ON Semiconductor PNP 2N6052* Darlington Complementary Silicon Power Transistors NPN . . . designed for general-purpose amplifier and low frequency switching applications. 2N6058 2N6059* * High DC Current Gain -- * hFE = 3500 (Typ) @ IC = 5.0 Adc Collector-Emitter Sustaining Voltage -- @ 100 mA VCEO(sus) = 80 Vdc (Min) -- 2N6058 100 Vdc (Min) -- 2N6052, 2N6059 Monolithic Construction with Built-In Base-Emitter Shunt Resistors *ON Semiconductor Preferred Device IIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIII IIII IIII IIII III IIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIII IIII IIII IIII III IIIIIIIIIIII IIII IIII IIII III IIIIIIIIIIII IIII IIII IIII III IIIIIIIIIIII IIII IIIIIII III IIII IIII IIIIIIIIIIII IIII IIIIIII III IIIIIIIIIIII IIII IIIIIII III IIIIIIIIIIII IIII IIIIIII III IIIIIIIIIIII IIII IIIIIII III IIIIIIIIIIII IIII IIIIIII III IIIIIIIIIIII IIII IIIIIII III IIIIIIIIIIII IIII IIIIIII III IIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIII IIII IIIIIII III IIIIIIIIIIII IIIII IIIIII III IIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIII IIIII IIIIII III IIIIIIIIIIII IIIII IIIIII III * DARLINGTON 12 AMPERE COMPLEMENTARY SILICON POWER TRANSISTORS 80-100 VOLTS 150 WATTS MAXIMUM RATINGS (1) Symbol 2N6058 2N6052 2N6059 Unit VCEO 80 100 Vdc Collector-Base Voltage VCB 80 100 Vdc Emitter-Base voltage VEB 5.0 Vdc Collector Current -- Continuous Peak IC 12 20 Adc Base Current IB 0.2 Adc Total Device Dissipation @TC = 25C Derate above 25C PD 150 Watts 0.857 W/C -65 to +200C C Rating Collector-Emitter Voltage Operating and Storage Junction Temperature Range TJ, Tstg CASE 1-07 TO-204AA (TO-3) THERMAL CHARACTERISTICS Characteristic Thermal Resistance, Junction to Case Symbol Rating Unit RJC 1.17 C/W (1) Indicates JEDEC Registered Data. PD, POWER DISSIPATION (WATTS) 160 140 120 100 80 60 40 20 0 0 25 50 75 100 125 150 TC, CASE TEMPERATURE (C) 175 200 Figure 1. Power Derating Preferred devices are ON Semiconductor recommended choices for future use and best overall value. Semiconductor Components Industries, LLC, 2001 March, 2001 - Rev. 2 1 Publication Order Number: 2N6052/D 2N6052 IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III *ELECTRICAL CHARACTERISTICS (TC = 25C unless otherwise noted) Characteristic Symbol Min Max 80 100 -- -- -- -- 1.0 1.0 -- 0.5 5.0 -- 2.0 750 100 18,000 -- -- -- 2.0 3.0 Unit OFF CHARACTERISTICS Collector-Emitter Sustaining Voltage (2) (IC = 100 mAdc, IB = 0) VCEO(sus) 2N6058 2N6052, 2N6059 Collector Cutoff Current (VCE = 40 Vdc, IB = 0) (VCE = 50 Vdc, IB = 0) Vdc ICEO mAdc 2N6058 2N6052, 2N6059 Collector Cutoff Current (VCE = Rated VCEO, VBE(off) = 1.5 Vdc) (VCE = Rated VCEO, VBE(off) = 1.5 Vdc, TC = 150C) ICEX Emitter Cutoff Current (VBE = 5.0 Vdc, IC = 0) IEBO mAdc mAdc ON CHARACTERISTICS (2) DC Current Gain (IC = 6.0 Adc, VCE = 3.0 Vdc) (IC = 12 Adc, VCE = 3.0 Vdc) hFE -- Collector-Emitter Saturation Voltage (IC = 6.0 Adc, IB = 24 mAdc) (IC = 12 Adc, IB = 120 mAdc) VCE(sat) Vdc Base-Emitter Saturation Voltage (IC = 12 Adc, IB = 120 mAdc) VBE(sat) -- 4.0 Vdc Base-Emitter On Voltage (IC = 6.0 Adc, VCE = 3.0 Vdc) VBE(on) -- 2.8 Vdc |hfe| 4.0 -- MHz Cob -- -- 500 300 pF hfe 300 -- -- DYNAMIC CHARACTERISTICS Magnitude of