20 MOS FET Relays G3VM-61BR/ER
■Absolute Maximum Ratings (Ta = 25°C)
■Electrical Characteristics (Ta = 25°C)
■Recommended Operating Conditions
Use the G3VM under the following conditions so that the Relay will operate properly.
Item Symbol Rating Unit Measurement Conditions
Input LED forward current IF30 mA
Repetitive peak LED forward
current
IFP 1 A 100 μs pulses, 100 pps
LED forward current reduction
rate
Δ IF/°C−0.3 mA/°CT
a ≥ 25°C
LED reverse voltage VR5V
Connection temperature Tj125 °C
Output Load voltage (AC peak/DC) VOFF 60 V
Continuous load current IO2,500 mA
ON current reduction rate Δ ION/°C−22 mA/°CT
a ≥ 25°C
Connection temperature Tj125 °C
Dielectric strength between input and
output (See note 1.)
VI-O 2,500 Vrms AC for 1 min
Operating temperature Ta−20 to +85 °C With no icing or condensation
Storage temperature Tstg −40 to +125 °C With no icing or condensation
Soldering temperature (10 s) --- 260 °C10 s
Note: 1. The dielectric strength between the input and
output was checked by applying voltage be-
tween all pins as a group on the LED side and
all pins as a group on the light-receiving side.
Item Symbol Mini-
mum Typical Maxi-
mum Unit Measurement
conditions
Input LED forward voltage VF1.18 1.33 1.48 V IF = 10 mA
Reverse current IR--- --- 10 μAV
R = 5 V
Capacity between terminals CT--- 70 --- pF V = 0, f = 1 MHz
Trigger LED forward current IFT --- 1.0 3 mA IO = 1 A
Output Maximum resistance with output ON RON --- 0.065 0.1 ΩIF = 10 mA, IO = 2 A
Current leakage when the relay is open ILEAK --- 1.0 10 nA VOFF = 60 V
Capacity between terminals COFF --- 400 600 pF V = 0, f = 1MHz
Capacity between I/O terminals CI-O --- 0.8 --- pF f = 1 MHz, Vs = 0 V
Insulation resistance RI-O 1,000 --- --- MΩVI-O = 500 VDC,
RoH ≤ 60%
Tu r n - O N t i m e tON --- 1.0 1.5 ms IF = 10 mA, RL = 200 Ω,
VDD = 20 V (See note 2.)
Turn-OFF time tOFF --- 0.2 0.4 ms
V
OUT
I
F
t
ON
t
OFF
10% 90%
I
F
1
2
6
4
R
L
V
DD
V
OU
Note: 2. Turn-ON and Turn-OFF
Times
Item Symbol Minimum Typical Maximum Unit
Load voltage (AC peak/DC) VDD --- --- 48 V
Operating LED forward current IF10 --- 20 mA
Continuous load current (AC peak/DC) IO--- --- 2,500 mA
Operating temperature Ta25 --- 60 °C