363 Adjustable Range Reflective Photoelectric Sensor EQ-500 SERIES FIBER SENSORS Related Information General terms and conditions.............. F-7 Glossary of terms / General precautions........P.1455~ / P.1458~ Amplifier Built-in Multi-voltage Sensor selection guide................... P.271~ China's CCC mark......................... P.1505 LASER SENSORS PHOTOELECTRIC SENSORS Conforming to Low Voltage and EMC Directive MICRO PHOTOELECTRIC SENSORS ( DC-voltage type conforms to EMC directive only ) Recognition AREA SENSORS LIGHT CURTAINS / SAFETY COMPONENTS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS Certified (Multi-voltege type only) PARTICULAR USE SENSORS SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS MEASUREMENT SENSORS STATIC ELECTRICITY PREVENTION DEVICES LASER MARKERS PLC HUMAN MACHINE INTERFACES ENERGY CONSUMPTION VISUALIZATION COMPONENTS FA COMPONENTS MACHINE VISION SYSTEMS panasonic.net/id/pidsx/global Long range sensing capability to 2.5 m 8.202 ft Stable sensing unaffected by color or material Long sensing range Impervious to variations color or angle An adjustable range to 2.5 m 8.202 ft allows plenty of space for installation. 1 m 3.281 ft sensing range type also available. Adjust the volume easily to suit your needs when using at close range. The optical system has been optimized. Since the sensor is hardly influenced at all by angles or the gloss of objects compared to the previous model, it is possible to detect both white objects and black objects at almost a constant distance. UV CURING SYSTEMS Hardly affected by background objects Selection Guide Amplifier Built-in Power Supply Built-in Amplifierseparated CX-400 CY-100 EX-10 EX-20 EX-30 EX-40 CX-440 EQ-30 EQ-500 The difference in sensing range between white non-glossy paper and gray non-glossy paper (lightness: 5) is approx 5% when set at a distance of 2 m 6.562 ft. Because the sensor doesn't detect objects outside the preset sensing field by using the 2-segment photodiode adjustable range system, it will not malfunction even if someone walks behind the sensing object or machines or conveyors are in the background. Note: Please note that malfunction may occur when there are specular objects or objects with a mirror-like surface in the background. Refer to p.368 "Mounting" of "PRECAUTIONS FOR PROPER USE" section. MOUNTING OPERABILITY Convenient terminal block type An easy to set adjuster with indicator Cabling enabled by way of a terminal block that eliminates waste. Equipped with a 2-turn adjuster with indicator, making it easy to set for short or long distances. Terminal block Distance adjuster (2-turn) Adjuster indicator Conduit connector MQ-W RX-LS200 OFF-delay timer adjuster (Note) RX RT-610 ON-delay timer adjuster (Note) Note: For EQ-5T only. Adjustable Range Reflective Photoelectric Sensor 364 EQ-500 SERIES APPLICATIONS FIBER SENSORS Level check within the hopper The distance to the object can be set to enable residual amount sensing in the hopper regardless of color. Confirmation of the passage of packages on a conveyor belt LASER SENSORS Can accurately detect packages even if they vary in size and color. PHOTOELECTRIC SENSORS MICRO PHOTOELECTRIC SENSORS AREA SENSORS LIGHT CURTAINS / SAFETY COMPONENTS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS VARIETIES Equipped with both NPN and PNP outputs EQ-51 EQ-50 Multi-voltage We've added a DC-voltage type with NPN and PNP transistor outputs all in one sensor. Its BGS / FGS function controls any background effects for more stable sensing. Because it can function with 24 to 240 V AC and 12 to 240 V DC, almost any power supply anywhere in the world will do. Convenient timer function models * Operation: ON-delay, OFF-delay * Timer period: 0 .1 to 5 sec. (individual setting