©2009 Semiconductor Components Industries, LLC.
October-2017, Rev. 3
Publication Order Number:
ISL9V5036S3S/D
ISL9V5036S3S / ISL9V5036P3 / ISL9V5036S3
Device Maximu m Ratings TA = 25°C unless otherwise noted
Symbol Parameter Ratings Units
BVCER Collector to Emitter Breakdown Voltage (IC = 1 mA) 390 V
BVECS Emitter to Collector Voltage - Reverse Battery Condition (IC = 10 mA) 24 V
ESCIS25 At Starting TJ = 25°C, ISCIS = 38.5A, L = 670 µHy 500 mJ
ESCIS150 At Starting TJ = 150°C, ISCIS = 30A, L = 670 µHy 300 mJ
IC25 Collector Current Continuous, At TC = 25°C, See Fig 9 46 A
IC110 Collector Current Continuous, At TC = 110°C, See Fig 9 31 A
VGEM Gate to Emitter Voltage Continuous ±10 V
PDPower Dissipation Total TC = 25°C 250 W
Power Dissipation Derating TC > 25°C 1.67 W/°C
TJOperating Junction Temperature Range -40 to 175 °C
TSTG Storage Junction Temperature Range -40 to 175 °C
TLMax Lead Tem p for Soldering (Leads at 1.6mm from Case for 10s) 300 °C
Tpkg Max Lead Temp for Soldering (Package Body for 10s) 260 °C
ESD Electrostatic Discharge Voltage at 100pF, 1500Ω4kV
ISL9V5036S3S / ISL9V5036P3 / ISL9V5036S3
EcoSPARK 500mJ , 360V, N-Channel Ignition IGBT
General Description
The ISL9V5036S3S, ISL9V5036P3, and ISL9V5036S3 are the next
generation IGBTs that offer outstanding SCIS capability in the D²-
Pak (TO-263) and TO-220 plastic package. These devices are
intended for use in automotive ignition circuits, specifically as coil
drivers. Internal diodes provide voltage clamping without the need
for external components.
devices can be custom made to specific clamp
voltages. Contact your nearest ON Semiconductor sales
office for more information.
Formerly Developmental Type 49 443
Applications
• Automotive Ignition Coil Driver Circuits
• Coil-On Plug Applications
Features
• Industry Standard D2-Pak package
• SCIS Energy = 500mJ at TJ = 25oC
•Logic Level Gate Drive
Package
COLLECTOR
(FLANGE)
E
G
GATE
COLLECTOR
EMITTER
R
2
R
1
Symbol
D²-Pak
JEDEC TO-263AB JEDEC TO-220AB
EG
C
COLLECTOR
(FLANGE)
JEDEC TO-262AA
EG
C
• Qualified to AEC Q101
• RoHS Compliant
®
EcoSPARK®
www.onsemi.com
2
ISL9V5036S3S / ISL9V5036P3 / ISL9V5036S3
Package Marking and Ordering Information
Electrical Characteristics TA = 25°C unless otherwise noted
Off State Characteristics
On State Characteristics
Dynamic Characteristics
Switching Characteristics
Thermal Ch ara cteris t ics
Device Marking Device Pac kage Reel Size Tape Width Quantity
