HRF-SW1030-FL-TR - HONEYWELL - Datasheet.Directory

HRF-SW1030

SP6T Absorptive RF Switch DC to 2.5GHz Operation

The Honeywell HRF-SW1030 is a high performance single pole six throw (SP6T)

absorptive RF switch ideal for use in wireless basestation and handset applications

that require minimum power and minimum insertion loss.

The HRF-SW1030 is manufactured with Honeywell's patented Silicon On Insulator

(SOI) CMOS technology, which provides the performance of GaAs with the economy

and integration capabilities of conventional CMOS technology. These switches are

DC coupled to improve lower operating frequency, frequency response and reduce

the number of DC bias points required.

FEATURES

Typical High Isolation Of > 42 dB @ 2 GHz

Typical Low Insertion Loss Of 1.6 dB @ 1 GHz

Integrated CMOS Control Logic

DC-coupled, bi-directional RF Path

Single Positive Supply Voltage

Ultra Small VQFN Packaging

Impedance matched for 50 Ohm systems

Lead-free, RoHS compliant and halogen-free

RF ELECTRICAL SPECIFICATIONS @ + 25oC

Results @ VDD = 5.0 +/- 10%, VSS = 0 unless otherwise stated, Z0 = 50 Ohms

Contact Honeywell for relative performance at other supply configurations

Parameter

Test Condition

Frequency

Minimum

Typical

Maximum

Units

Insertion Loss

1.0 GHz

2.0 GHz

2.5 GHz

1.6

2.1

2.4

2.5

3.3

3.8

dB

Isolation

1.0 GHz

2.0 GHz

3.0 GHz

36

30

27

50

42

40

dB

Return Loss

-10

-15

dB

Input P1dB

VSS =Gnd

VSS = -5V

1.0 GHz

16

25

dBm

Input IP3

Two-Tone Inputs, + 5 dBm

VSS = Gnd

VSS = -5V

2.0 GHz

33

35

dBm

Trise, Tfall

Ton, Toff

10% To 90%

50% Cntl To 90% / 10% RF

10

20

ns

HRF-SW1030 in VQFN Package

HRF-SW1030

2 www.honeywell.com/microwave

DC ELECTRICAL SPECIFICATIONS @ + 25°C

Parameter

Minimum

Typical

Maximum

Units

VDD

3.31

5.0

5.5

V

VSS

-5.0

V

IDD

<5

35

uA

CMOS Logic Level (0)

0

0.8

V

CMOS Logic Level (1)

VDD – 0.8

VDD

V

Input Leakage Current

10

uA

Note 1 - Performance curves are for VDD = +5.0 +/- 10%

ABSOLUTE MAXIMUM RATINGS1

Parameter

Absolute Maximum

Units

VDD

+6.0

V

VSS

-5.5

V

Vin Digital Logic 0

-0.6

V

Vin Digital Logic 1

VDD + 0.6

V

Input Power

> 35

dBm

ESD Voltage2

400

V

Moisture Sensitivity Level

Level 3 @ 260OC

Operating Temperature Range

-40 to +85

°C

Storage Temperature Range

-65 to +125

°C

Note 1 - Operation of this device beyond any of these parameters may cause permanent damage.

Note 2 - Although the HRF-SW1030 contains ESD protection circuitry on all digital inputs, precautions should be taken to

ensure that the Absolute Maximum Ratings are not exceeded.

Latch-Up: Unlike conventional CMOS digital switches, Honeywell’s HRF-SW1030 is immune to latch-up.

TRUTH TABLE

C2

C1

C0

RF Output

1

RF Output

2

RF Output

3

RF Output

4

RF Output

5

RF Output

6

0

1

0

1

0

1

0

1

0

1

0

RFINPUT

"0" = CMOS Low, "1” = CMOS High

Note: For codes 000 and 111 all outputs are in the terminated isolation state.