possible) WIRE-SAVING SYSTEMS STATIC ELECTRICITY PREVENTION DEVICES LASER MARKERS PLC HUMAN MACHINE INTERFACES ENERGY CONSUMPTION VISUALIZATION COMPONENTS FA COMPONENTS FUNCTIONS EQ-51 BGS / FGS functions make even the most challenging settings possible! The BGS function is best suited for background not present The FGS function is best suited for background present When object and background are separated BGS (Background suppression) function When object and background are close together When the object is glossy or uneven FGS (Foreground suppression) function The sensor judges that an object is present when light is received at position A of the light-receiving element (2-segment element). This is useful if the object and background are far apart. Not affected if the background color changes or someone passes behind the conveyor. OFF The sensor judges that no object is present when light is received at position B of the light receiving element (2-segment element) (The conveyor is detected). This function is useful if the object and the background are close together or if the object is glossy or uneven. However, sensing is impossible if there is no background (conveyor, etc.). OFF in this condition only ON Light received at element A Light received at element B or light not received Element A Background SIMPLE WIRE-SAVING UNITS MEASUREMENT SENSORS Types with an ON-delay / OFF-delay timer available. OFF-delay, e.g. useful when the response of the connected device is slow, ON-delay, e.g. useful to detect objects that take a long time to move. Object present OFF ON Element B Object Setting distance UV CURING SYSTEMS Selection Guide Amplifier Built-in Power Supply Built-in Amplifierseparated CX-400 EX-10 For glossy object EX-20 ON EX-30 Element A EX-40 Emitting element CX-440 Lens Setting distance Conveyor Light received at element B A conveyor or other background must be present. MACHINE VISION SYSTEMS CY-100 ON in all other conditions Object absent Element B Moving object in the back SENSOR OPTIONS Conveyor Light received at element A Note: Refer to "BGS / FGS function (p.369)" of "PRECAUTIONS FOR PROPER USE" for operation of BGS / FGS function. Conveyor Light is not received at element B, so an object is judged to be present EQ-30 EQ-500 MQ-W RX-LS200 RX RT-610 365 FIBER SENSORS LASER SENSORS PHOTOELECTRIC SENSORS MICRO PHOTOELECTRIC SENSORS AREA SENSORS Adjustable Range Reflective Photoelectric Sensor EQ-500 SERIES ENVIRONMENTAL RESISTANCE Little affected by contamination on lens Waterproof Even if the lens surface gets somewhat dirty from dust particles, there is very little change in the operation field, by usage adjustable range system. IP67 protection permits use in environments where water may splash. LIGHT CURTAINS / SAFETY COMPONENTS Note: Sensor may detect a water drop itself, if it is exposed to water splashes during operation. PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS ORDER GUIDE PARTICULAR USE SENSORS SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS Type Appearance Sensing range WIRE-SAVING SYSTEMS LASER MARKERS PLC HUMAN MACHINE INTERFACES With timer EQ-501T EQ-502 Selection Guide Amplifierseparated CX-400 Relay contact 1a - ON-delay / OFF-delay timer (Timer period: 0.1 to 5 sec.) - With timer .1 to 2.5 m 0 0.328 to 8.202 ft NPN open-collector transistor EQ-511T 12 to 24 V DC 10 % EQ-512 .1 to 1.0 m 0 0.328 to 3.281 ft ON-delay / OFF-delay timer (Timer period: 0.1 to 5 sec.) PNP open-collector transistor Equipped with 2 outputs - ON-delay / OFF-delay timer (Timer period: 0.1 to 5 sec.) EQ-512T OPTION Amplifier Built-in Power Supply Built-in ON-delay / OFF-delay timer (Timer period: 0.1 to 5 sec.) EQ-502T With timer UV CURING SYSTEMS 24 to 240 V AC 10 % or 12 to 240 V DC 10 % EQ-511 