TLE4276SV50 - Infineon Technologies

Low Drop Voltage Regulator

TLE 4276

Data Sheet 1 Rev. 2.7, 2007-10-23

Type Package Type Package

TLE 4276 V50 PG-TO220-5-11 TLE 4276 GV50 PG-TO263-5-1

TLE 4276 V85 PG-TO220-5-11 TLE 4276 GV85 PG-TO263-5-1

TLE 4276 V10 PG-TO220-5-11 TLE 4276 GV10 PG-TO263-5-1

TLE 4276 V PG-TO220-5-11 TLE 4276 GV PG-TO263-5-1

TLE 4276 SV50 PG-TO220-5-12 TLE 4276 DV50 PG-TO252-5-11

TLE 4276 SV85 PG-TO220-5-12 TLE 4276 DV PG-TO252-5-11

TLE 4276 SV PG-TO220-5-12

P-TO220-5-3

P-TO220-5-43

P-TO220-5-122

P-TO252-5-11

Features

• 5 V, 8.5 V, 10 V or variable output voltage

• Output voltage tolerance ≤ ±4%

• 400 mA current capability

• Low-drop voltage

• Inhibit input

• Very low current consumption

• Short-circuit-proof

• Reverse polarity proof

• Suitable for use in automotive electronics

• Green Product (RoHS compliant)

• AEC Qualified

http://store.iiic.cc/

Data Sheet 2 Rev. 2.7, 2007-10-23

TLE 4276

Functional Description

The TLE 4276 is a low-drop voltage regulator in a TO package. The IC regulates an input

voltage up to 40 V to VQ,nom = 5.0 V (V50), 8.5 V (V85), 10 V (V10) and adjustable voltage

(V). The maximum output current is 400 mA. The IC can be switched off via the inhibit

input, which causes the current consumption to drop below 10 µA. The IC is short-circuit-

proof and includes temperature protection which turns off the device at overtemperature.

Dimensioning Information on External Components

The input capacitor CI is necessary for compensation of line influences. Using a resistor

of approx. 1 Ω in series with CI, the oscillating of input inductivity and input capacitance

can be damped. The output capacitor CQ is necessary for the stability of the regulation

circuit. Stability is guaranteed at values CQ ≥ 22 µF and an ESR of ≤ 3 Ω within the

operating temperature range.

Circuit Description

The control amplifier compares a reference voltage to a voltage that is proportional to the

output voltage and drives the base of the series transistor via a buffer. Saturation control

as a function of the load current prevents any oversaturation of the power element. The

IC also incorporates a number of internal circuits for protection against:

• Overload

• Overtemperature

• Reverse polarity

http://store.iiic.cc/

TLE 4276

Data Sheet 3 Rev. 2.7, 2007-10-23

Figure 1 Pin Configuration (top view)

Table 1 Pin Definitions and Functions

Pin No. Symbol Function

1I Input; block to ground directly at the IC with a ceramic capacitor.

2INHInhibit; low-active input.

3GNDGround

4N.C.

Not connected for V50, V85, V10

Voltage Adjust Input; only for adjustable version. Connect an

external voltage divider to determine the output voltage.

5QOutput; block to GND with a ≥ 22 µF capacitor, ESR ≤ 3 Ω at 10 kHz

Heatsink Connect to GND.

ΙGND

N.C.

INH

AEP02041

(VA)

GND

INH (VA)

AEP02042

N.C.

AEP02560

INH

ΙN.C.Q

(VA)

GND

INH

AEP02043

N.C.

(VA)

PG-TO220-5-11 PG-TO220-5-12 PG-TO263-5-1 PG-TO252-5-11

http://store.iiic.cc/

Data Sheet 4 Rev. 2.7, 2007-10-23

TLE 4276

Figure 2 Block Diagram

Ι1

AEB02044

GND

Bandgap

Reference

Control

Amplifier

Sensor

Temperature

Buffer

Saturation

Control and

Protection

Circuit

INH

**)

For fixed Voltage Regulator only

For adjustable Voltage Regulator only

**)

http://store.iiic.cc/

TLE 4276

Data Sheet 5 Rev. 2.7, 2007-10-23

Note: Maximum ratings are absolute ratings; exceeding any one of these values may

cause irreversible damage to the integrated circuit.

