$ESIGNANDSPECIlCATIONSARESUBJECTTOCHANGEWITHOUTNOTICE!SKFACTORYFORTECHNICALSPECIlCATIONSBEFOREPURCHASEANDORUSE
7HENEVERADOUBTABOUTSAFETYARISESFROMTHISPRODUCTPLEASECONTACTUSIMMEDIATELYFORTECHNICALCONSULTATION
Tantalum Solid Electrolytic Capacitors/TE-L
-55 to +125°C
4 to 35 V .DC
6.8 to 330 µ F
±20 % (120Hz/+20°C)
Japan
Surface Mount Type
TE-L
Series:
■ Features
■ Specifications
Category temp. range
Rated W.V. Range
Nominal Cap. Range
Capacitance Tolerance
DC Leakage Current
Moisture Resistance
Endurance
Resistance to Soldering Heat
Dissipation Factor Please see the attached standard products list
The capacitor shall withstand dipping into solder for 5±1 seconds at +260 ±5°C
After 500 hours exposure at +40°C and 90 to 95 % R.H. without load, the capacitor shall
meet the following limits.
Capacitance change
D.F.
DC leakage current
After 2000 hours application of rated DC working voltage at +85°C or derated voltage at
+125°C, the capacitor shall meet the following limits.
Capacitance change
D.F.
DC leakage current
±10% of initial measured value
< initial specified value
< initial specified value
±10% of initial measured value
< initial specified value
<125 % of initial specified value
■ Marking ■ Dimensions in mm (not to scale)
Note : 1. ( )shows W.V. and capacitance code.
2. When selecting W.V. see the page 210.
3. Other rating upon request (voltage, capacitance, tolerance, size)
■ Case size
I0.01CV or 0.5 (µA) after 2 minutes application of rated working voltage at 20°C. (Whichever is the greater)
Low ESR
W2
P
(+)(-)
W2
L
H
w1
Szde code
C
D
P
6.0
7.3
3.2
4.3
2.2
2.4
2.5
2.8
1.3
1.3
EIA code
6032
7343
● Size C,D
Cap.(µF)
Polarity Bar(+side) W.V.(V)
(for 6.3W.V. abbreviated to 6 V)
Each case side has different configuration
of terminal.
L±0.2 W1±0.2 W2±0.1 H±0.2 P±0.3
SUPER LOW ESR TANTALUM
4(0G) 6.3(0J) 10(1A) 16(1C) 20(1D) 25(1E) 35(1V)
6.8 (685)
10 (106)
15 (156)
22 (226)
33 (336)
47 (476)
68 (686)
100 (107)
150 (157)
220 (227)
330 (337)
C
D
D
C
D
D
C
D
D
C
D
C
C
D
C
D
D
D
C
D
D
D
W.V(V.DC)
Cap.(µF)
<