DC-voltage MACHINE VISION SYSTEMS Timer function - .1 to 1.0 m 0 0.328 to 3.281 ft ENERGY CONSUMPTION VISUALIZATION COMPONENTS FA COMPONENTS Output EQ-501 Multi-voltage STATIC ELECTRICITY PREVENTION DEVICES Supply voltage .1 to 2.5 m 0 0.328 to 8.202 ft With timer MEASUREMENT SENSORS Model No. Designation Model No. Description Sensor mounting bracket MS-EQ5-01 Foot / back angled mounting bracket Sensor mounting bracket * MS-EQ5-01 CY-100 EX-10 EX-20 EX-30 EX-40 CX-440 EQ-30 EQ-500 MQ-W RX-LS200 RX RT-610 Two M5 (length 30 mm 1.181 in) screws with washers and two nuts are attached. Adjustable Range Reflective Photoelectric Sensor EQ-500 SERIES SPECIFICATIONS FIBER SENSORS Multi-voltage Type Item Model No. With timer EQ-501 EQ-501T LASER SENSORS DC-voltage With timer EQ-502 EQ-502T With timer EQ-511 EQ-511T With timer EQ-512 EQ-512T Adjustable range (Note 2,3) 0.2 to 2.5 m 0.656 to 8.202 ft 0.2 to 1.0 m 0.656 to 3.281 ft 0.2 to 2.5 m 0.656 to 8.202 ft 0.2 to 1.0 m 0.656 to 3.281 ft Sensing range (at max. setting distance) (Note 3) 0.1 to 2.5 m 0.328 to 8.202 ft 0.1 to 1.0 m 0.328 to 3.281 ft 0.1 to 2.5 m 0.328 to 8.202 ft 0.1 to 1.0 m 0.328 to 3.281 ft Hysteresis (Note 3) Supply voltage Power / Current consumption Output 10 % or less of operation distance AC: 4 VA or less AC: 5 VA or less AC: 4 VA or less AC: 5 VA or less DC: 3 W or less DC: 4 W or less DC: 3 W or less DC: 4 W or less 45 mA or less PRESSURE / FLOW SENSORS Relay contact 1a * Switching capacity: 250 V AC 3 A (resistive load) 30 V DC 3 A (resistive load) * Electrical life: 100,000 or more switching operations (switching frequency 1,200 operations/hour) * Mechanical life: 50 million or more switching operations (switching frequency 18,000 operations/hour) NPN open-collector transistor * Maximum sink current: 100 mA * Applied voltage: 30 V DC or less (between output and 0 V) * Residual voltage: 1 V or less (at 100 mA sink current) 0.4 V or less (at 16 mA sink current) PNP open-collector transistor * Maximum source current: 100 mA * Applied voltage: 30 V DC or less (between output and +V) * Residual voltage: 1 V or less (at 100 mA source current) 0.4 V or less (at 16 mA source current) Switchable either Detection-ON or Detection-OFF - 20 ms or less (For EQ-50T depends on the setting timer period) 2 ms or less (For EQ-51T depends on the setting timer period) Orange LED (lights up when the output is ON) Green LED (lights up under stable operating condition) Distance adjuster 2-turn mechanical adjuster with indicator - Sensing mode - Incorporated with variable (0.1 to 5 sec.) ON-delay / OFF-delay timer - Automatic interference prevention function Environmental resistance Voltage withstandability Insulation resistance Vibration resistance Shock resistance Emitting element Cable length Weight Accessory SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS STATIC ELECTRICITY PREVENTION DEVICES HUMAN MACHINE INTERFACES ENERGY CONSUMPTION VISUALIZATION COMPONENTS FA COMPONENTS MACHINE VISION SYSTEMS -20 to +55 C -4 to +131 F (No dew condensation or icing allowed), Storage: -30 to +70 C -22 to +158 F 35 to 85 % RH, Storage: 35 to 85 % RH UV CURING SYSTEMS Incandescent light: 3,000 x at the light-receiving face 2,000 V AC for one min. among supply terminals, non-supply metal parts and relay contact output terminals, 1,000 V AC for one min. between relay contacts 1,000 V AC for one min. between all supply terminals connected together and enclosure 100 M, or more, with 500 V DC megger among supply terminals, non-supply metal parts and relay contact output terminals as well as between relay contacts 20 M, or more, with 250 V DC megger between all supply terminals connected together and enclosure Selection Guide Amplifier Built-in 10 to 55 Hz frequency, 1.5 mm 0.059 in amplitude