12 11 10 9 7 8 5 6 4 3 2 1 H H FOR M3 OR #4 SELF TAPPING SCREWS. G G CKT. NO. 2 F F 11 E E OPTIONAL PEG NOTES: OPTIONAL FLANGE 1) MATERIALS: HOUSING MATERIAL OPTIONS: SEE CHART FOR SPECIFIC PART NYLON, UNFILLED, UL94V-2, COLOR: NATURAL NYLON, UNFILLED, UL94V-2, COLOR: BLACK NYLON, UNFILLED, UL94V-0, COLOR: NATURAL NYLON, UNFILLED, UL94V-0, COLOR: BLACK LCP GLASS FILLED, UL94V-0, COLOR: BLACK IEC 60335-1, 5TH EDITION GLOW WIRE CAPABLE, WITH PRESS FIT PEG -SEE SHEET 3 TERMINALS: BRASS 2) FINISH (PLATING) OPTIONS: SEE CHART FOR SPECIFIC PART "GS" = 0.00076/(.000030) MIN. SELECT GOLD AND 0.00254/(.0000100) SELECT MATTE TIN OVER 0.00127/(.000050) MIN. NICKEL "MS" = 0.00254/(.000100) MIN. MATTE TIN OVER 0.00127/(.000050) MIN. NICKEL 3) PRODUCT SPECIFICATION: PS-5556-004 FOR LCP GLASS FILLED MATERIAL, PS-5556-001 FOR ALL OTHER MATERIALS. 4) PACKAGING: SEE CHART: BULK PER PK-5569-002 TRAY PER PK-5569-003(PEGGED) OR PK-5569-004(FLANGES) 5 CIRCUITS SHOWN PROVIDE THE MAKE-FIRST/BREAK-LAST FEATURE. SEE CHARTS ON SHEETS 3 & 4 FOR SPECIFIC CIRCUIT LOCATIONS. 6) PART MATES WITH MINI-FIT JR. RECEPTACLE #5557. 7) CONNECTORS ARE NOT TO BE MATED OR UNMATED WHILE CIRCUITS ARE LIVE. 8) PARTS ARE NOT DESIGNED FOR CURRENT SHARING. 9) DISCOLORATION IN THE BANDOLIER CARRIER AREA OF THE PIN IS INHERENT TO THE PLATING PROCESS AND IS DUE TO THE MASKING EFFECT OF THE CARRIER. THIS DISCOLORATION, IF PRESENT, IS IN A NON-FUNCTIONAL AREA OF THE PIN AND WILL NOT EFFECT THE PERFORMANCE OF THE HEADER ASSEMBLY. 10) PART CONFORMS TO CLASS "B" REQUIREMENTS OF COSMETIC SPECIFICATION PS-45499-002. 11 FORMING MARKS ARE ACCEPTABLE. 12 CORNER CORE-OUTS ARE OPTIONAL AND MAY OR MAY NOT BE PRESENT. 13) TEXT ON PART IS FOR REFERENCE ONLY. TEXT AND TEXT LOCATION MAY VARY DEPENDING ON PART NUMBER AND/OR TOOL. D C B A DOCUMENT STATUS 12 FORMAT: Eng-lega-master-tb-prod-C REVISION: D DATE: 2018/01/18 P1 RELEASE DATE 11 2019/01/23 10 2.9 (.11) D C B SYMBOLS 12 = 0 4 PLACES = 0 APPLIES TO ALL CIRCUIT SIZES BOTH PEGGED AND FLANGED = 0 IN/MM 4:1 MM 3 PLACES 0.015 2 PLACES 0.38 0.015 0.38 1 PLACE = 0 0 PLACES 7 6 = 0 INCH 4 PLACES = 0 = 0 CURRENT REV DESC: ADD 44130-0046,-0047 . GENERAL TOLERANCES (UNLESS SPECIFIED) ANGULAR TOL C 8 SCALE = 0 = 0 15:48:07 9 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS 0.5 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 5 EC NO: 610608 DRWN: DSTEIER CHK'D: KSAMIEC