Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ EB
– EE104 –
φD±0.5
φ5to φ8φ10<
φd±0.05
F±0.5
Sleeve
14 min.
3 min.
L✽
(φ8҂15 only L±1.5)✽L<16:L±1.0
L>20:L±2.0
Pressure relief
φ6.3<+
–
φD±0.5
■Features
● Endurance : +105 °C 5000 h to 10000 h
● Hight ripple hight frequency (Hight Voltage)
● RoHS directive compliant
Radial Lead Type
Series: EB Type: A
■Specifi cations
■Di men sions in mm (not to scale)
(mm)
Category Temp. Range –40 °C to +105 °C –25 °C to +105 °C
Rated W.V. Range 10 V.DC to 63 V.DC 160 V.DC to 450 V.DC
Nominal Cap. Range 0.47 µF to 3300 µF 10 µF to 330 µF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent I < 0.01 CV or 3 (µA)
After 2 minutes ap pli ca tion of rated working voltage at +20 °C (Whichever is greater)
tan δPlease see the attached standard products list
Endurance
After following life test with DC voltage and +105 °C±2 °C ripple current value applied
(The sum of DC and ripple peak voltage shall not exceed the rated working voltage), when
the capacitors are restord to 20 °C, the capacitors shall meet the limits specifi ed below.
(10 to 63 V.DC)
Duration : φ5҂
11 to φ8҂
11.5 : 5000 hours φ5҂
15 to φ6.3҂
15 : 7000 hours
φ8҂
15 to φ
12.5҂
25 : 10000 hours
Capacitance change ±30 % of initial measured value
tan δ< 300 % of initial specifi ed value
DC leakage current < initial specifi ed value
(160 to 450 V.DC)
Duration : 5000 hours
Capacitance change ±20 % of initial measured value
tan δ< 200 % of initial specifi ed value
DC leakage current < initial specifi ed value
Shelf Life After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
[mm]
Body Dia. φD56.3 8 10 12.5 16 18
Lead Dia. φd 0.5 0.5 0.6 0.6 0.6 0.8 0.8
Lead space F 2.0 2.5 3.5 5.0 5.0 7.5 7.5
■Frequency correction factor for ripple current
(10 ~ 63 V.DC)
Capacitance
(µF)
Frequency (Hz)
60 120 1 k 10 k 100 k
0.47 to 10 0.75 1.00 1.40 1.55 1.65
22 to 470 0.85 1.00 1.20 1.25 1.30
1000 to 3300 0.95 1.00 1.05 1.10 1.15
W. V.
(V. DC)
Frequency (Hz)
120 1 k
10 k to 30k 30 k to 100k
160 to 250 0.55 0.85 0.90 1.00
350 to 450 0.500.800.901.00
Sep. 201000
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ EB
– EE105 –
■Standard Prod ucts
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(120 Hz)
(+105 °C)
tan δ
(120 Hz)
(+20 °C)
Endur-
ance
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽B
Taping
✽H
(V) (µF) (mm) (mm)
(mA r.m.s.)