in X, Y and Z directions for two hours each Power Supply Built-in 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions for three times each Amplifierseparated Infrared LED (Peak emission wavelength: 855 nm 0.034 mil, modulated) CX-400 2-segment photodiode Enclosure: ABS, Front cover: Polycarbonate, Display cover: Polycarbonate Connection method Cable - Incorporated with variable (0.1 to 5 sec.) ON-delay / OFF-delay timer IP67 (IEC) Receiving element Material SENSOR OPTIONS PLC Incorporated (Note 4) Protection Ambient illuminance - Incorporated with variable (0.1 to 5 sec.) ON-delay / OFF-delay timer PARTICULAR USE SENSORS LASER MARKERS Switchable either BGS or FGS function Incorporated with variable (0.1 to 5 sec.) ON-delay / OFF-delay timer INDUCTIVE PROXIMITY SENSORS MEASUREMENT SENSORS Incorporated Stability indicator Ambient humidity AREA SENSORS LIGHT CURTAINS / SAFETY COMPONENTS Operation indicator Ambient temperature MICRO PHOTOELECTRIC SENSORS 12 to 24 V DC 10 % Ripple P-P 10 % or less Short-circuit protection Timer function PHOTOELECTRIC SENSORS 24 to 240 V AC 10 % or 12 to 240 V DC 10 % Ripple P-P 10 % or less Output operation Response time 366 EX-10 Screw-on terminal connection Suitable for round cable o9 to o11 mm o0.354 to o0.433 in Total length up to 100 m 328.084 ft is possible with 0.3 mm2, or more, cabtyre cable. Net weight: 100 g approx. CY-100 Net weight: 85 g approx. Adjusting screwdriver: 1 pc. Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 C +73.4 F. 2) The adjustable range stands for the maximum sensing range which can be set with the distance adjuster. The sensor can also detect an object 0.1 m 0.328 ft, or more, away. 3) The adjustable range, sensing range and hysteresis are specified for white non-glossy paper (200 x 200 mm 7.874 x 7.874 in) as the object. 4) Note that the detection may be unstable depending on the mounting conditions or the sensing object. In the state that this product is mounted, be sure to check the operation with the actual sensing object. Refer to "Automatic interference function (p.368)" of "PRECAUTIONS FOR PROPER USE" for details. EX-20 EX-30 EX-40 CX-440 EQ-30 EQ-500 MQ-W RX-LS200 RX RT-610 367 Adjustable Range Reflective Photoelectric Sensor I/O CIRCUIT AND WIRING DIAGRAMS FIBER SENSORS I/O circuit diagram Terminal No. MICRO PHOTOELECTRIC SENSORS 1 LIGHT CURTAINS / SAFETY COMPONENTS 2 3 I/O circuit diagram D +V 100 mA max. 4 3 Tr1 LASER MARKERS ZD1 Load Output (PNP) Load Output (NPN) + - 12 to 24 V DC 10 % 1 2 3 4 100 mA max. 2 0V Internal circuit PLC Users' circuit Symbols ... D: Reverse supply polarity protection diode ZD1, ZD2: Surge absorption zener diode Tr1: NPN output transistor Tr2: PNP output transistor HUMAN MACHINE INTERFACES ENERGY CONSUMPTION VISUALIZATION COMPONENTS SENSING CHARACTERISTICS (TYPICAL) FA COMPONENTS EQ-501(T)EQ-511(T) Setting distance L (m ft) 3 9.843 200 x 200 mm 7.874 x 7.874 in Non-glossy paper 0.5 1.640 L 0 20 0.787 CX-400 2 6.562 1 3.281 Sensor 10 0 10 20 0.394 0.394 0.787 Center Left Right Operating point (mm in) 0 20 0.787 L 200 x 200 mm 7.874 x 7.874 in Non-glossy paper Sensor 10 0 10 20 0.394 0.394 0.787 Center Left Right Operating point (mm in) 2.5 8.202 1 3.281 0 CY-100 EX-20 Correlation between color (200 x 200 mm 7.874 x 7.874 in non-glossy paper) and sensing range EX-30 Blue Gray (Lightness: 8) Gray (Lightness: 5) RT-610 0 Green RX Red RX-LS200 1 3.281 Brown MQ-W Yellow EQ-500 Orange EQ-30 2.5 8.202 White CX-440 These bars indicate the sensing range with the respective colors when the distance adjuster is set to a sensing range of 2.5 m 8.202 ft / 1 m 3.281 ft long, respectively, with white non-glossy paper. The sensing range also varies depending on material. Sensing range L (m ft) EX-40 2.5 m * * * 8.202 ft 1m * * * 3.281 ft Correlation between sensing object size and sensing range Emitted beam 2.5 8.202 Distance L (m ft) EX-10 2 6.562 Setting distance: 2.5 m 8.202 ft o70 mm o2.756 in 2.5 8.202 o56 mm o2.205 in 1.5 4.921 o42 mm o1.654 in 1 3.281 o26 mm o1.024 in 0.5 1.640 o20 mm o0.787 in 0 These bars indicate the sensing range with the respective objects when the 2.5 m * * *8.202 ft distance adjuster is set to a sensing range 1m * * *3.281 ft of 2.5 m 8.202 ft / 1 m 3.281 ft long, respectively, with white non-glossy paper. Black rubber Gray non-glossy paper Lightness: 5 Plywood White nonglossy paper Cardboard 4 13.123 Gray non-glossy paper Lightness: 5 Sensing range L (m ft) White nonglossy paper Correlation between material (200 x 200 mm 7.874 x 7.874 in) and sensing range * Setting distance: 2.5 m 8.202 ft Gray non-grossy paper (Lightness: 5) * Setting distance: 1 m 3.281 ft White nonglossy paper Sensing fields 1 3.281 Amplifierseparated 1 ZD2 Tr2 Sensor circuit STATIC ELECTRICITY PREVENTION DEVICES Power Supply Built-in Terminal arrangement diagram Terminal No. MEASUREMENT SENSORS Amplifier Built-in 4 EQ-511(T)EQ-512(T) WIRE-SAVING SYSTEMS Selection Guide 3 Internal circuit SIMPLE WIRE-SAVING UNITS UV CURING SYSTEMS 2 Relay contact output (1a) 4 INDUCTIVE PROXIMITY SENSORS MACHINE VISION SYSTEMS 1 Output relay PRESSURE / FLOW SENSORS SENSOR OPTIONS Supply voltage 24 to 240 V AC 10 % or 12 to 240 V DC 10 % Multi-voltage circuit Sensor circuit AREA SENSORS PARTICULAR USE SENSORS Terminal arrangement diagram Sensing range L (m ft) PHOTOELECTRIC SENSORS EQ-501(T)EQ-502(T) Setting distance L (m ft) LASER SENSORS EQ-500 SERIES 2 6.562 1 3.281 White non-glossy paper L Sensor 0 50 100 150 1.969 3.937 5.906 White non-glossy paper side length a (mm in) This curve shows the characteristics with the maximum sensing range set to 2.5 m 8.202 ft, with white non-glossy paper (200 x 200 mm 7.874 x 7.874 in). 200 7.874 Adjustable Range Reflective Photoelectric Sensor EQ-500 SERIES 368 SENSING CHARACTERISTICS (TYPICAL) FIBER SENSORS EQ-502 (T)EQ-512 (T) LASER SENSORS Sensor 10 0 10 20 0.394 0.394 0.787 Center Left Right Operating point (mm in) L 0 20 0.787 Blue Gray (Lightness: 8) Gray (Lightness: 5) Green Red Brown Orange White Yellow 1m * * *3.281 ft 0 Emitted beam Correlation between sensing object size and sensing range o26 mm o1.024 in 1 3.281 o20 mm o0.787 in 0.5 1.640 1 3.281 0.5 1.640 0 0.5 m * * *1.640 ft PRECAUTIONS FOR PROPER USE * Never use this product as a sensing device for personnel protection. * In case of using sensing devices for personnel protection, use products which meet laws and standards, such as OSHA, ANSI or IEC etc., for personnel protection applicable in each region or country. Mounting M5 nut M5 (length 30 mm 1.181 in) screw with washers * The tightening torque should be 0.8 N*m or less. * Care must be taken regarding the sensor mounting direction with respect to the object's direction of movement. Correct Sensor mounting blacket MS-EQ5-01 (Optional) Correct Incorrect White nonglossy paper This curve shows the characteristics with the maximum sensing range set to 1 m 3.281 ft, with white non-glossy paper (200 x 200 mm 7.874 x 7.874 in). L 50 100 150 1.969 3.937 5.906 White non-glossy paper side length a (mm in) 200 7.874 * When a specular body is present below the sensor, use the sensor by tilting it slightly upwards to avoid faulty operation. Incorrect Correct Specular face Tilt * This product is not easily affected by the reflected light intensity since this sensor is the adjustable range reflective type. When the reflected light intensity is remarkably low, the sensing range may be affected. In that case, mount the sensor, while checking light-up of the stable indicator (green). * The mounting screws of