Table 2 Absolute Maximum Ratings

Parameter Symbol Limit Values Unit Test Condition

Min. Max.

Input I

Voltage VI-42 45 V –

Current II– – – Internally limited

Inhibit INH

Voltage VINH -42 45 V –

Voltage Adjust Input VA

Voltage VVA -0.3 10 V –

Output Q

Voltage VQ-1.0 40 V –

Current IQ– – – Internally limited

Ground GND

Current IGND –100mA–

Temperature

Junction temperature Tj-40 150 °C–

Storage temperature Tstg -50 150 °C–

Table 3 ESD Rating

Parameter Symbol Limit Values Unit Notes

Min. Max.

ESD Capability VESD,HBM 2000 – V Human Body Model

http://store.iiic.cc/

Data Sheet 6 Rev. 2.7, 2007-10-23

TLE 4276

Table 4 Operating Range

Parameter Symbol Limit Values Unit Remarks

Min. Max.

Input voltage VIVQ + 0.5 40 V Fixed voltage devices

V50, V85, V10

Input voltage VIVQ + 0.5 40 V Variable device V

Input voltage VI4.5 V 40 V Variable device V,

VQ < 4 V

Junction temperature Tj-40 150 °C–

Thermal Resistance

Junction ambient Rthj-a –65K/WTO220

Junction ambient Rthj-a – 80 K/W TO252, TO2631)

Junction case Rthj-c –4K/W–

1) Package mounted on PCB 80 × 80 × 1.5mm3; 35µ Cu; 5µ Sn; Footprint only; zero airflow.

http://store.iiic.cc/

TLE 4276

Data Sheet 7 Rev. 2.7, 2007-10-23

Table 5 Characteristics

VI = 13.5 V; -40 °C < Tj < 150 °C (unless otherwise specified)

Parameter Sym-

bol

Limit Values Unit Measuring

Condition

Measuring

Circuit

Min. Typ. Max.

Output voltage VQ4.8 5.0 5.2 V V50-Version

5 mA < IQ < 400 mA

6 V < VI < 28 V

Output voltage VQ4.8 5.0 5.2 V V50-Version

5 mA < IQ < 200 mA

6 V < VI < 40 V

Output voltage VQ8.16 8.50 8.84 V V85-Version

5 mA < IQ < 400 mA

9.5 V < VI < 28 V

Output voltage VQ8.16 8.50 8.84 V V85-Version

5 mA < IQ < 200 mA

9.5 V < VI < 40 V

Output voltage VQ9.6 10.0 10.4 V V10-Version

5 mA < IQ < 400 mA

11 V < VI < 28 V

Output voltage VQ9.6 10.0 10.4 V V10-Version

5 mA < IQ < 200 mA

11 V < VI < 40 V

Output voltage

tolerance ∆VQ-4 – 4 % V-Version

R2 < 50 kΩ

VQ + 1 V ≤ VI ≤ 40 V

VI > 4.5 V

5 mA ≤ IQ ≤ 400 mA

Output current

limitation1) IQ400 600 1100 mA – 1

Current

consumption;

Iq = II - IQ

Iq–– 10µAVINH = 0 V;

Tj ≤ 100 °C

Current

consumption;

Iq = II - IQ

Iq– 100 220 µAIQ = 1 mA 1

Current

consumption;

Iq = II - IQ

Iq–5 10mAIQ = 250 mA 1

http://store.iiic.cc/

Data Sheet 8 Rev. 2.7, 2007-10-23

TLE 4276

Current

consumption;

Iq = II - IQ

Iq–1525mAIQ = 400 mA 1

Drop voltage1) VDR – 250 500 mV V50, V85, V10

IQ = 250 mA

VDR = VI - VQ

Drop voltage1) VDR – 250 500 mV variable devices

IQ = 250 mA

VI > 4.5 V

VDR = VI - VQ

Load regulation ∆VQ,Lo –5 35mVIQ = 5 mA to 400 mA 1

Line regulation ∆VQ,Li –1525mV∆Vl = 12 V to 32 V

IQ = 5 mA

Power supply

ripple rejection

PSRR –54– dBfr = 100 Hz;