(hours) (mm) (mm) (mm) (mm) (pcs) (pcs)
10
100 5 15 1050.307000 0.5 2.0 5.0 2.5 EEUEB1A101( ) 200 2000
5 11 660.305000 0.5 2.0 5.0 2.5 EEUEB1A101S( ) 200 2000
220 6.3 15 152 0.30 7000 0.5 2.5 5.0 2.5 EEUEB1A221( ) 200 2000
6.3 11.2 100 0.30 5000 0.5 2.5 5.0 2.5 EEUEB1A221S( ) 200 2000
470 8 15 2780.3010000 0.6 3.5 5.0 EEUEB1A471( ) 200 1000
8 11.51800.305000 0.6 3.5 5.0 EEUEB1A471S( ) 200 1000
2200 12.5 20 540 0.32 10000 0.6 5.0 5.0 EEUEB1A222( ) 200 500
3300 12.5 25 802 0.34 10000 0.6 5.0 5.0 EEUEB1A332( ) 200 500
16 1000 10 20 430 0.25 10000 0.6 5.0 5.0 EEUEB1C102( ) 200 500
2200 12.5 25 706 0.27 10000 0.6 5.0 5.0 EEUEB1C222( ) 200 500
25
47 5 15 780.227000 0.5 2.0 5.0 2.5 EEUEB1E470( ) 200 2000
5 11 550.225000 0.5 2.0 5.0 2.5 EEUEB1E470S( ) 200 2000
100 6.3 15 135 0.22 7000 0.5 2.5 5.0 2.5 EEUEB1E101( ) 200 2000
6.3 11.2 95 0.22 5000 0.5 2.5 5.0 2.5 EEUEB1E101S( ) 200 2000
220 8 11.5 125 0.225000 0.6 3.5 5.0 EEUEB1E221S( ) 200 1000
330 8 15 2550.2210000 0.6 3.5 5.0 EEUEB1E331( ) 200 1000
470 10 16 3210.2210000 0.6 5.0 5.0 EEUEB1E471( ) 200 500
1000 12.5 20 498 0.22 10000 0.6 5.0 5.0 EEUEB1E102( ) 200 500
35
33 5 15 660.187000 0.5 2.0 5.0 2.5 EEUEB1V330( ) 200 2000
5 11 460.185000 0.5 2.0 5.0 2.5 EEUEB1V330S( ) 200 2000
220 8 15 1970.1810000 0.6 3.5 5.0 EEUEB1V221( ) 200 1000
330 10 16 2780.1810000 0.6 5.0 5.0 EEUEB1V331( ) 200 500
470 10 20 3490.1810000 0.6 5.0 5.0 EEUEB1V471( ) 200 500
1000 12.5 25 586 0.18 10000 0.6 5.0 5.0 EEUEB1V102( ) 200 500
50
0.47 5 11 4 0.15 5000 0.5 2.0 5.0 2.5 EEUEB1HR47S( ) 200 2000
1 5 11 8 0.155000 0.5 2.0 5.0 2.5 EEUEB1H1R0S( ) 200 2000
2.2 5 11 15 0.15 5000 0.5 2.0 5.0 2.5 EEUEB1H2R2S( ) 200 2000
3.3 5 11 18 0.15 5000 0.5 2.0 5.0 2.5 EEUEB1H3R3S( ) 200 2000
4.7 5 11 18 0.15 5000 0.5 2.0 5.0 2.5 EEUEB1H4R7S( ) 200 2000
10 5 11 27 0.15 5000 0.5 2.0 5.0 2.5 EEUEB1H100S( ) 200 2000
22 5 15 550.15 7000 0.5 2.0 5.0 2.5 EEUEB1H220( ) 200 2000
5 11 390.155000 0.5 2.0 5.0 2.5 EEUEB1H220S( ) 200 2000
47 6.3 15 87 0.15 7000 0.5 2.5 5.0 2.5 EEUEB1H470( ) 200 2000
6.3 11.2 61 0.15 5000 0.5 2.5 5.0 2.5 EEUEB1H470S( ) 200 2000
100 8 11.5 99 0.15 5000 0.6 3.5 5.0 EEUEB1H101S( ) 200 1000
220 10 16 2340.1510000 0.6 5.0 5.0 EEUEB1H221( ) 200 500
330 10 20 2930.1510000 0.6 5.0 5.0 EEUEB1H331( ) 200 500
470 12.5 20 3700.1510000 0.6 5.0 5.0 EEUEB1H471( ) 200 500
63
0.47 5 15 60.127000 0.5 2.0 5.0 2.5 EEUEB1JR47( ) 200 2000
5 11 4.50.125000 0.5 2.0 5.0 2.5 EEUEB1JR47S( ) 200 2000
1 5 15 120.127000 0.5 2.0 5.0 2.5 EEUEB1J1R0( ) 200 2000