the terminal cover and display cover should certainly be tightened to maintain water-resistance; the tightening torque of the screws should be 0.3 to 0.5 N*m. Automatic interference prevention function Sensing object Sensing object Sensing object * W hen detecting a specular object (aluminum or copper foil, etc.) or an object having a glossy surface or coating, please note that there are cases when the object may not be detected due to a change in angle, wrinkles on the object surface, etc. * If a specular body is present in the background, faulty operation may be caused due to a small change in the angle of the background body. In that case, install the sensor at an inclination and confirm the operation with the actual sensing object. 0 1 3.281 Interference prevented area L mm in or more L mm in or more MEASUREMENT SENSORS STATIC ELECTRICITY PREVENTION DEVICES LASER MARKERS HUMAN MACHINE INTERFACES ENERGY CONSUMPTION VISUALIZATION COMPONENTS FA COMPONENTS L mm in or more 0 UV CURING SYSTEMS Selection Guide Amplifier Built-in Power Supply Built-in Amplifierseparated CY-100 EX-10 EX-20 EX-30 2 6.562 L mm in or more 20 40 60 80 0.787 1.575 2.362 3.15 Mounting interval L (mm in) SENSOR OPTIONS CX-400 3 9.843 Setting distance (m ft) Setting distance (m ft) 3 9.843 1 3.281 PARTICULAR USE SENSORS MACHINE VISION SYSTEMS Specular face * When the sensors are mounted closely, use them in the interference prevented area, as shown below. Do not make the sensor detect an object in this direction because it may cause unstable operation. INDUCTIVE PROXIMITY SENSORS PLC Refer to p.1458~ for general precautions. 2 6.562 PRESSURE / FLOW SENSORS WIRE-SAVING SYSTEMS Sensor 0 LIGHT CURTAINS / SAFETY COMPONENTS SIMPLE WIRE-SAVING UNITS Setting distance: 1 m 3.281 ft Distance L (m ft) Sensing range L (m ft) 0.5 1.640 10 0 10 20 0.394 0.394 0.787 Center Left Right Operating point (mm in) These bars indicate the sensing range with the respective colors when the distance adjuster is set to a sensing range of 1 m 3.281 ft / 0.5 m 1.640 ft long, respectively, with white non-glossy paper. The sensing range also varies depending on material. 1 3.281 0.5 1.640 Sensor Correlation between color (200 x 200 mm 7.874 x 7.874 in non-glossy paper) and sensing range These bars indicate the sensing range with the respective objects 1m * * *3.281 ft when the distance adjuster is set to a 0.5 m sensing range of 1 m * * *1.640 ft 3.281 ft / 0.5 m 1.640 ft long, respectively, with white non-glossy paper. Black rubber 0 20 0.787 AREA SENSORS Plywood L 0.2 0.656 200 x 200 mm 7.874 x 7.874 in Non-glossy paper 0.5 1.640 1 3.281 Sensing range L (m ft) 200 x 200 mm 7.874 x 7.874 in Non-glossy paper PHOTOELECTRIC SENSORS MICRO PHOTOELECTRIC SENSORS Cardboard 1 3.281 0.6 1.969 0.4 1.312 Gray non-glossy paper Lightness: 5 Gray non-grossy paper (Lightness: 5) White nonglossy paper Gray non-glossy paper Lightness: 5 Correlation between material (200 x 200 mm 7.874 x 7.874 in) and sensing range Sensing range L (m ft) White nonglossy paper Setting distance L (m ft) Setting distance L (m ft) 0.8 2.625 * Setting distance: 1 m 3.281 ft White nonglossy paper Sensing fields * Setting distance: 0.5 m 1.640 ft EX-40 Interference prevented area 50 100 150 200 250 1.969 3.937 5.906 7.874 9.843 Mounting interval L (mm in) * Note that the detection may be unstable depending on the mounting conditions or the sensing object to be used. In the state that this product is mounted, be sure to check the operation with the actual sensing object to be used. CX-440 EQ-30 EQ-500 MQ-W RX-LS200 RX RT-610 369 FIBER SENSORS LASER SENSORS PHOTOELECTRIC SENSORS MICRO PHOTOELECTRIC SENSORS AREA SENSORS LIGHT CURTAINS / SAFETY COMPONENTS PRESSURE / FLOW SENSORS Adjustable Range Reflective Photoelectric