V5036S ISL9V5036S3ST TO-263AB 330mm 24mm 800
V5036P ISL9V5036P3 TO-220AA Tube N/A 50
V5036S ISL9V5036S3 TO-262AA Tube N/A 50
V5036S ISL9V5036S3S TO-263AB Tube N/A 50
Symbol P arameter Test Conditions Min Typ Max Units
BVCERCollector to Emitter Breakdown Voltage IC = 2mA, VGE = 0,
RG = 1KΩ, See Fig. 15
TJ = -40 to 150°C
330 360 390 V
BVCESCollector to Emitter Breakdown Voltage IC = 10mA, VGE = 0,
RG = 0, See Fig. 15
TJ = -40 to 150°C
360 390 420 V
BVECSEmitter to Collector Breakdown Voltage IC = -75mA, VGE = 0V,
TC = 25°C 30 - - V
BVGESGate to Emitter Breakdown Voltage IGES = ± 2mA ±12 ±14 - V
ICERCollector to Emitter Leakage Current VCER = 250V,
RG = 1KΩ,
See Fig. 11
TC = 25°C- - 25 µA
TC = 150°C- - 1 mA
IECSEmitter to Collector Leakage Current VEC = 24V, See
Fig. 11 TC = 25°C- - 1 mA
TC = 150°C- - 40 mA
R1Series Gate Resistance - 75 - Ω
R2Gate to Emitter Resistance 10K - 30K Ω
VCE(SAT) Collector to Emitter Saturation Voltage IC = 10A,
VGE = 4.0V TC = 25°C,
See Fig. 4 - 1.17 1.60 V
VCE(SAT) Collector to Emitter Saturation Voltage IC = 15A,
VGE = 4.5V TC = 150°C - 1.50 1.80 V
QG(ON) Gate Charge IC = 10A, VCE = 12V,
VGE = 5V, See Fig. 14 -32-nC
VGE(TH) Gate to Emitter Threshold Voltage IC = 1.0mA,
VCE = VGE,
See Fig. 10
TC = 25°C1.3 - 2.2 V
TC = 150°C0.75- 1.8V
VGEPGate to Emitter Plateau Voltage IC = 10A, VCE = 12V - 3.0 - V
td(ON)R Current Tu rn-On Delay Time-Resistive VCE = 14V, RL = 1Ω,
VGE = 5V, RG = 1KΩ
TJ = 25°C, See Fig. 12
-0.74µs
trR Current Rise Time-Resistive - 2.1 7 µs
td(OFF)L Current Turn-Off Delay Time-Inductive VCE = 300V, L = 2mH,
VGE = 5V, RG = 1KΩ
TJ = 25°C, See Fig. 12
- 10.8 15 µs
tfL Current Fall Time-Inductive - 2.8 15 µs
SCIS Self Clamped Inductive Switching TJ = 25°C, L = 670 µH,
RG = 1KΩ, VGE = 5V, See
Fig. 1 & 2
- - 500 mJ
RθJC Thermal Resist ance Junction-Case TO-263, TO-220, TO-262 - - 0.6 °C/W
ISL9V5036S3S / ISL9V5036P3 / ISL9V5036S3
Typical Characteristics
Figure 1. Self Clamped Inductive Switching
Current vs Time in Clamp Figure 2. Self Clamped Inductive Switching
Current vs Inductance
Figure 3. Collector to Emitter On-State Voltage vs
Junction Tem peratu r e Figure 4.Colle ctor to Emitte r On-State Volta ge vs
Junction Temperature
Figure 5. Collector Current vs Collector to Emitter
On-State Voltage Figure 6. Collector Current vs Collector to Emitter
On-State Voltage
tCLP, TIME IN CLAMP (µS)
ISCIS, INDUCTIVE SWITCHING CURRENT (A)
35
30
10
45
20
25
0350300025010050 150 200