APPR: FSMITH INITIAL REVISION: DRWN: POLGAR APPR: FSMITH THIRD ANGLE PROJECTION 4 2019/01/17 2019/01/21 2019/01/23 MINI-FIT JR RIGHT ANGLE HEADER ASSY CUSTOM HEADERS PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 1998/01/23 2011/05/18 DRAWING SERIES C-SIZE 44130 3 SD-44130-001 MATERIAL NUMBER PSD 000 CUSTOMER SEE CHART 2 E14 SHEET NUMBER GENERAL MARKET 1 OF 5 1 A 12 11 10 9 8 7 5 6 4 3 2 1 H H 5 MAKE FIRST / BREAK LAST CIRCUIT 5 MAKE FIRST / BREAK LAST CIRCUIT G G F F LAST CKT E D E B D RECOMMENDED HOLE LAYOUT FOR .070/(1.78) MAX. THICK P.C. BOARD VIEWED FROM COMPONENT SIDE FOR 6 THRU 24 CIRCUITS RECOMMENDED HOLE LAYOUT FOR .070/(1.78) MAX. THICK P.C. BOARD VIEWED FROM COMPONENT SIDE FOR 4 CIRCUIT PARTS RECOMMENDED HOLE LAYOUT FOR .070/(1.78) MAX. THICK P.C. BOARD VIEWED FROM COMPONENT SIDE FOR 2 CIRCUIT PARTS C C B B SYMBOLS = 0 = 0 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE IN/MM 4:1 GENERAL TOLERANCES (UNLESS SPECIFIED) = 0 = 0 = 0 A MM 3 PLACES 0.015 2 PLACES 0.38 0.015 0.38 1 PLACE = 0 0 PLACES ANGULAR TOL DOCUMENT STATUS 12 FORMAT: Eng-lega-master-tb-prod-C REVISION: D DATE: 2018/01/18 P1 RELEASE DATE 11 2019/01/23 10 15:48:07 C 9 8 7 6 = 0 INCH 4 PLACES = 0 = 0 CURRENT REV DESC: ADD 44130-0046,-0047 0.5 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 5 EC NO: 610608 DRWN: DSTEIER CHK'D: KSAMIEC APPR: FSMITH INITIAL REVISION: DRWN: POLGAR APPR: FSMITH THIRD ANGLE PROJECTION 4 2019/01/17 2019/01/21 2019/01/23 MINI-FIT JR RIGHT ANGLE HEADER ASSY CUSTOM HEADERS PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 1998/01/23 2011/05/18 DRAWING SERIES C-SIZE 44130 3 SD-44130-001 MATERIAL NUMBER PSD 000 CUSTOMER SEE CHART 2 E14 SHEET NUMBER GENERAL MARKET 2 OF 5 1 A 12 11 10 9 7 8 5 6 4 3 2 1 HOUSING WITH PRESS FIT PEGS H H MAKE FIRST/ BREAK LAST CIRCUIT 5 LAST CIRCUIT G G CIRCUIT 1 F F CIRCUIT 2 E E LAST CKT D D B C RECOMMENDED HOLE LAYOUT FOR .070/(1.78) MAX. THICK P.C. BOARD VIEWED FROM COMPONENT SIDE FOR 6 THRU 24 CIRCUITS C RECOMMENDED HOLE LAYOUT FOR .070/(1.78) MAX. THICK P.C. BOARD VIEWED FROM COMPONENT SIDE FOR 2 CIRCUIT PARTS RECOMMENDED HOLE LAYOUT FOR .070/(1.78) MAX. THICK P.C. BOARD VIEWED FROM COMPONENT SIDE FOR 4 CIRCUIT PARTS B B SYMBOLS = 0 = 0 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE IN/MM 4:1 GENERAL TOLERANCES (UNLESS SPECIFIED) = 0 = 0 = 0 A MM 3 PLACES 0.015 2 PLACES 0.38 0.015 0.38 1 PLACE = 0 0 