Sensor EQ-500 SERIES PRECAUTIONS FOR PROPER USE Refer to p.1458~ for general precautions. Wiring Part description * Check all wiring before applying power since incorrect wiring may damage the internal circuit. Also, carefully tighten the terminal screws so that the wires of adjacent terminals do not touch. * The mounting hole for the terminal cover fixing screws inclines 70 degrees to the terminal cover, as shown in the figure below. To avoid damaging this product or screw, take care when tightening or loosening a screw. Screw for terminal cover fixing INDUCTIVE PROXIMITY SENSORS MEASUREMENT SENSORS STATIC ELECTRICITY PREVENTION DEVICES LASER MARKERS PLC * To maintain water-resistance, the cable should have an outer diameter between o9 to o11 mm o0.354 to o0.433 in with a smooth covering material that allows the attached conduit connector to be securely tightened; the tightening torque of the screw should be of 1.5 to 2.0 N*m. * If an external surge voltage exceeding 4 kV is impressed (DC-voltage type: 1 kV), the internal circuit will be damaged, and a surge suppressing element should be used. * Prepare the cable end as shown below. Conduit connector construction and cabling 37 mm 1.457 in HUMAN MACHINE INTERFACES MACHINE VISION SYSTEMS UV CURING SYSTEMS Amplifier Built-in Operation mode switch Detection-OFF mode is obtained when the switch is turned fully counterclockwise (D side). Note: T urn the operation mode switch gradually and lightly with the attached screwdriver. Turning with excessive strength will cause damage to the adjuster. L-ON / D-ON mode BGS / FGS mode Timer mode Not used Output Gland packing (Note) 25 mm 0.984 in Gland Note: When assembling the conduit connector, pay attention to the direction of the gland packing. Furthermore, in order to maintain water-resistance, fit the gland packing such that the seating surface of the gland packing contacts the packing holder part of the terminal cover evenly. Dimensions of the suitable crimp terminals Round type Description Detection-ON mode is obtained when the switch is turned fully clockwise (L side). Conduit connector Power Supply Built-in (Unit: mm in) EX-20 EX-30 * DC-voltage type sensor incorporates BGS / FGS function. Select either the BGS or FGS function depending on the positions of the background and sensing object. * BGS / FGS function is set with the operation mode switch. * FGS function is used when the sensing object contacts the background (conveyor, etc). * Depends on a selection of either BGS or FGS function, the output operation changes as follows. Y-shaped type o 3.6 o 0.142 or more 7.5 0.295 or less 22 0.866 or less 10 0.394 or less 3.6 0.142 or more 7 0.276 or less 17 0.669 or less (After crimping) 7.5 0.295 or less Setting distance 22 0.866 or less 10 0.394 or less Non-detectable area 7 0.276 or less 17 0.669 or less (After crimping) L-ON BGS D-ON EX-40 CX-440 EQ-30 EQ-500 MQ-W RX-LS200 RX RT-610 D FGS Timer ON N.C. Detectable range CY-100 EX-10 L BGS OFF N.C. BGS / FGS function (DC-voltage type only) Amplifierseparated CX-400 Operation mode switch (Note 1) DC-voltage type * The size of conduit is M20 x 1.5 mm 0.787 in. * If pressure terminals are to be used, affix the connected pressure terminals to a terminal (M3.5 screw). Selection Guide ON-delay timer adjuster (Note 2) Notes: 1) T he operation mode switch of the DC-voltage type is the DIP switch. Refer to `DC-voltage type' of `Operation mode switch' for details. 