T-1 3/4 (5mm) BI-COLOR INDICATOR LAMP Part Number: L-57SURKCGKC Hyper Red Green Features Description z Low power consumption. The Hyper Red source color devices are made with Al- z Long life - solid state reliability. GaInP on GaAs substrate Light Emitting Diode. z RoHS compliant. The Green source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAF3335 REV NO: V.4A APPROVED: WYNEC CHECKED: Allen Liu DATE: DEC/22/2011 DRAWN: C.H.Han PAGE: 1 OF 7 ERP: 1101016009 Selection Guide Part No. Dice Lens Type Iv (mcd) [2] @ 20mA Min. Typ. 400 1500 *150 *450 100 180 *100 *180 Viewing Angle [1] 21/2 Hyper Red (AlGaInP) L-57SURKCGKC Water Clear Green (AlGaInP) 30 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. * Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Hyper Red Green 650 574 D [1] Dominant Wavelength Hyper Red Green 630 570 1/2 Spectral Line Half-width Hyper Red Green C Capacitance VF [2] Forward Voltage Max. Units Test Conditions *645 *574 nm IF=20mA *630 *570 nm IF=20mA 28 20 nm IF=20mA Hyper Red Green 35 15 pF VF=0V;f=1MHz Hyper Red Green 1.95 2.1 V IF=20mA 2.5 2.5 Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. * Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25C Parameter Hyper Red Green Units Power dissipation 75 75 mW DC Forward Current 30 30 mA Peak Forward Current [1] 185 150 mA Operating / Storage Temperature -40C To +85C Lead Solder Temperature [2] 260C For 3 Seconds Lead Solder Temperature [3] 260C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAF3335 REV NO: V.4A APPROVED: WYNEC CHECKED: Allen Liu DATE: DEC/22/2011 DRAWN: C.H.Han PAGE: 2 OF 7 ERP: 1101016009 L-57SURKCGKC Hyper Red SPEC NO: DSAF3335 REV NO: V.4A APPROVED: WYNEC CHECKED: Allen Liu DATE: DEC/22/2011 DRAWN: C.H.Han PAGE: 3 OF 7 ERP: 1101016009 Green SPEC NO: DSAF3335 REV NO: V.4A APPROVED: WYNEC CHECKED: Allen Liu DATE: DEC/22/2011 DRAWN: C.H.Han PAGE: 4 OF 7 ERP: 1101016009 PACKING & LABEL SPECIFICATIONS SPEC NO: DSAF3335 REV NO: V.4A APPROVED: WYNEC CHECKED: Allen Liu L-57SURKCGKC DATE: DEC/22/2011 DRAWN: C.H.Han PAGE: 5 OF 7 ERP: 1101016009 SPEC NO: DSAF3335 REV NO: V.4A APPROVED: WYNEC CHECKED: Allen Liu DATE: DEC/22/2011 DRAWN: C.H.Han PAGE: 6 OF 7 ERP: 1101016009 SPEC NO: DSAF3335 REV NO: V.4A APPROVED: WYNEC CHECKED: Allen Liu DATE: DEC/22/2011 DRAWN: C.H.Han PAGE: 7 OF 7 ERP: 1101016009