Vr = 0.5 Vpp

Temperature

output voltage

drift

dVQ/dT–0.5– – – mV/K

Inhibit

Inhibit on

voltage

VINH –2 3.5VVQ ≥ 4.9 V 1

Inhibit off

voltage

VINH 0.5 1.7 – V VQ ≤ 0.1 V 1

Input current IINH 51020µAVINH = 5 V 1

1) Measured when the output voltage VQ has dropped 100 mV from the nominal value obtained at VI = 13.5 V.

Table 5 Characteristics (cont’d)

VI = 13.5 V; -40 °C < Tj < 150 °C (unless otherwise specified)

Parameter Sym-

bol

Limit Values Unit Measuring

Condition

Measuring

Circuit

Min. Typ. Max.

http://store.iiic.cc/

TLE 4276

Data Sheet 9 Rev. 2.7, 2007-10-23

Figure 3 Measuring Circuit

Figure 4 Application Circuit

AES02045

INH

GND

100 nF100 µF

22 µF

INH

OutputInput

TLE 4276

Optional for adjustable Voltage Regulator

Voltage

Adjust

I I

)

234

INH

AES02046

Output

Input

TLE 4276

Optional for adjustable Voltage Regulator

Voltage

Adjust

e.g. KL 15

)

1Q5

GND

INH

http://store.iiic.cc/

Data Sheet 10 Rev. 2.7, 2007-10-23

TLE 4276

Application Information for Variable Output Regulator TLE 4276 V, SV, DV, GV

The output voltage of the TLE 4276 V can be adjusted between 2.5 V and 20 V by an

external output voltage divider, closing the control loop to the voltage adjust pin VA.

The voltage at pin VA is compared to the internal reference of typical 2.5 V in an error

amplifier. It controls the output voltage.

Figure 5 Application Detail External Components at Output for Variable

Voltage Regulator

The output voltage is calculated according to Equation (1):

VQ = (R1 + R2)/R2 × Vref, neglecting IVA (1)

Vref is typically 2.5 V.

To avoid errors caused by leakage current IVA, we recommend to choose the resistor

value R2 according to Equation (2):

R2 < 50 kΩ(2)

For a 2.5 V output voltage the output pin Q is directly connected to the adjust pin VA.

The accuracy of the resistors R1 and R2 add an additional error to the output voltage

tolerance.

The operation range of the variable TLE 4276 V is VQ + 0.5 V to 40 V. For internal biasing

a minimum input voltage of 4.3 V is required. For output voltages below 4 V the voltage

drop is 4.3 V - VQ

AEB02804

Current

and

Saturation

Control

Internal

Reference

2.5 V Typical

Vref

22 µF

http://store.iiic.cc/

Data Sheet 11 Rev. 2.7, 2007-10-23

TLE 4276

Typical Performance Characteristics (V50, V85 and V10):

Voltage VDR versus

Output Current IQ

Current Consumption Iq versus

Output Current IQ (high load)

Max. Output Current IQ versus

Input Voltage VI

Current Consumption Iq versus

Output Current IQ (low load)

AED03017

200

400

600

500

300

100

j= 125 ˚C

100 200 300 mA 400

= 25 ˚C

AED03021

100 200 300 400 600mA

= 25 ˚C

= 13.5 V

AED03020

= 0 V

= 25 ˚C

10 20 30 40 50V

200

400

600

800

AED03022

10 20 30 40 60mA

= 25 ˚C

= 13.5 V

0.1

0.2

0.3

0.4

0.5

0.6

http://store.iiic.cc/

Data Sheet 12 Rev. 2.7, 2007-10-23

TLE 4276

Typical Performance Characteristics for V50:

Output Voltage VQ versus

Temperature Tj

Low Voltage Behavior

Current Consumption Iq versus

Input Voltage VI

High Voltage Behavior

AED03081

-40 04080120 ˚C 160

4.8

5.2

= 13.5 V

4.9

5.0

5.1

AED01968

02468V10

= 25 ˚C

= 20

Ω

AED01967

10 20 30 V

=20 Ω

= 25 C

AED03082_4276

-50

-2

= 25 ˚C

= 6.8 k

-25 0 25 50

0.5

1.0

1.5

2.0

2.5

3.0

3.5

Ω

http://store.iiic.cc/

Data Sheet 13 Rev. 2.7, 2007-10-23

TLE 4276

Typical Performance Characteristics for V85:

Output Voltage VQ versus

Temperature Tj

Low Voltage Behavior

Current Consumption Iq versus

Input Voltage VI

High Voltage Behavior

AED03018

-40 04080120 ˚C 160

7.5

8.0

8.5

9.0

= 13.5 V

Ι=V

12 20

VΙ

= 25 C

= 34

jΩ

AED01972

AED03025

0 10 20 30 40 V50

j= 25 ˚C

= 34 Ω

AED03080_4276

-50

-2

= 25 ˚C

= 10 k

Ω

-25 0 25 50

0.5

1.0

1.5

2.0

2.5

3.0

3.5

http://store.iiic.cc/

Data Sheet 14 Rev. 2.7, 2007-10-23

TLE 4276

Typical Performance Characteristics for V10:

Output Voltage VQ versus

Temperature Tj

Low Voltage Behavior

Current Consumption Iq versus

Input Voltage VI

High Voltage Behavior

AED03019

-40 04080120 ˚C 160

9.0

9.5

10.0

10.5

= 13.5 V

AED03024

0481216 V20

= 25 ˚C

= 40 Ω

AED03023

0 10 20 30 40 V50

= 25 ˚C

= 40

Ω

AED03079_4276

-50

-2

= 25 ˚C

= 12 k

Ω

-25 0 25 50

0.5

1.0

1.5

2.0

2.5

3.0

3.5

http://store.iiic.cc/

TLE 4276

Data Sheet 15 Rev. 2.7, 2007-10-23

Package Outlines

Figure 6 PG-TO220-5-11 (Plastic Transistor Single Outline)

Green Product (RoHS compliant)

To meet the world-wide customer requirements for environmentally friendly products

and to be compliant with government regulations the device is available as a green

product. Green products are RoHS-Compliant (i.e Pb-free finish on leads and suitable

for Pb-free soldering according to IPC/JEDEC J-STD-020).

You can find all of our packages, sorts of packing and others in our

Infineon Internet Page “Products”: http://www.infineon.com/products.

Dimensions in mm

SMD = Surface Mounted Device

A0.25 M

9.9 ±0.2

2.8

15.65

±0.3

12.95

0...0.15

±0.1

1.27

4.4

9.25

±0.2

0.05

±0.2

±0.3

8.51)

10 ±0.2

3.7-0.15

C0.5 ±0.1

±0.3

8.6

10.2

±0.3

±0.4

3.9

±0.4

8.4

3.7

±0.3

5 x ±0.1

0.8

1.74 x

2.4

±0.3

1.6

All metal surfaces tin plated, except area of cut.

Typical

0...0.3

GPT09064

http://store.iiic.cc/

Data Sheet 16 Rev. 2.7, 2007-10-23

TLE 4276

Figure 7 PG-TO220-5-12 (Plastic Transistor Single Outline)

Green Product (RoHS compliant)

To meet the world-wide customer requirements for environmentally friendly products

and to be compliant with government regulations the device is available as a green

product. Green products are RoHS-Compliant (i.e Pb-free finish on leads and suitable

for Pb-free soldering according to IPC/JEDEC J-STD-020).

BA0.25 M

9.9 ±0.2

2.8

15.65 ±0.3

12.95

0...0.15

±0.11.27

4.4

9.25 ±0.2

0.05

±0.2

17 ±0.3

8.51)

10 ±0.2

3.7 -0.15

2.4

0.5 ±0.1

13 ±0.5

±0.5

0...0.3

1.74 x

5 x ±0.1

0.8

2.4

All metal surfaces tin plated, except area of cut.