2) Incorporated on EQ-5T only. Power supply ENERGY CONSUMPTION VISUALIZATION COMPONENTS FA COMPONENTS Adjuster indicator Operation indicator (Orange) Multi-voltage type (L-ON / D-ON mode only) Screwdriver SENSOR OPTIONS WIRE-SAVING SYSTEMS OFF-delay timer adjuster (Note 2) Operation mode switch PARTICULAR USE SENSORS SIMPLE WIRE-SAVING UNITS Stability indicator (Green) Distance adjuster (2-turn) Note: Use crimp terminals with insulating sleeves. Recommended crimp terminal: Nominal size 1.25 x 3.5 0.049 x 0.138. * The tightening torque for the terminal screws should be 0.3 to 0.5 N*m. L-ON FGS D-ON ON OFF ON OFF ON OFF ON OFF Adjustable Range Reflective Photoelectric Sensor PRECAUTIONS FOR PROPER USE Timer function (EQ-5T only) EQ-500 SERIES 370 Refer to p.1458~ for general precautions. LASER SENSORS Stability indicator * EQ-5T incorporates an OFF-delay timer, which is useful when the response of the connected device is slow, etc., and an ON-delay timer, which is useful for detecting objects that move slowly, for example. * The OFF-delay and ON-delay timers can be used simultaneously. * For DC-voltage type, set the DIP switch for the timer mode to `Timer ON' side. * Since the EQ-500 series uses a 2-segment photodiode as its receiving element, and sensing is done based on the difference in the incident beam angle of the reflected beam from the sensing object, the output and the operation indicator (orange) operate according to the object distance. Furthermore, the stability indicator (green) shows the margin of the setting distance. PHOTOELECTRIC SENSORS MICRO PHOTOELECTRIC SENSORS AREA SENSORS LIGHT CURTAINS / SAFETY COMPONENTS PRESSURE / FLOW SENSORS Time chart Operation FIBER SENSORS Sensing condition Setting distance Detection Nondetection ON Detection normal operation OFF Detection ON-delay Sensing object ON (Lights up) Output (Operation indicator) (In case of Detection-ON) OFF (Lights off) ON T T T T Stable operating Lights up condition Lights off Unstable operating condition Stability indicator OFF Detection OFF-delay INDUCTIVE PROXIMITY SENSORS OFF WIRE-SAVING SYSTEMS ON Detection ON / OFF-delay T T OFF ON Non-detection normal operation OFF ON Non-detection ON-delay T T T OFF ON Non-detection OFF-delay T Non-detection ON / OFF-delay T MEASUREMENT SENSORS Others * Do not use during the initial transient time (50 ms) after the power supply is switched on. * Its distance adjuster is mechanically operated. Do not drop; avoid other shocks. OFF ENERGY CONSUMPTION VISUALIZATION COMPONENTS Timer period: T = 0.1 to 5 sec. (variable) The CAD data in the dimensions can be downloaded from our website. EQ-501(T)EQ-502(T)EQ-511(T)EQ-512(T) Sensor Assembly dimensions with sensor mounting bracket MS-EQ5-01 (Optional) (Foot angled mounting) Stability indicator (Green) Adjuster indicator Center of beamemitting (Center of sensing) 2 0.079 MACHINE VISION SYSTEMS UV CURING SYSTEMS OFF-delay timer adjuster (Note 2) 29 1.142 ON-delay timer adjuster (Note 2) 6.5 0.256 Operation indicator (Orange) 26 1.024 FA COMPONENTS Operation mode switch (Note 1) Distance adjuster (2-turn) Beamreceiving part LASER MARKERS HUMAN MACHINE INTERFACES ON DIMENSIONS (Unit: mm in) STATIC ELECTRICITY PREVENTION DEVICES PLC OFF T SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS Stable operating condition ON PARTICULAR USE SENSORS (30.5) (1.201) o6.5 o0.256 3-M5 nut seats (on both sides) 68 2.677 (10) (0.394) 3-o5.1 o0.201 mounting holes 4 0.157 6.5 0.256 17.5 0.689 58 (10) 2.283 (0.394) 2-M5 (length 30 1.181) screws Selection Guide Amplifier Built-in Power Supply Built-in Amplifierseparated CX-400 CY-100 Center of beamemitting (Center of sensing) 68 58 2.677 2.283 EX-10 58 2.283 88 3.465 22 0.866 5 0.197 5 0.197 30 1.181 58 2.283 Notes: 1) The operation mode switch of the DC-voltage type is the DIP switch. 2) For EQ-5T only. 37 1.457 18 0.709 26 1.024 29 1.142 5 0.197 58 2.283 78 3.071 t2 t 0.079 EX-20 EX-30 EX-40 CX-440 EQ-30 EQ-500 Material: Cold rolled carbon steel (SPCC) MQ-W Two M5 (length 30 mm 1.181 in) screws with washers and two nuts are attached. RX-LS200 RX RT-610