N5751A-GSA - KEYSIGHT TECHNOLOGIES

Keysight N5700 Series

System DC Power Supplies

Models: N5741A-49A, N5750A-52A, N5761A-69A, N5770A-72A

Data Sheet

– 24 models: 750 W and 1500 W

output power

– Up to 600 V and up to 180 A

– Small high density 1 U package

– Built-in voltage and current mea-

surement

– Full protection from over-voltage

and over-current

– 85-265 Vac universal AC input

– Command compatibility for

Sorensen DLM and Xantrex XFR DC

supplies

– LAN, USB, and GPIB interfaces

standard

– Fully compliant to LXI Class C

specification

The Keysight Technologies, Inc.

N5700 Series system DC power sup-

plies give you just the right perfor-

mance — at just the right price —

in a compact (1 U) package. This

family of affordable 750 W and 1500

W single-output programmable DC

power supplies consists of 24 mod-

els for simple DC power applica-

tions. They provide stable output

power, built-in voltage and current

measurement, and output voltage

and current from 6 V to 600 V and

1.3 A to 180 A.

These economical supplies offer

many system-ready features like

multiple standard I/O interfaces to

simplify and accelerate test-system

development for R&D, design valida-

tion, and manufacturing engineers in

the aerospace/defense, automotive,

component and communications

industries.

Small, high-density package

saves you rack space

The N5700 provides up to 1500 W

in a

small space-saving 1 U-high, 19-inch-

wide package. Its air vents are in

the front, side and rear (not on the

top or bottom), so you can stack

other instruments directly above or

below it to save valuable rack space.

Easy front-panel operation

You can quickly and easily operate

the power supply with its rotary

knobs and buttons. Using the front-

panel controls, you can make coarse

or fine adjustments of output voltage

and current, protection settings, and

set power-on states (last setting

memory or factory default setting).

The output voltage and current are

Family of Affordable Basic System DC Power Supplies

displayed simultaneously, and LED

indicators show power supply status

and operating modes. You can lock

the front panel controls to protect

against accidental power-supply

parameter changes.

Extensive device protection

To safeguard your device from

damage, the N5700 Series power

supplies provide over-temperature,

over-current and over-voltage protec-

tion (OVP) to shut down the power

supply output when a fault condition

occurs. They also offer an under-

voltage limit (UVL) that prevents

adjustment of the output voltage

below a certain limit. The combina-

tion of UVL and OVP capabilities lets

you create a protection window for

sensitive load circuitry.

Simplify system connections

The N5700 Series power supplies

come standard with GPIB, Ethernet/

LAN, and USB 2.0 interfaces giving

you the flexibility to use your I/O

interface of choice today and in the

future. The N5700 is fully compliant

with the LXI Class C specification.

Figure 1. Front-panel control knobs and buttons make it easy

to use N5700 power supplies.

Figure 2. Built-in Ethernet, USB 2.0, and GPIB interfaces enable

easy system connections.

Remote access and control

The built-in Web server provides

remote access and control of the

instrument via a standard browser

such as Microsoft Internet Explorer.

Using the Web browser, you can set

up, monitor and operate the N5700

remotely.

Easy system integration and



To simplify system development, the

N5700 comes standard with IVI-COM

drivers. The N5700 supports the easy-

to-use SCPI (Standard Commands for

Programmable Instruments).

Command compatibility

The N5700 includes a compatibility

command set for the Xantrex XFR

series power supplies, the Sorensen

DLM series power supplies, and the

Keysight 603x series power supplies.

This simplifies system integration

when converting to the N5700. For

a comparison of these products, see

application notes:

–Side-by-side comparison:

Keysight N5700 Series System DC

Source and Sorensen DLM DC

Power Supply, AN 1502-1,

5989-1628EN

–Side-by-side comparison:

Keysight N5700 Series System DC

Source and Xantrex XFR

AN 1502-2, 5989-1630EN



connect multiple units in

parallel and series

Should you need greater output power,

the N5700 series power supplies give

you the flexibility to connect in paral-

lel up to four similarly rated units for

greater output current and connect

two similarly rated units in series for

greater output voltage (see output

terminal isolation information).