5 11 90.125000 0.5 2.0 5.0 2.5 EEUEB1J1R0S( ) 200 2000
2.2 5 15 220.127000 0.5 2.0 5.0 2.5 EEUEB1J2R2( ) 200 2000
5 11 16.50.125000 0.5 2.0 5.0 2.5 EEUEB1J2R2S( ) 200 2000
3.3 5 15 300.127000 0.5 2.0 5.0 2.5 EEUEB1J3R3( ) 200 2000
5 11 200.125000 0.5 2.0 5.0 2.5 EEUEB1J3R3S( ) 200 2000
4.7 5 15 300.127000 0.5 2.0 5.0 2.5 EEUEB1J4R7( ) 200 2000
5 11 230.125000 0.5 2.0 5.0 2.5 EEUEB1J4R7S( ) 200 2000
10 5 15 460.127000 0.5 2.0 5.0 2.5 EEUEB1J100( ) 200 2000
5 11 300.125000 0.5 2.0 5.0 2.5 EEUEB1J100S( ) 200 2000
22 6.3 15 55 0.12 7000 0.5 2.5 5.0 2.5 EEUEB1J220( ) 200 2000
6.3 11.2 40 0.12 5000 0.5 2.5 5.0 2.5 EEUEB1J220S( ) 200 2000
33 6.3 15 71 0.12 7000 0.5 2.5 5.0 2.5 EEUEB1J330( ) 200 2000
6.3 11.2 50 0.12 5000 0.5 2.5 5.0 2.5 EEUEB1J330S( ) 200 2000
47 8 15 94 0.12 10000 0.6 3.5 5.0 EEUEB1J470( ) 200 1000
8 11.5 800.125000 0.6 3.5 5.0 EEUEB1J470S( ) 200 1000
100 8 15 1800.1210000 0.6 3.5 5.0 EEUEB1J101( ) 200 1000
220 10 20 2920.1210000 0.6 5.0 5.0 EEUEB1J221( ) 200 500
330 12.5 20 3810.1210000 0.6 5.0 5.0 EEUEB1J331( ) 200 500
470 12.5 25 4540.1210000 0.6 5.0 5.0 EEUEB1J471( ) 200 500
Endurance : 105 °C φ5҂11 to φ8҂11.5=5000 h, φ5×15 to φ6.3҂15=7000 h, φ8×15 to φ12.5҂25=10000 h
When requesting taped product, please put the letter "B" or "H" be tween the "( )". Lead wire pitch B=5 mm, 7.5 mm, H=2.5 mm.
The taping dimensions are explained on EE189 of our Catalog. Please use it as a reference guide.
Sep. 201000
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ EB
– EE106 –
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(100 kHz)
(+105 °C)
tan δ
(120 Hz)
(+20 °C)
Endur-
ance
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽B
(V) (µF) (mm) (mm)
(mA r.m.s.)
(hours) (mm)(mm)(mm) (pcs)(pcs)
160
22 10 20 470 0.155000 0.6 5.0 5.0 EEUEB2C220( ) 200 500
33 10 20 470 0.155000 0.6 5.0 5.0 EEUEB2C330( ) 200 500
47 12.5 20 600 0.15 5 000 0.6 5.0 5.0 EEUEB2C470( ) 200 500
68 12.5 25 750 0.155000 0.6 5.0 5.0 EEUEB2C680( ) 200 500
16 20 750 0.15 5000 0.8 7.5 7.5 EEUEB2C680S( ) 100 250
100 16 25 1060 0.15 5000 0.8 7.5 7.5 EEUEB2C101( ) 100 250
18 20 1060 0.15 5000 0.8 7.5 7.5 EEUEB2C101S( ) 100 250
150 16 31.5 1280 0.15 5000 0.8 7.5 – EEUEB2C151 100 –
18 25 1280 0.15 5000 0.8 7.5 7.5 EEUEB2C151S( ) 100 250
220 16 31.5 1280 0.15 5000 0.8 7.5 – EEUEB2C221 100 –
18 25 1280 0.15 5000 0.8 7.5 7.5 EEUEB2C221S( ) 100 250
330 18 31.5 1690 0.15 5000 0.8 7.5 – EEUEB2C331 50 –
200
22 10 20 470 0.155000 0.6 5.0 5.0 EEUEB2D220( ) 200 500