PLACES ANGULAR TOL DOCUMENT STATUS 12 FORMAT: Eng-lega-master-tb-prod-C REVISION: D DATE: 2018/01/18 P1 RELEASE DATE 11 2019/01/23 10 15:48:07 C 9 8 7 6 = 0 INCH 4 PLACES = 0 = 0 CURRENT REV DESC: ADD 44130-0046,-0047 0.5 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 5 EC NO: 610608 DRWN: DSTEIER CHK'D: KSAMIEC APPR: FSMITH INITIAL REVISION: DRWN: DRWN BY APPR: APPR BY THIRD ANGLE PROJECTION 4 2019/01/17 2019/01/21 2019/01/23 MINI-FIT JR RIGHT ANGLE HEADER ASSY CUSTOM HEADERS PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER XXXX/XX/XX XXXX/XX/XX DRAWING SERIES C-SIZE 44130 3 SD-44130-001 MATERIAL NUMBER PSD 000 CUSTOMER GENERAL MARKET 2 E14 SHEET NUMBER 3 OF 5 1 A 12 10 9 7 8 PKG FINISH SEE NOTE #2 NYLON 94V-2/BLACK TRAY MS 44130-0002 NYLON 94V-2/BLACK TRAY MS 44130-0003 NYLON 94V-0/BLACK TRAY MS 44130-0004 NYLON 94V-0/BLACK TRAY MS 44130-0005 NYLON 94V-0/NATURAL BULK MS 44130-0006 NYLON 94V-0/NATURAL BULK MS 44130-0007 NYLON 94V-0/NATURAL BULK MS 44130-0008 NYLON 94V-0/NATURAL TRAY MS 44130-0009 NYLON 94V-2/NATURAL TRAY MS 44130-0013 NYLON 94V-2/NATURAL TRAY MS 44130-0015 NYLON 94V-0/BLACK TRAY MS 44130-0017 NYLON 94V-0/NATURAL BULK MS 2 1 BULK GS 2 2 5 2 8 8 H 44130-0001 G 11 02 PEG 2 5 BULK MS 8 8 44130-0027 NYLON 94V-0/NATURAL 02 BULK MS 5 5 44130-0028 NYLON 94V-0/NATURAL 04 BULK MS 8 8 8 8 44130-0030 NYLON 94V-0/NATURAL 06 TRAY GS 2 1 2 2 2 2 44130-0031 08 BULK MS 9 9 9 9 9 9 E 2 F 9 STANDARD MATING 3 MAKE FIRST/BREAK LAST (LONGER PIN) 6 9 8.0 STANDARD MATING (.31) D STANDARD MATING MAKE FIRST/BREAK LAST (LONGER PIN) STANDARD MATING C 8 E DIM P (PCB TAIL LENGTH) MAKE FIRST/BREAK LAST (LONGER PIN) 2 5 1 2 DIM P REF (PCB TAIL LENGTH) 4 2 H 04 D 3 V = VOID 44130-0026 NYLON 94V-2/NATURAL 1 4 G F 44130-0024 NYLON 94V-0/NATURAL NYLON 94V-0/NATURAL 5 6 C 5.3 (.21) STANDARD MATING B B SYMBOLS = 0 = 0 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE IN/MM 1:1 GENERAL TOLERANCES (UNLESS SPECIFIED) = 0 = 0 = 0 A MM 3 PLACES 0.015 2 PLACES 0.38 0.015 0.38 1 PLACE = 0 0 PLACES ANGULAR TOL DOCUMENT STATUS 12 FORMAT: Eng-lega-master-tb-prod-C REVISION: D DATE: 2018/01/18 P1 RELEASE DATE 11 2019/01/23 10 15:48:07 C 9 8 7 6 = 0 INCH 4 PLACES = 0 = 0 CURRENT REV DESC: ADD 44130-0046,-0047 0.5 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 5 EC NO: 610608 DRWN: DSTEIER CHK'D: KSAMIEC APPR: FSMITH INITIAL REVISION: DRWN: POLGAR APPR: FSMITH THIRD