Analog programming and

monitoring

The output voltage and current can

be programmed from zero to full scale

by either an analog voltage 0 to 5 V

or 0 to 10 V or by resistances of

0 to 5 kΩ or 0 to 10 kΩ.

Universal AC input

All N5700 models have universal AC

input so they can be automatically

operated from any AC mains input

voltage worldwide. They can be

operated from line voltages of

85 – 265 Vac, 47 to 63 Hz, with no

switch to set or fuses to change

when you switch from one voltage

standard to another. They also

provide power factor correction.

Rack mounting

The rack mount ears and handles

are provided standard with every unit.

In addition the N5740A rack mount

slide kit makes it easy to integrate an

N5700 into a test rack by providing

all the necessary hardware to rack

mount an N5700 series power supply

in only 1 U of rack space.

Figure 3. N5700 series web graphical user interface for remote access and control of the

power supply.



Unless otherwise noted, specifications are warranted over the ambient temperature range of 0 to 40 °C.

N5741A N5742A N5743A N5744A N5745A N5746A

DC output ratings1 Voltage 6 V 8 V 12.5 V 20 V 30 V 40 V

Current 100 A 90 A 60 A 38 A 25 A 19 A

Power 600 W 720 W 750 W 760 W 750 W 760 W

Output ripple and noise CV p-p260 mV 60 mV 60 mV 60 mV 60 mV 60 mV

CV rms38 mV 8 mV 8 mV 8 mV 8 mV 8 mV

Load effect

(change from 10% to 90%)

Voltage 2.6 mV 2.8 mV 3.25 mV 4 mV 5 mV 6 mV

Current 25 mA 23 mA 17 mA 12.6 mA 10 mA 8.8 mA

Source effect

(change from 85-132 VAC input

or 170-265 VAC input)

Voltage 2.6 mV 2.8 mV 3.25 mV 4 mV 5 mV 6 mV

Current 12 mA 11 mA 8 mA 5.8 mA 4.5 mA 3.9 mA

Programming accuracy1Voltage 0.05%+ 3 mV 4 mV 6.25 mV 10 mV 15 mV 20 mV

Current 0.1%+ 100 mA 90 mA 60 mA 38 mA 25 mA 19 mA

Measurement accuracy Voltage 0.1%+ 6 mV 8 mV 12.5 mV 20 mV 30 mV 40 mV

Current 0.1%+ 300 mA 270 mA 180 mA 114 mA 75 mA 57 mA

Load transient recovery time4Time ≤1.5 ms ≤1.5 ms ≤1.5 ms ≤1 ms ≤1 ms ≤1 ms

Supplemental Characteristics Supplemental characteristics are not warranted but are descriptions of typical

performance determined either by design or type testing

Output response time

(settle to within ±1.0% of the

rated output, with a resistive

load)

Up, full load 0.08 s 0.08 s 0.08 s 0.08 s 0.08 s 0.08 s

Down, full load 0.05 s 0.05 s 0.05 s 0.05 s 0.08 s 0.08 s

Down, no load 0.5 s 0.6 s 0.7 s 0.8 s 0.9 s 1.0 s

Command response time555 ms

Data readback transfer time63 ms

Remote sense compensation Volts/load lead 1 V 1 V 1 V 1 V 1.5 V 2 V

Over-voltage protection Range 0.5–7.5 V 0.5–10 V 1–15 V 1–24 V 2–36 V 2–44 V

Accuracy 0.06 V 0.08 V 0.125 V 0.20 V 0.30 V 0.40 V

Output ripple and noise7CC rms 200 mA 180 mA 120 mA 76 mA 63 mA 48 mA

Programming resolution

measurement resolution

Voltage 0.72 mV 0.96 mV 1.5 mV 2.4 mV 3.6 mV 4.8 mV

Current 12 mA 10.8 mA 7.2 mA 4.56 mA 3 mA 2.3 mA

Front panel display accuracy

(4 digits; ±1 count)

Voltage 0.03 V 0.04 V 0.06 V 0.10 V 0.15 V 0.20 V

Current 0.50 A 0.45 A 0.30 A 0.19 A 0.13 A 0.10 A

Notes:

1 Minimum voltage is guaranteed to a maximum of 0.2% of the rated output voltage.

Minimum current is guaranteed to a maximum of 0.4% of the rated output current.