TJ = 25°C
RG = 1KΩ, VGE = 5V,Vdd = 14V
5
15
40
SCIS Curves valid for Vclamp Voltages of <390V
TJ = 150°C
ISCIS, INDUCTIVE SWITCHING CURRENT (A)
0102468
L, INDUCTANCE (mHy)
TJ = 150°C
RG = 1KΩ, VGE = 5V,Vdd = 14V
TJ = 25°C
SCIS Curves valid for Vclamp Voltages of <390V
35
30
10
45
20
25
0
5
15
40
1.10
1.05
1.00
0.95
0.90
25-25 17512575-50 0 50 100 150
TJ, JUNCTION TEMPERATURE (°C)
VCE, COLLECTOR TO EMITTER VOLTAGE (V)
VGE = 4.0V
VGE = 3.7V
VGE = 5.0V
VGE = 8.0V
ICE = 6A
VGE = 4.5V
0.85 25-25 17512575-50 0 50 100 150
1.25
1.20
1.15
1.10
1.05
VCE, COLLECTOR TO EM ITTER VOLTAGE (V)
1.00
TJ, JUNCTION TEMPERATURE (°C)
ICE = 10A
VGE = 4.0V
VGE = 3.7V
VGE = 4.5V
VGE = 5.0V
VGE = 8.0V
ICE, COLLECTOR TO EMITTER CURRENT (A)
VCE, COLLECTOR TO EMIT TER VOLTAGE (V)
20
40
02.01.0 3.0 4.0
50
30
10
0
VGE = 4.0V
VGE = 3.7V
VGE = 4.5V
VGE = 5.0V
VGE = 8.0V
TJ = - 40°C
ICE, COLLECTOR TO EMITTER CURRENT (A)
VCE, COLLECTOR TO EMITTER VOLTAGE (V)
40
0
50
30
02.01.0 3.0 4.0
20
10
VGE = 4.0V
VGE = 3.7V
VGE = 4.5V
VGE = 5.0V
VGE = 8.0V
TJ = 25°C
www.onsemi.com
3
ISL9V5036S3S / ISL9V5036P3 / ISL9V5036S3
Figure 7. Collector to Emitter On-State Voltage vs
Collector Current Figure 8. Transfer Characteristics
Figure 9. DC Collector Current vs Case
Temperature Figure 10. Threshold Voltage vs Junction
Temperature
Figure 11. Leakage Current vs Junction
Temperature Figure 12. Switching Time vs Junction
Temperature
Typical Characteristics (Continued)
ICE, COLLECTOR TO EMITTER CURRENT (A)
VCE, COLLECTOR TO EMITTER VOLTAGE (V)
0
50
40
02.01.0 3.0 4.0
30
TJ = 175°C
VGE = 4.0V
VGE = 3.7V
VGE = 4.5V
VGE = 5.0V
VGE = 8.0V
20
10
ICE, COLLECTOR TO EMITT ER CURRENT (A)
VGE, GATE TO EMITTER VOLTAGE (V)
2.01.0 3.0 4.0
50
40
30
02.51.5 3.5 4.5
PULSE DURATION = 250µs
DUTY CYCLE < 0.5%, VCE = 5V
TJ = 25°C
TJ = 175°C
TJ = -40°C
20
10
ICE, DC COLLECTOR CURRENT (A)
TC, CASE TEMPERATURE (°C)
50
25 1751257550 100 150
40
30
20
10
0
VGE = 4.0V
17550 100
2.0
1.8
1.6
1.4
1.0
VTH, THRESHOLD VOLTAGE (V)
TJ, JUNCTION TEMPERATURE (°C)
1500 125
1.2
VCE = VGE
ICE = 1mA
-50 7525-25
LEAKAGE CURRENT (µ A)
TJ, JUNCTION TEMPERATURE (°C)
1000
10
0.1
10000
100
1
25-25 17512575-50 0 50 100 150
VECS = 24V
VCES = 300V
VCES = 250V
25 1751257550 100 150
TJ, JUNCTION TEMPERATURE (°C)
SWITCHING TIME (µS)
20
16
12
6
2
ICE = 6.5A, VGE = 5V, RG = 1KΩResistive tOFF
Inductive tOFF
Resistive tON
10
14
18
8
4
www.onsemi.com
4
ISL9V5036S3S / ISL9V5036P3 / ISL9V5036S3