PIN CONFIGURATIONS

Function

1

GROUND

7

VDD

13

GROUND

19

GROUND

2

GROUND

8

C2

14

GROUND

20

GROUND

3

RFOUTPUT5

9

C1

15

RFOUTPUT2

21

RFINPUT

4

GROUND

10

C0

16

GROUND

22

GROUND

5

GROUND

11

VSS

17

GROUND

23

GROUND

6

RFOUTPUT4

12

RFOUTPUT3

18

RFOUTPUT1

24

RFOUTPUT6

Note: Bottom ground plate must be grounded for proper RF performance.

HRF-SW1030

www.honeywell.com/microwave 3

PERFORMANCE CURVES

Insertion Loss

Isolation

Typical SW1030 Insertion Loss

-4.5

-4.0

-3.5

-3.0

-2.5

-2.0

-1.5

-1.0

-0.5

0.0

0.0 0.5 1.0 1.5 2.0 2.5

Frequency (GHz)

Insertion Loss (dB)

Typical SW1030 Isolation

-70

-65

-60

-55

-50

-45

-40

-35

-30

-25

0 0.5 1 1.5 2 2.5

Frequency (GHz)

Isolation (dB)

HRF-SW1030

4 www.honeywell.com/microwave

PACKAGE OUTLINE DRAWING

HALOGEN-FREE MATERIAL SET

The –FL switches have a halogen-free material set that can withstand a maximum soldering temperature of 260OC.

LEAD FINISH

The package leads are Nickel Palladium with a Gold and Silver flash (NiPdAu+Ag). The configuration being manufactured

and delivered today is lead-free and RoHS compliant. Plating thicknesses are listed below in microns (um).

Ni = 0.254 um min

Pd = 0.00254 um min

Au+Ag = 0.00508 um min

Au Composition = 30% min to 70% max

LEAD FREE QFN SURFACE MOUNT APPLICATION

Please see Application Note AN310a for assembly process recommendations. The maximum soldering temperature of

the - FL is 260oC. Application Notes can be found at our website: www.honeywell.com/microwave

CIRCUIT APPLICATION INFORMATION

These switches require a DC reference to ground. They may not operate properly when AC coupled on both the RF input

and output without a DC ground reference provided as part of the circuit. See Application Note AN311.

Notes

1. Pin 1 identifier can be a combination or a dot and/or chamfer. A chamfer is on the bottom ground plane.

2. Dimensions are in millimeters.

HRF-SW1030

www.honeywell.com/microwave 5

EVALUATION CIRCUIT BOARD

Honeywell's evaluation board provides an easy to use method of evaluating the RF performance of our switch. Simply

connect power; DC and RF signals to be measuring switch performance in less than 10 minutes.

EVALUATION CIRCUIT BOARD LAYOUT DESIGN DETAILS

Item

Description

PCB

Impedance Matched Multi-Layer FR4

Switch

HRF-SW1030 Digital Switch

Chip Capacitor

Panasonic Model ECU-E1C103KBQ Capacitor, .01uf 0402 10% 16V

RF Connector

Johnson Connectors Model 142-0701-801 SMA RF Coaxial Connector

DC Pin

Mil-Max Model 800-10-064-10-001 Header Pins

ORDERING INFORMATION

Ordering Number

Delivery Method

Units Per Shipment

HRF-SW1030-FL-TR

HRF-SW1030-E

Tape & Reel

Evaluation Board

2500 Units per Reel

One Board Per Box

The new –FL switches replace and are electrically equivalent with the –GR switches. The –GR switches are obsolete.

FIND OUT MORE

For more information on Honeywell’s Microwave Products visit us online at www.honeywellmicrowave.com or contact

us at 800-323-8295 (763-954-2474 internationally).

Honeywell reserves the right to make changes to improve reliability, function or design. Honeywell does not assume any liability arising out of the

application or use of any product or circuit described herein; neither does it convey any license under its patent rights nor the rights of others.

Honeywell

12001 Highway 55

Plymouth, MN 55441

Tel: 800-323-8295

www.honeywellmicrowave.com

Form #1030W

May 2012

HRF-SW1030 Evaluation Board

HRF-SW1030

Evaluation Board

Top View

HRF-SW1030

Honeywell

RF Out5

RF Out1

RF Input

RF Out3

Gnd

VDD

C2

C1

C0

VSS

Gnd

RF Out4

RF Out2

RF Out6