2 Up to 20 MHz

3 From 5 Hz – 1 MHz

4 Time for output voltage to recover within 0.5% of its rated output for a load change from 10 to 90% of its rated output current.

Voltage set point from 10% to 100% of rated output

5 Add this to the output reponse time to obtain the total programming time

6 Time to provide data back to the controller using LAN interface (does not include A/D conversion time)

7 From 5 Hz – 1 MHz, at 10% to 100% of output voltage at full load (for 6 V units from 33% to 100% of output voltage)



Unless otherwise noted, specifications are warranted over the ambient temperature range of 0 to 40°C.

N5747A N5748A N5749A N5750A N5751A N5752A

DC output ratings1 Voltage 60 V 80 V 100 V 150 V 300 V 600 V

Current 12.5 A 9.5 A 7.5 A 5 A 2.5 A 1.3 A

Power 750 W 760 W 750 W 750 W 750 W 780 W

Output ripple and noise CV p-p260 mV 80 mV 80 mV 100 mV 150 mV 300 mV

CV rms38 mV 8 mV 8 mV 12 mV 20 mV 60 mV

Load effect

(change from 10% to 90%)

Voltage 8 mV 10 mV 12 mV 17 mV 32 mV 62 mV

Current 7.5 mA 6.9 mA 6.5 mA 6 mA 5.5 mA 5.26 mA

Source effect

(change from 85-132 VAC input

or 170-265 VAC input)

Voltage 8 mV 10 mV 12 mV 17 mV 32 mV 62 mV

Current 3.25 mA 2.95 mA 2.75 mA 2.5 mA 2.25 mA 2.13 mA

Programming accuracy1Voltage 0.05%+ 30 mV 40 mV 50 mV 75 mV 150 mV 300 mV

Current 0.1%+ 12.5 mA 9.5 mA 7.5 mA 5 mA 2.5 mA 1.3 mA

Measurement accuracy Voltage 0.1%+ 60 mV 80 mV 100 mV 150 mV 300 mV 600 mV

Current 0.1%+ 37.5 mA 28.5 mA 22.5 mA 15 mA 7.5 mA 3.9 mA

Load transient recovery time4Time ≤1 ms ≤1 ms ≤1 ms ≤2 ms ≤2 ms ≤2 ms

Supplemental Characteristics Supplemental characteristics are not warranted but are descriptions of typical

performance determined either by design or type testing

Output response time

(settle to within ±1.0% of the

rated output, with a resistive

load)

Up, full load 0.08 s 0.15 s 0.15 s 0.15 s 0.15 s 0.25 s

Down, full load 0.08 s 0.15 s 0.15 s 0.15 s 0.15 s 0.30 s

Down, no load 1.1 s 1.2 s 1.5 s 2.0 s 3.0 s 4.0 s

Command response time555 ms

Data readback transfer time63 ms

Remote sense compensation Volts/load lead 3 V 4 V 5 V 5 V 5 V 5 V

Over-voltage protection Range 5–66 V 5–88 V 5–110 V 5–165 V 5–330 V 5–660 V

Accuracy 0.60 V 0.80 V 1 V 1.5 V 3 V 6 V

Output ripple and noise7CC rms 38 mA 29 mA 23 mA 18 mA 13 mA 8 m

Programming resolution

measurement resolution

Voltage 7.2 mV 9.6 mV 12 mV 18 mV 36 mV 72 mV

Current 1.5 mA 1.14 mA 0.9 mA 0.6 mA 0.3 mA 0.156 mA

Front panel display accuracy

(4 digits; ±1 count)

Voltage 0.3 V 0.4 V 0.5 V 0.75 V 1.5 V 3 V

Current 0.0625 A 0.0475 A 0.0375 A 0.0250 A 0.0125A 0.0065 A

Notes:

1 Minimum voltage is guaranteed to a maximum of 0.2% of the rated output voltage.

Minimum current is guaranteed to a maximum of 0.4% of the rated output current.