33 12.5 20 600 0.15 5000 0.6 5.0 5.0 EEUEB2D330( ) 200 500
47 12.5 20 600 0.15 5 000 0.6 5.0 5.0 EEUEB2D470( ) 200 500
68 12.5 25 750 0.155000 0.6 5.0 5.0 EEUEB2D680( ) 200 500
16 20 750 0.15 5000 0.8 7.5 7.5 EEUEB2D680S( ) 100 250
100 16 25 1060 0.15 5000 0.8 7.5 7.5 EEUEB2D101( ) 100 250
18 20 1060 0.15 5000 0.8 7.5 7.5 EEUEB2D101S( ) 100 250
150 16 31.5 1280 0.15 5000 0.8 7.5 – EEUEB2D151 100 –
18 25 1280 0.15 5000 0.8 7.5 7.5 EEUEB2D151S( ) 100 250
220 18 31.5 1690 0.15 5000 0.8 7.5 – EEUEB2D221 100 –
250
22 12.5 20 560 0.15 5 000 0.6 5.0 5.0 EEUEB2E220( ) 200 500
33 12.5 20 560 0.15 5 000 0.6 5.0 5.0 EEUEB2E330( ) 200 500
47 12.5 25 710 0.155000 0.6 5.0 5.0 EEUEB2E470( ) 200 500
16 20 710 0.15 5000 0.8 7.5 7.5 EEUEB2E470S( ) 100 250
68 16 25 990 0.15 5000 0.8 7.5 7.5 EEUEB2E680( ) 100 250
18 20 990 0.15 5000 0.8 7.5 7.5 EEUEB2E680S( ) 100 250
100 16 31.5 1200 0.15 5000 0.8 7.5 – EEUEB2E101 100 –
18 25 1200 0.15 5000 0.8 7.5 7.5 EEUEB2E101S( ) 100 250
150 18 31.5 1470 0.15 5000 0.8 7.5 – EEUEB2E151 50 –
350
10 10 20 270 0.20 5000 0.6 5.0 5.0 EEUEB2V100( ) 200 500
22 12.5 20 350 0.20 5000 0.6 5.0 5.0 EEUEB2V220( ) 200 500
33 16 20 480 0.205000 0.8 7.5 7.5 EEUEB2V330S( ) 100 250
47 16 25 640 0.20 5000 0.8 7.5 7.5 EEUEB2V470( ) 100 250
18 20 640 0.20 5000 0.8 7.5 7.5 EEUEB2V470S( ) 100 250
68 16 31.5 780 0.205000 0.8 7.5 – EEUEB2V680 100 –
18 25 780 0.20 5000 0.8 7.5 7.5 EEUEB2V680S( ) 100 250
100 18 31.5 970 0.20 5000 0.8 7.5 – EEUEB2V101 50 –
400
10 10 20 250 0.24 5000 0.6 5.0 5.0 EEUEB2G100( ) 200 500
22 12.5 25 410 0.245000 0.6 5.0 5.0 EEUEB2G220( ) 200 500
16 20 410 0.24 5000 0.8 7.5 7.5 EEUEB2G220S( ) 100 250
33 16 25 600 0.24 5000 0.8 7.5 7.5 EEUEB2G330( ) 100 250
18 20 600 0.24 5000 0.8 7.5 7.5 EEUEB2G330S( ) 100 250
47 16 31.5 730 0.245000 0.8 7.5 – EEUEB2G470 100 –
18 25 730 0.24 5000 0.8 7.5 7.5 EEUEB2G470S( ) 100 250
450
10 12.5 20 310 0.24 5000 0.6 5.0 5.0 EEUEB2W100( ) 200 500
22 16 25 560 0.24 5000 0.8 7.5 7.5 EEUEB2W220( ) 100 250
18 20 560 0.24 5000 0.8 7.5 7.5 EEUEB2W220S( ) 100 250
33 16 31.5 680 0.245000 0.8 7.5 – EEUEB2W330( ) 100 –
18 25 680 0.24 5000 0.8 7.5 7.5 EEUEB2W330S( ) 100 250
47 18 31.5 850 0.24 5000 0.8 7.5 – EEUEB2W470 50 –
■Standard Prod ucts
Endurance : 105 °C 5000 h
When requesting taped product, please put the letter "B" be tween the "( )". Lead wire pitch B=5 mm, 7.5 mm.
The taping dimensions are explained on EE189 of our Catalog. Please use it as a reference guide.
Dec. 201001