Common Emitter Small-Signal Short Circuit Forward Current Transfer Ratio (IC = 5.0 Adc, VCE = 3.0 Vdc, f = 1.0 MHz) Output Capacitance (VCB = 10 Vdc, IE = 0, f = 0.1 MHz) 2N6052 2N6058/2N6059 Small-Signal Current Gain (IC = 5.0 Adc, VCE = 3.0 Vdc, f = 1.0 kHz) *Indicates JEDEC Registered Data. (2) Pulse test: Pulse Width = 300 s, Duty Cycle = 2.0%. RC ts SCOPE 51 V1 approx -8.0 V D1 5.0 k t, TIME (s) RB 0 50 +4.0 V 25 s tr, tf 10 ns DUTY CYCLE = 1.0% 2N6052 2N6059 5.0 TUT V2 approx +8.0 V 10 VCC -30 V RB & RC VARIED TO OBTAIN DESIRED CURRENT LEVELS D1 MUST BE FAST RECOVERY TYPE, eg: 1N5825 USED ABOVE IB 100 mA MSD6100 USED BELOW IB 100 mA 2.0 tf 1.0 tr 0.5 td @ VBE(off) = 0 for td and tr, D1 is disconnected and V2 = 0 0.2 0.1 0.2 For NPN test circuit reverse diode and voltage polarities. Figure 2. Switching Times Test Circuit 0.5 1.0 3.0 5.0 IC, COLLECTOR CURRENT (AMP) Figure 3. Switching Times http://onsemi.com 2 VCC = 30 V IC/IB = 250 IB1 = IB2 TJ = 25C 10 20 r(t), EFFECTIVE TRANSIENT THERMAL RESISTANCE (NORMALIZED) 2N6052 1.0 0.7 0.5 D = 0.5 0.3 0.2 0.2 0.1 0.1 0.07 0.05 P(pk) RJC(t) = r(t) RJC RJC = 1.17C/W MAX D CURVES APPLY FOR POWER PULSE TRAIN SHOWN t1 READ TIME AT t1 t2 TJ(pk) - TC = P(pk) JC(t) DUTY CYCLE, D = t1/t2 0.05 0.02 0.03 0.02 SINGLE PULSE 0.01 0.01 0.02 0.01 0.03 0.05 0.1 0.2 0.3 0.5 1.0 2.0 3.0 5.0 t, TIME (ms) 10 20 30 50 100 200 300 500 1000 Figure 4. Thermal Response ACTIVE-REGION SAFE OPERATING AREA 50 0.1 ms 20 IC, COLLECTOR CURRENT (AMP) IC, COLLECTOR CURRENT (AMP) 50 10 5.0 0.5 ms 2.0 1.0 0.5 0.2 0.1 0.05 10 1.0 ms 5.0 ms TJ = 200C SECOND BREAKDOWN LIM ITED BONDING WIRE LIMITED THERMAL LIMITATION @TC = 25C (SINGLE PULSE) d c 50 70 20 30 VCE, COLLECTOR-EMITTER VOLTAGE (VOLTS) 10 0.5 ms 5.0 2.0 1.0 ms 5.0 ms 1.0 TJ = 200C 0.5 SECOND BREAKDOWN LIMITED 0.2 BONDING WIRE LIMITED 0.1 THERMAL LIMITATION @TC = 25C (SINGLE PULSE) 0.05 100 0.1 ms 20 10 20 30 d c 50 70 100 VCE, COLLECTOR-EMITTER VOLTAGE (VOLTS) Figure 5. 2N6058 Figure 6. 2N6052, 2N6059 There are two limitations on the power handling ability of a transistor: average junction temperature and second breakdown. Safe operating area curves indicate IC - VCE limits of the transistor that must be observed for reliable operation; i.e., the transistor must not be subjected to greater dissipation than the curves indicate. The data of Figures 5, 6, and 7 is based on TJ(pk) = 200C; TC is variable depending on conditions. Second breakdown pulse limits are valid for duty cycles to 10% provided TJ(pk) 200C; TJ(pk) may be calculated from the data in Figure 4. At high case temperatures, thermal limitations will reduce the power that can be handled to values less than the limitations imposed by second breakdown. http://onsemi.com 3 500 3000 2000 TC = 25C VCE = 3.0 V IC = 5.0 A 1000 TJ = 25C 300 C, CAPACITANCE (pF) hfe, SMALL-SIGNAL CURRENT GAIN 2N6052 500 200 100 2N6052 2N6058/2N6059 50 30 1.0 2.0 5.0 10 20 50 100 f, FREQUENCY (kHz) Cib 200 Cob 100 2N6052 2N6058/2N6059 70 200 50 0.1 500 1000 0.2 0.5 1.0 2.0 5.0 10 20 VR, REVERSE VOLTAGE (VOLTS) Figure 8. Capacitance Figure 7. Small-Signal Current Gain http://onsemi.com 4 50 100 2N6052 PNP 2N6052 NPN 2N6058, 2N6059 40,000 20,000 TJ = 150C 10,000 5000 3000 25C 2000 1000 