2 Up to 20 MHz

3 From 5 Hz – 1 MHz

4 Time for output voltage to recover within 0.5% of its rated output for a load change from 10 to 90% of its rated output current.

Voltage set point from 10% to 100% of rated output

5 Add this to the output reponse time to obtain the total programming time

6 Time to provide data back to the controller using LAN interface (does not include A/D conversion time)

7 From 5 Hz – 1 MHz, at 10% to 100% of output voltage at full load (for 6 V units from 33% to 100% of output voltage)



Unless otherwise noted, specifications are warranted over the ambient temperature range of 0 to 40°C.

N5761A N5762A N5763A N5764A N5765A N5766A

DC output ratings1 Voltage 6 V 8 V 12.5 V 20 V 30 V 40 V

Current 180 A 165 A 120 A 76 A 50 A 38 A

Power 1080 W 1320 W 1500 W 1520 W 1500 W 1520 W

Output ripple and noise CV p-p260 mV 60 mV 60 mV 60 mV 60 mV 60 mV

CV rms38 mV 8 mV 8 mV 8 mV 8 mV 8 mV

Load effect

(change from 10% to 90%)

Voltage 2.6 mV 2.8 mV 3.25 mV 4 mV 5 mV 6 mV

Current 41 mA 38 mA 29 mA 20.2 mA 15 mA 12.6 mA

Source effect

(change from 85-132 VAC input

or 170-265 VAC input)

Voltage 2.6 mV 2.8 mV 3.25 mV 4 mV 5 mV 6 mV

Current 20 mA 18.5 mA 14 mA 9.6 mA 7 mA 5.8 mA

Programming accuracy1Voltage 0.05%+ 3 mV 4 mV 6.25 mV 10 mV 15 mV 20 mV

Current 0.1%+ 180 mA 165 mA 120 mA 76 mA 50 mA 38 mA

Measurement accuracy Voltage 0.1%+ 6 mV 8 mV 12.5 mV 20 mV 30 mV 40 mV

Current 0.1%+ 540 mA 495 mA 360 mA 228 mA 150 mA 114 mA

Load transient recovery time4Time ≤1.5 ms ≤1.5 ms ≤1.5 ms ≤1 ms ≤1 ms ≤1 ms

Supplemental characteristics Supplemental characteristics are not warranted but are descriptions of typical

performance determined either by design or type testing.

Output response time

(settle to within ±1.0% of the

rated output, with a resistive

load)

Up, full load 0.08 s 0.08 s 0.08 s 0.08 s 0.08 s 0.08 s

Down, full load 0.05 s 0.05 s 0.05 s 0.05 s 0.08 s 0.08 s

Down, no load 0.5 s 0.6 s 0.7 s 0.8 s 0.9 s 1.0 s

Command response time555 ms

Data readback transfer time63 ms

Remote sense compensation Volts/load lead 1 V 1 V 1 V 1 V 1.5 V 2 V

Over-voltage protection Range 0.5–7.5 V 0.5–10 V 1–15 V 1–24 V 2–36 V 2–44 V

Accuracy 0.06 V 0.08 V 0.125 V 0.20 V 0.30 V 0.40 V

Output ripple and noise7CC rms 360 mA 330 mA 240 mA 152 mA 125 mA 95 mA

Programming resolution

measurement resolution

Voltage 0.72 mV 0.96 mV 1.5 mV 2.4 mV 3.6 mV 4.8 mV

Current 21.6 mA 19.8 mA 14.4 mA 9.12 mA 6 mA 4.6 mA

Front panel display accuracy

(4 digits; ±1 count)

Voltage 0.03 V 0.04 V 0.0625 V 0.1 V 0.15 V 0.2 V

Current 0.90 A 0.825 A 0.60 A 0.38 A 0.25 A 0.19 A

Notes:

1 Minimum voltage is guaranteed to a maximum of 0.2% of the rated output voltage.

Minimum current is guaranteed to a maximum of 0.4% of the rated output current.