ANGLE PROJECTION 4 2019/01/17 2019/01/21 2019/01/23 MINI-FIT JR RIGHT ANGLE HEADER ASSY CUSTOM HEADERS PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 1998/01/23 2011/05/18 DRAWING SERIES C-SIZE 44130 3 SD-44130-001 MATERIAL NUMBER PSD 000 CUSTOMER SEE CHART 2 E14 SHEET NUMBER GENERAL MARKET 4 OF 5 1 A 12 11 10 9 PKG 7 8 4 3 2 FINISH SEE NOTE #2 1 V = VOID H 44130-0032 NYLON 94V-0/NATURAL 16 PEG TRAY MS 8 8 8 8 8 8 44130-0036 NYLON 94V-2/NATURAL 06 PEG TRAY MS 2 1 2 2 1 2 44130-0037 NYLON 94V-0/NATURAL 06 PEG TRAY MS 2 V 2 2 V 2 44130-0038 NYLON 94V-0/NATURAL 10 PEG TRAY MS 2 V 2 V 2 2 44130-0039 NYLON 94V-0/NATURAL 04 PEG TRAY MS 1 2 2 2 44130-0040 NYLON 94V-0/NATURAL 04 PEG TRAY MS 2 1 2 2 44130-0041 NYLON 94V-0/NATURAL 06 PEG TRAY GS 2 V 1 2 V 2 44130-0043 NYLON 94V-0/NATURAL 24 FLANGES TRAY MS V 2 V 2 V 44130-0044 (N) LCP 94V-0/BLACK 24 PRESSFIT PEGS TRAY MS V 2 V 2 44130-0045 NYLON 94V-0/NATURAL 24 PEG TRAY MS V 2 V 44130-0046 NYLON 94V-0/NATURAL 24 PEG TRAY GS V 2 44130-0047 NYLON 94V-0/NATURAL 10 PEG TRAY GS 2 V G 5 6 8 8 8 8 8 8 8 8 8 8 V 2 V 2 2 V 2 V 2 V 2 2 V 2 V 2 V 2 V 2 V 2 V V 2 V 2 V 2 V 2 2 V 2 V 2 V 2 V 2 V 2 V 2 V 2 V 2 V 2 V 2 2 V 2 V 2 V 2 V 2 V 2 V V 2 V 2 V 2 V 2 V 2 2 V 2 V 2 V 2 V 2 V 2 V 2 V 2 V 2 V 2 V H G F F E E D D N= NOT TOOLED DIM PREF (PCB TAIL LENGTH) C 1 2 3 B 4 5 6 C MAKE FIRST/BREAK LAST (LONGER PIN) STANDARD MATING MAKE FIRST/BREAK LAST (LONGER PIN) B STANDARD MATING MAKE FIRST/BREAK LAST (LONGER PIN) SYMBOLS = 0 = 0 STANDARD MATING THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE IN/MM 1:1 GENERAL TOLERANCES (UNLESS SPECIFIED) = 0 8 5.3 (.21) STANDARD MATING = 0 = 0 A MM 3 PLACES 0.015 2 PLACES 0.38 0.015 0.38 1 PLACE = 0 0 PLACES ANGULAR TOL DOCUMENT STATUS 12 FORMAT: Eng-lega-master-tb-prod-C REVISION: D DATE: 2018/01/18 P1 RELEASE DATE 11 2019/01/23 10 15:48:07 C 9 8 7 6 = 0 INCH 4 PLACES = 0 = 0 CURRENT REV DESC: ADD 44130-0046,-0047 0.5 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 5 EC NO: 610608 DRWN: DSTEIER CHK'D: KSAMIEC APPR: FSMITH INITIAL REVISION: DRWN: POLGAR APPR: FSMITH THIRD ANGLE PROJECTION 4 2019/01/17 2019/01/21 2019/01/23 MINI-FIT JR RIGHT ANGLE HEADER ASSY CUSTOM HEADERS PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 1998/01/23 2011/05/18 DRAWING SERIES C-SIZE 44130 3 SD-44130-001 MATERIAL NUMBER PSD 000 CUSTOMER SEE CHART 2 E14 SHEET NUMBER GENERAL MARKET 5 OF 5 1 A