VS-100F-5 - CUI, Inc. - Datasheet.Directory



•

VS-100F-5 Open Frame Power Supply

V-Infinity, LLC, 9615 SW Allen Blvd Suite 103, Beaverton, OR 97005 www.v-infinity.com 1-866-372-1258

DC output voltage 5V

Output V. tolerance ±2%

Output rated current 20A

Output current range 0-20A

Ripple & noise 100mVp-p

Line regulation ±0.5%

Load regulation ±1%

DC output power 100W

Efficiency 76%

DC voltage adj. ±10%

Input voltage range 88~132VAC/176~264VAC selected by manual switch, 47~63Hz; or 248~370VDC

AC current 2.4A/115V 1.2A/230V

Inrush current cold start 30A/115V 60A/230V

Leakage current <1mA/240AC

Overload protection 105%~150%, pulsing (hiccup mode), auto restart

Over voltage protection 115%~135%

Over temp. protection ---

Temperature coefficient ±0.03% / °C (0~50°C)

Set up, rise, hold up time 1s, 30ms, 15ms

Vibration 10~500Hz, 2G 10min./1 cycle (1 hour each axes)

Withstand voltage I/P-O/P: 3KVAC, I/P-FG: 1.5KVAC, O/P-FG: 0.5KVAC, for 1 min.

Isolation resistance I/P-O/P, I/P-FG, O/P-FG: 500VDC / 100M Ohms min.

Working temp., humidity -10°C~+60% (refer to output derating curve), 20%-90% RH

Storage temp., humidity -20°C~+85°C, 10%-95% RH

Dimensions 7.83x3.86x1.5 inches (199x98x38mm), case 902

Weight 1.43 lbs (0.65 Kgs)

Safety standards UL1012, EN60950 (IEC950, UL1950) approved

EMC standards CISPR22 (EN55022), IEC801-2,3,4 IEC555-2 verification

Notes: 1. All parameters are specified at 230VAC input, rated load, 25°C, 70% RH ambient

2. Tolerance includes set up tolerance, line regulation, load regulation

3. Ripple & noise are measured at 20MHz by using a 12” twisted pair terminated with a 0.1uF & 47 uF capacitor

4. Line regulation is measured from low line to high line at rated load

5, Load regulation is measure from 0% to 100% rated load

*V-Infinity reserves the right to make changes to its products or to discontinue any product or service without notice, and to advise cus-

tomers to verify the most up-to-date product information before placing orders. V-Infinity assumes no liability or responsibility for cus-

tomer’s applications using V-Infinity products other than repair or replacing (at V-I’s option) V-Infinity products not meeting V-I’s pub-

lished specifications. Nothing will be covered outside of standard product warranty.

Features

·AC input range selectable by switch

·Protections:Short circuit/Over load/Over voltage

·Cooling by free air convection

·100% full load burn-in test

·Fixed switching frequency at 83KHz

·2 years warranty