2 Up to 20 MHz

3 From 5 Hz – 1 MHz

4 Time for output voltage to recover within 0.5% of its rated output for a load change from 10 to 90% of its rated output current.

Voltage set point from 10% to 100% of rated output

5 Add this to the output reponse time to obtain the total programming time

6 Time to provide data back to the controller using LAN interface (does not include A/D conversion time)

7 From 5 Hz – 1 MHz, at 10% to 100% of output voltage at full load (for 6 V units from 33% to 100% of output voltage)



Unless otherwise noted, specifications are warranted over the ambient temperature range of 0 to 40°C.

N5767A N5768A N5769A N5770A N5771A N5772A

DC output ratings1 Voltage 60 V 80 V 100 V 150 V 300 V 600 V

Current 25 A 19 A 15 A 10 A 5 A 2.6 A

Power 1500 W 1520 W 1500 W 1500 W 1500 W 1560 W

Output ripple and noise CV p-p260 mV 80 mV 80 mV 100 mV 150 mV 300 mV

CV rms38 mV 8 mV 8 mV 12 mV 20 mV 60 mV

Load effect

(change from 10% to 90%)

Voltage 8 mV 10 mV 12 mV 17 mV 32 mV 62 mV

Current 10 mA 8.8 mA 8 mA 7 mA 6 mA 5.5 mA

Source effect

(change from 85-132 VAC input

or 170-265 VAC input)

Voltage 8 mV 10 mV 12 mV 17 mV 32 mV 62 mV

Current 4.5 mA 3.9 mA 3.5 mA 3 mA 2.5 mA 2.26 mA

Programming accuracy1Voltage 0.05%+ 30 mV 40 mV 50 mV 75 mV 150 mV 300 mV

Current 0.1%+ 25 mA 19 mA 15 mA 10 mA 5 mA 2.6 mA

Measurement accuracy Voltage 0.1%+ 60 mV 80 mV 100 mV 150 mV 300 mV 600 mV

Current 0.1%+ 75 mA 57 mA 45 mA 30 mA 15 mA 7.8 mA

Load transient recovery time4Time ≤1 ms ≤1 ms ≤1 ms ≤2 ms ≤2 ms ≤2 ms

Supplemental Characteristics Supplemental characteristics are not warranted but are descriptions of typical

performance determined either by design or type testing

Output response time

(settle to within ±1.0% of the

rated output, with a resistive

load)

Up, full load 0.08 s 0.15 s 0.15 s 0.15 s 0.15 s 0.25 s

Down, full load 0.08 s 0.15 s 0.15 s 0.15 s 0.15 s 0.30 s

Down, no load 1.1 s 1.2 s 1.5 s 2.0 s 3.0 s 4.0 s

Command response time555 ms

Data readback transfer time63 ms

Remote sense compensation Volts/load lead 3 V 4 V 5 V 5 V 5 V 5 V

Over-voltage protection Range 5–66 V 5–88 V 5–110 V 5–165 V 5–330 V 5–660 V

Accuracy 0.60 V 0.80 V 1 V 1.5 V 3 V 6 V

Output ripple and noise7CC rms 75 mA 57 mA 45 mA 35 mA 25 mA 12 m

Programming resolution

measurement resolution

Voltage 7.2 mV 9.6 mV 12 mV 18 mV 36 mV 72 mV

Current 3 mA 2.28 mA 1.8 mA 1.2 mA 0.6 mA 0.312 mA

Front panel display accuracy

(4 digits; ±1 count)

Voltage 0.3 V 0.4 V 0.5 V 0.75 V 1.5 V 3 V

Current 0.125 A 0.095 A 0.075 A 0.050 A 0.025 A 0.013 A

Notes:

1 Minimum voltage is guaranteed to a maximum of 0.2% of the rated output voltage.

Minimum current is guaranteed to a maximum of 0.4% of the rated output current.

