-T Rec.G.992.1 Data and voice links operate independently, preventing mutual interface between those signals. xDSL U-C U-R POTS | | | Zr is the Normal Remote POTS Splitter | Termination in Test Set i i i | | | me ||} Test | | S} | | | test ar LH 1 LPF) | HH L (300.9) Loop i G] | | | Equipment (600.9) I | | | | | ZHP-r (load) LINE 38 RJ-11 3 o xDSL RJ-11 4o APS-9001B [ 3 PHONE 4 RAM Hz 100 200 500 1K 2K 5K 10K 20K 50K 100K ( ) FREQUENCY ELECTRICAL CHARACTERISTICS 3dB CUTOFF FREQUENCY 7KHz D.C CHARACTERISTICS D.C.C. 100 mA D.C.R. 25.0.Max. LR. >5M @TIP TO GND & RING TO GND INSERTION LOSS SHORT LOOP 1.0dB Max. @1004Hz LONG LOOP 0.75dB Max. @1004Hz ATTENUATION SHORT LOOP | +1.5dB @0.2KHz ~ 3.4KHz DISTORTION SHORT LOOP | +2.0dB @3.4KHz ~ 4.0KHz LONG LOOP +0.5/-1.5dB @0.2KHz ~ 3.4KHz LONG LOOP +1.0/-1.5dB @3.4KHz ~ 4.0KHz DELAY SHORT LOOP | 200uS @0.6KHz ~ 3.2KHz DISTORTION SHORT LOOP | 250uS @0.2KHz ~ 4.0KHz LONG LOOP 200uS @0.6KHz ~ 3.2KHz LONG LOOP 250uS @0.2KHz ~ 4.0KHz RETURN LOSS ERL 6dB Min. SRL-L 5dB Min. SRL-H 3dB Min. LONGITUDINAL 58dB Min. @0.2KHz ~ 1KHz BALANCE 53dB Min. @3KHz ATTENUATION 65dB Min. @30KHz ~ 3OOKHz 56dB Min. @300KHz ~ 1104KHz IMPEDANCE 600 .O @300Hz ~ 3.4KHz UNIT: mm A = 84.40+0.50 B = 62.20+0.50 C = 27.8010.50 D = 109.2040.50 E = 96.85 (TYP) |)