VCE = 3.0 V TJ = 150C 20,000 hFE , DC CURRENT GAIN hFE , DC CURRENT GAIN 10,000 VCE = 3.0 V -55C 500 300 200 0.2 0.3 0.5 5.0 1.0 2.0 3.0 IC, COLLECTOR CURRENT (AMP) 6,000 4,000 2,000 1,000 -55C 600 400 0.2 0.3 20 10 25C 0.5 1.0 2.0 3.0 5.0 IC, COLLECTOR CURRENT (AMP) 10 20 3.0 VCE , COLLECTOR-EMITTER VOLTAGE (VOLTS) VCE , COLLECTOR-EMITTER VOLTAGE (VOLTS) Figure 9. DC Current Gain TJ = 25C 2.6 IC = 3.0 A 6.0 A 9.0 A 12 A 2.2 1.8 1.4 1.0 0.5 1.0 20 30 5.0 2.0 3.0 10 IB, BASE CURRENT (mA) 50 3.0 2.6 TJ = 25C IC = 3.0 A 6.0 A 9.0 A 12 A 2.0 3.0 5.0 10 IB, BASE CURRENT (mA) 20 30 2.2 1.8 1.4 1.0 0.5 1.0 50 Figure 10. Collector Saturation Region 3.0 3.0 TJ = 25C TJ = 25C 2.5 V, VOLTAGE (VOLTS) V, VOLTAGE (VOLTS) 2.5 2.0 1.5 VBE(sat) @ IC/IB = 250 1.0 0.5 0.2 0.3 VBE @ VCE = 3.0 V 1.0 1.5 VBE(sat) @ IC/IB = 250 VBE @ VCE = 3.0 V 1.0 VCE(sat) @ IC/IB = 250 VCE(sat) @ IC/IB = 250 0.5 2.0 2.0 3.0 5.0 10 0.5 0.2 0.3 20 0.5 1.0 2.0 3.0 5.0 IC, COLLECTOR CURRENT (AMP) IC, COLLECTOR CURRENT (AMP) Figure 11. "On" Voltages http://onsemi.com 5 10 20 2N6052 PACKAGE DIMENSIONS CASE 1-07 TO-204AA (TO-3) ISSUE Z A N C -T- E D SEATING PLANE K 2 PL 0.13 (0.005) U T Q M M Y M -Y- L V NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. ALL RULES AND NOTES ASSOCIATED WITH REFERENCED TO-204AA OUTLINE SHALL APPLY. 2 H G B M T Y 1 -Q- 0.13 (0.005) M DIM A B C D E G H K L N Q U V INCHES MIN MAX 1.550 REF --1.050 0.250 0.335 0.038 0.043 0.055 0.070 0.430 BSC 0.215 BSC 0.440 0.480 0.665 BSC --0.830 0.151 0.165 1.187 BSC 0.131 0.188 STYLE 1: PIN 1. BASE 2. EMITTER CASE: COLLECTOR http://onsemi.com 6 MILLIMETERS MIN MAX 39.37 REF --26.67 6.35 8.51 0.97 1.09 1.40 1.77 10.92 BSC 5.46 BSC 11.18 12.19 16.89 BSC --21.08 3.84 4.19 30.15 BSC 3.33 4.77 2N6052 Notes http://onsemi.com 7 2N6052 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. PUBLICATION ORDERING INFORMATION NORTH AMERICA Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: ONlit@hibbertco.com Fax Response Line: 303-675-2167 or 800-344-3810 Toll Free USA/Canada N. American Technical Support: 800-282-9855 Toll Free USA/Canada EUROPE: LDC for ON Semiconductor - European Support German Phone: (+1) 303-308-7140 (Mon-Fri 2:30pm to 7:00pm CET) Email: ONlit-german@hibbertco.com French Phone: (+1) 303-308-7141 (Mon-Fri 2:00pm to 7:00pm CET) Email: ONlit-french@hibbertco.com English Phone: (+1) 303-308-7142 (Mon-Fri 12:00pm to 5:00pm GMT) Email: ONlit@hibbertco.com CENTRAL/SOUTH AMERICA: Spanish Phone: 303-308-7143 (Mon-Fri 8:00am to 5:00pm MST) Email: ONlit-spanish@hibbertco.com Toll-Free from Mexico: Dial 01-800-288-2872 for Access - then Dial 866-297-9322 ASIA/PACIFIC: LDC for ON Semiconductor - Asia Support Phone: 1-303-675-2121 (Tue-Fri 9:00am to 1:00pm, Hong Kong Time) Toll Free from Hong Kong & Singapore: 001-800-4422-3781 Email: ONlit-asia@hibbertco.com JAPAN: ON Semiconductor, Japan Customer Focus Center 4-32-1 Nishi-Gotanda, Shinagawa-ku, Tokyo, Japan 141-0031 Phone: 81-3-5740-2700 Email: r14525@onsemi.com ON Semiconductor Website: http://onsemi.com EUROPEAN TOLL-FREE ACCESS*: 00-800-4422-3781 *Available from Germany, France, Italy, UK, Ireland For additional information, please contact your local Sales Representative. http://onsemi.com 8 2N6052/D