2 Up to 20 MHz

3 From 5 Hz – 1 MHz

4 Time for output voltage to recover within 0.5% of its rated output for a load change from 10 to 90% of its rated output current.

Voltage set point from 10% to 100% of rated output

5 Add this to the output reponse time to obtain the total programming time

6 Time to provide data back to the controller using LAN interface (does not include A/D conversion time)

7 From 5 Hz – 1 MHz, at 10% to 100% of output voltage at full load (for 6 V units from 33% to 100% of output voltage)

Series and parallel capability

Parallel operation

Up to 4 units can be connected in

master/slave mode

Series operation

Up to 2 units can be connected in

series

Output terminal isolation

6 V to 60 V units

No output terminal may be more than

±60 VDC from any other terminal or

chassis ground

80 V to 600 V units

No output terminal may be more than

±600 VDC from any other terminal or

chassis ground

Store-recall states

Volatile memory locations: 16

Analog programming

(of output voltage and current)

Input signal

Selectable;

0 to 5 V / 0 to 10 V full scale

Input impedance

Selectable;

0 to 5 kΩ / 0 to 10 kΩ full scale

Interface capabilities

GPIB

SCPI – 1993, IEEE 488.2 compliant

interface

USB 2.0

Requires Keysight I/O library version

L.01.01

10/100 LAN

Requires Keysight I/O library version

L.01.01

Web server

Built-in Web server requires Internet

Explorer 5+ or Netscape 6.2+

Environmental conditions

Environment

Indoor use, installation category II

(AC input), pollution degree 2

Operating temperature

0°C to 40°C @ 100% load

Storage temperature

–20°C to 70°C

Operating humidity

30% to 90% relative humidity

(no condensation)

Storage humidity

10% to 95% relative humidity

(no condensation)

Altitude

– Up to 3000 meters.

Derate the output current by

2%/100 m above 2000 m.

– Derate the maximum ambient

temperature by 1 °C/100 m above

2000 m.

Regulatory compliance

EMC

– European EMC directive 89/336/

EEC for Class A products

– Australian C- Tick mark

– This ISM device complies with

Canadian ICES-001.

– Cet appareil ISM est conforme à la

norme NMB-001 du Canada.

Safety

– European Low Voltage Directive

73/23/EEC

– US and Canadian safety standards

– Any LEDs used in this product are

Class 1 as per IEC 825-1

Acoustic noise declaration

Emission directive:

– Sound pressure Lp <70 dB(A),

At operator position,

*Normal operation,

*According to EN 27779 (Type

Test).

– Schalldruckpegel Lp <70 dB(A)

*Am Arbeitsplatz, *Normaler

Betrieb, *Nach EN 27779

(Typprüfung).

AC input

Nominal input

100 – 240 VAC; 50/60 Hz

Input current 750 W

10.5 A @ 100 VAC nominal;

5 A @ 200 VAC nominal

Input current 1500 W

21 A @ 100 VAC nominal;

11 A @ 200 VAC nominal

Input range

85 – 265 VAC; 47 – 63 Hz.

Power factor

0.99 at nominal input and rated

output power

Efficiency

76% – 87% for 750 W units;

77% – 88% for 1500 W units

Inrush current

<25 A for 750 W units;

<50 A for 1500 W units

Dimensions

(excluding connectors, and handles)

Height 43.6 mm (1.72 in)

Width 422.8 mm (16.65 in)

Depth 432.8 mm (17.04 in)

Weight

750 W 7 Kg (15.4 lbs.)

1500 W 8.5 Kg (18.7 lbs.)

WARNING Shock Hazard

– For models up to 60 VDC rated output, no point on the output shall be more than ± 60 VDC above or below chassis ground.