Metal surface min. X = 7.25, Y = 12.3

Typical

GPT09065

You can find all of our packages, sorts of packing and others in our

Infineon Internet Page “Products”: http://www.infineon.com/products.

Dimensions in mm

SMD = Surface Mounted Device

http://store.iiic.cc/

TLE 4276

Data Sheet 17 Rev. 2.7, 2007-10-23

Figure 8 PG-TO263-5-1 (Plastic Transistor Single Outline)

Green Product (RoHS compliant)

To meet the world-wide customer requirements for environmentally friendly products

and to be compliant with government regulations the device is available as a green

product. Green products are RoHS-Compliant (i.e Pb-free finish on leads and suitable

for Pb-free soldering according to IPC/JEDEC J-STD-020).

BA0.25

±0.2

GPT09113

8.5

(15)

±0.2

9.25 ±0.3

0...0.15

5 x 0.8

±0.1

1.27

4.4

0.5

±0.1

±0.3

2.7

4.7±0.5

2.4

1.7

0...0.3 A

7.55

4 x

All metal surfaces tin plated, except area of cut.

Metal surface min. X = 7.25, Y = 6.9

Typical

0.1 B

0.1

0.05

8˚ MAX.

You can find all of our packages, sorts of packing and others in our

Infineon Internet Page “Products”: http://www.infineon.com/products.

Dimensions in mm

SMD = Surface Mounted Device

http://store.iiic.cc/

Data Sheet 18 Rev. 2.7, 2007-10-23

TLE 4276

Figure 9 PG-TO252-5-11 (Plastic Transistor Single Outline)

Green Product (RoHS compliant)

To meet the world-wide customer requirements for environmentally friendly products

and to be compliant with government regulations the device is available as a green

product. Green products are RoHS-Compliant (i.e Pb-free finish on leads and suitable

for Pb-free soldering according to IPC/JEDEC J-STD-020).

1) Includes mold flashes on each side.

4.56 0.25

6.5

5.7 MAX.

±0.1

per side

0.15 MAX.

-0.2

6.22

±0.5

9.98

(4.24) 1

1.14

5 x 0.6

±0.15

0.8

±0.1

+0.15

-0.05

0.1

-0.04

+0.08

0...0.15

0.51 MIN.

0.5

2.3

-0.10

0.5

+0.05

-0.04

+0.08

(5)

-0.01

0.9

+0.20

All metal surfaces tin plated, except area of cut.

GPT09527

You can find all of our packages, sorts of packing and others in our

Infineon Internet Page “Products”: http://www.infineon.com/products.

Dimensions in mm

SMD = Surface Mounted Device

http://store.iiic.cc/

TLE 4276

Revision History

Data Sheet 19 Rev. 2.7, 2007-10-23

Version Date Changes

Rev. 2.7 2007-10-23 Page 17: Corrected package outline drawing

of PG-TO263-5-1

Rev. 2.6 2007-03-20 Initial version of RoHS-compliant derivate of TLE 4276

Page 1: AEC certified statement added

Page 1 and Page 15: RoHS compliance statement and

Green product feature added

Page 1 and Page 15: Package changed to RoHS compliant

version

Legal Disclaimer updated

Rev. 2.5 2004-12-23 Added ESD capability information in table “Maximum

Ratings”.

http://store.iiic.cc/

Edition 2007-10-23

Published by

Infineon Technologies AG

81726 Munich, Germany

Legal Disclaimer

The information given in this document shall in no event be regarded as a guarantee of conditions or

characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any

information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties

and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights

of any third party.

Information

For further information on technology, delivery terms and conditions and prices, please contact the nearest

Infineon Technologies Office (www.infineon.com).

Warnings

Due to technical requirements, components may contain dangerous substances. For information on the types in

question, please contact the nearest Infineon Technologies Office.

Infineon Technologies components may be used in life-support devices or systems only with the express written

approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure

of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support

devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain

and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may

be endangered.

http://store.iiic.cc/