Figure 13. Capacitance vs Collector to Emitter
Voltage Figure 14. Gate Charge
Figure 15. Breakdown Voltage vs Series Gate Resistance
Figure 16. IGBT Normalized Transient Therm al Impe danc e, Junc tion to Case
Typical Characteristics (Continued)
C, CAPACITANCE (pF)
VCE, COLLECTOR TO EMITTER VOLTAGE (V)
3000
1000
500
1500
0105 152025
0
CIES
FREQUENCY = 1 MHz
COES
CRES
2500
2000
QG, GATE CHARGE (nC)
VGE, GATE TO EMITTER VOLTAGE (V)
0
2
4
8
01020304050
3
5
7
6
1
IG(REF) = 1mA, RL = 0.6Ω, TJ = 25°C
VCE = 6V
VCE = 12V
BVCER, BREAKDOWN VOLTAGE (V)
RG, SERIES GATE RESI STANCE (kΩ)
360
352
348
356
10 20001000 3000
344
100
354
350
358
346
TJ = - 40°C
TJ = 25°C
TJ = 175°C
ICER = 10mA
342
340
ZthJC, NORMALIZED THERMAL RESPONSE
T1, RECTANGULAR PULSE DURATION (s)
100
10-2
10-1
10-2
10-3
10-4
10-5 10-1
10-6
t
1
t
2
P
D
DUTY FACTOR, D = t
1
/ t
2
PEAK T
J
= (P
D
X Z
θ
JC
X R
θ
JC
) + T
C
0.5
0.2
0.1
0.05
0.02
0.01
SINGLE PUL SE
10-3
10-4
www.onsemi.com
5
ISL9V5036S3S / ISL9V5036P3 / ISL9V5036S3
Test Circuits and Waveforms
Figure 17. Inductive Switching Test Circuit Figure 18. tON and tOFF Switching Test Circuit
Figure 19. Energy Test Circuit Figure 20. Energy Waveforms
RG
G
C
E
VCE
L
PULSE
GEN DUT RG = 1KΩ+
-
VCE
DUT
5V
C
G
E
LOAD
R
or
L
tP
VGS
0.01Ω
L
IAS
+
-
VCE
VDD
RG
DUT
VARY tP TO OBTAIN
REQUIRED PEAK IAS
0V
VDD
VCE
BVCES
tP
IAS
tAV
0
www.onsemi.com
6
ISL9V5036S3S / ISL9V5036P3 / ISL9V5036S3
SPICE Thermal Model
REV 1 May 20 02
ISL9V5036S3S / ISL9V3536P3 / ISL9V5036S3
CTHERM1 th 6 4.0e2
CTHERM2 6 5 3.6e-3
CTHERM3 5 4 4.9e-2
CTHERM4 4 3 3.2e-1
CTHERM5 3 2 3.0e-1
CTHERM6 2 tl 1.6e-2
RTHERM1 th 6 1.0e-2
RTHERM2 6 5 1.4e-1
RTHERM3 5 4 1.0e-1
RTHERM4 4 3 9.0e-2
RTHERM5 3 2 9.4e-2
RTHERM6 2 tl 1.9e-2
SABER Thermal Model
SABER thermal model
ISL9V5036S3S / ISL9V5036P3 / ISL9V5036S3
template thermal_model th tl
therma l _c th, tl
{
ctherm.ctherm1 th 6 = 4.0e2
ctherm.ctherm2 6 5 = 3.6e-3
ctherm.ctherm3 5 4 = 4.9e-2
ctherm.ctherm4 4 3 = 3.2e-1
ctherm.ctherm5 3 2 = 3.0e-1
ctherm.cthe rm6 2 tl = 1.6e -2
rtherm. rtherm1 th 6 = 1.0e-2
rtherm. rtherm2 6 5 = 1.4e-1
rtherm. rtherm3 5 4 = 1.0e-1
rtherm. rtherm4 4 3 = 9.0e-2
rtherm. rtherm5 3 2 = 9.4e-2
rtherm. rtherm6 2 tl = 1. 9e-2
}
RTHERM4
RTHERM6
RTHERM5
RTHERM3
RTHERM2
RTHERM1
CTHERM4
CTHERM6
CTHERM5
CTHERM3
CTHERM2
CTHERM1
tl
2
3
4
5
6
th JUNCTION
CASE
www.onsemi.com
7
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
© Semiconductor Components Industries, LLC
❖