– For models greater than 60 VDC rated output, no point on the Positive output shall be more than ± 600 VDC above or below

chassis ground.

– For models greater than 60 VDC rated output, no point on the Negative output shall be more than ± 400 VDC above or

below chassis ground.

Supplemental Characteristics for All Model Numbers

+S+LSNC-LC-S

SW1

GPIB

ANALOG PROGRAMMING NOT ACTIVE AC INPUT

LINK

OFF

10/100 Ethernet

422.8 mm

+V –V

1 2 3 4 5 6 7 8 9

DC AMPSDC VOLTS

PROT FINE LIMIT

POWER

UVL

OVP

OCP REM OUT ON

VOLTAGE CURRENT

N5749A

100 V / 7.5 A / 750 W

Sytem DC Power Supply

482.8 mm

43.6 mm

507.0 mm

433.0 mm

57.8 mm 92.0 mm 92.0 mm

21.0 mm

A A A

Outline Diagram

AC input

Strain-relief detail

1500 W models

DC output

Bus-bar detail

6 V to 60 V

models

39.5 mm

30.0 mm

22.0 mm

8.5 mm

3.0 mm 35.0 mm

Front and Rear Panel Detail

Rear Panel*

(6 V to 60 V, 1500 W Models)

(80 V to 600 V, 1500 W Models)

(6 V to 60 V, 750 W Models)

(80 V to 600 V, 750 W Models)

Front Panel

(All Models)

= air flow (in front, out rear)

Ordering Information

Available models

750 W Models

N5741A System DC Power Supply 6 V, 100 A, 600 W

N5742A System DC Power Supply 8 V, 90 A, 720 W

N5743A System DC Power Supply 12.5 V, 60 A, 750 W

N5744A System DC Power Supply 20 V, 38 A, 760 W

N5745A System DC Power Supply 30 V, 25 A, 750 W

N5746A System DC Power Supply 40 V, 19 A, 760 W

N5747A System DC Power Supply 60 V, 12.5 A, 750 W

N5748A System DC Power Supply 80 V, 9.5 A, 760 W

N5749A System DC Power Supply 100 V, 7.5 A, 750 W

N5750A System DC Power Supply 150 V, 5 A, 750 W

N5751A System DC Power Supply 300 V, 2.5 A, 750 W

N5752A System DC Power Supply 600 V, 1.3 A, 780 W

1500 W Models

N5761A System DC Power Supply 6 V, 180 A, 1080 W

N5762A System DC Power Supply 8 V, 165 A, 1320 W

N5763A System DC Power Supply 12.5 V, 120 A, 1500 W

N5764A System DC Power Supply 20 V, 76 A, 1520 W

N5765A System DC Power Supply 30 V, 50 A, 1500 W

N5766A System DC Power Supply 40 V, 38 A, 1520 W

N5767A System DC Power Supply 60 V, 25 A, 1500 W

N5768A System DC Power Supply 80 V, 19 A, 1520 W

N5769A System DC Power Supply 100 V, 15 A, 1500 W

N5770A System DC Power Supply 150 V, 10 A, 1500 W

N5771A System DC Power Supply 300 V, 5 A, 1500 W

N5772A System DC Power Supply 600 V, 2.6 A, 1560 W

Options

750 W Models

Opt 900 Power Cord, United Kingdom

Opt 902 Power Cord, Europe

Opt 903 Power Cord, USA, Canada

Opt 918 Power Cord, Japan

Opt 922 Power Cord, China

1500 W Models

Opt 861 Unterminated Power Cord,

USA, Canada, Japan, China,

Other

Opt 862 Harmonized Unterminated

Power Cord, Europe

Accessories

N5740A Rack Mount Slide Kit

(required for rack mounting;

standard system 11 rack-

mounting hardware will not

work)

Related Literature

These application notes will help you

compare Keysight system DC sources

with power supplies from other

manufacturers:

–Side-by-Side Comparison: Keysight

N5700 Series System DC Source

and Sorensen DLM DC Power

Supply, AN 1502-1, 5989-1628EN

http://literature.cdn.keysight.com/

5989-1628EN.pdf

–How to Convert from a Sorensen

DLM to an Keysight N5700,

AN 1503-1, 5989-1629EN

http://literature.cdn.keysight.com/

5989-1629EN.pdf

–Side-by-Side Comparison:

Keysight N5700 Series System DC

Source and Xantrex XFR System

Power Supplies, AN 1502-2,

5989-1630EN

http://literature.cdn.keysight.com/

5989-1630EN.pdf

–How to Convert from a Xantrex

XFR to an Keysight N5700,

AN 1503-2, 5989-1631EN

http://literature.cdn.keysight.com/

5989-1631EN.pdf

–Trends in Medium Power (~1 kW)

DC Power Supplies, 5989-1331EN

http://literature.cdn.keysight.com/

5989-1331EN.pdf

Keysight’s IO Libraries Suite ships

with the N5700 to help you quickly

establish an error-free connection

between your PC and instruments -

regardless of the vendor. It provides

robust instrument control and works

with the software development

environment you choose.

For additional description of

Keysight’s IO Libraries Suite

features and installation require-

ments, please go to

www.keysight.com/find/iosuite-

datasheet

myKeysight

www.keysight.com/find/mykeysight

A personalized view into the information most relevant to you.

www.axiestandard.org

AdvancedTCA® Extensions for Instrumentation and Test (AXIe) is an

open standard that extends the AdvancedTCA for general purpose and

semiconductor test. Keysight is a founding member of the AXIe consortium.

www.lxistandard.org

LAN eXtensions for Instruments puts the power of Ethernet and the

Web inside your test systems. Keysight is a founding member of the LXI

consortium.

www.pxisa.org

PCI eXtensions for Instrumentation (PXI) modular instrumentation delivers a

rugged, PC-based high-performance measurement and automation system.

Three-Year Warranty

www.keysight.com/find/ThreeYearWarranty

Keysight’s commitment to superior product quality and lower total cost

of ownership. The only test and measurement company with three-year

warranty standard on all instruments, worldwide.

Keysight Assurance Plans

www.keysight.com/find/AssurancePlans

Up to five years of protection and no budgetary surprises to ensure your

instruments are operating to specification so you can rely on accurate

measurements.

www.keysight.com/quality

Keysight Electronic Measurement Group

DEKRA Certified ISO 9001:2008

Quality Management System

Keysight Channel Partners

www.keysight.com/find/channelpartners

Get the best of both worlds: Keysight’s measurement expertise and product

breadth, combined with channel partner convenience.

www.keysight.com/find/dcpowersupplies

For more information on Keysight

Technologies’ products, applications or

services, please contact your local Keysight

office. The complete list is available at:

www.keysight.com/find/contactus

Americas

Canada (877) 894 4414

Brazil 55 11 3351 7010

Mexico 001 800 254 2440

United States (800) 829 4444



Australia 1 800 629 485

China 800 810 0189

Hong Kong 800 938 693

India 1 800 112 929

Japan 0120 (421) 345

Korea 080 769 0800

Malaysia 1 800 888 848

Singapore 1 800 375 8100

Taiwan 0800 047 866

Other AP Countries (65) 6375 8100

Europe & Middle East

Austria 0800 001122

Belgium 0800 58580

Finland 0800 523252

France 0805 980333

Germany 0800 6270999

Ireland 1800 832700

Israel 1 809 343051

Italy 800 599100

Luxembourg +32 800 58580

Netherlands 0800 0233200

Russia 8800 5009286

Spain 0800 000154

Sweden 0200 882255

Switzerland 0800 805353

Opt. 1 (DE)

Opt. 2 (FR)

Opt. 3 (IT)

United Kingdom 0800 0260637

For other unlisted countries:

www.keysight.com/find/contactus

(BP-06-16-14)

12 | Keysight | N5700 Series System DC Power Supplies - Data Sheet

This information is subject to change without notice.

Published in USA, August 3, 2014

5989-1330EN