15-13D/R6GHBHC-A01/2T - Everlight

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 1 of 12

Device No. : DSE-00005368 Prepared date: 05-Jul-2011 Prepared by : Esther Yan

Technical Data Sheet

Full Color Chip LED

15-13D/R6GHBHC-A01/2T

Features

․Package in 8mm tape on 7〞diameter reel.

․Compatible with automatic placement equipment.

․Compatible with infrared and vapor phase reflow

solder process.

․Multi-color type.

․Pb-free.

․ESD Protect.

․The product itself will remain within RoHS

compliant version.

Descriptions

․The 15-13D SMD Taping is much smaller

than lead frame type components, thus

enable smaller board size, higher packing

density, reduced storage space and finally

smaller equipment to be obtained.

․Besides, lightweight makes them ideal for

miniature applications. etc.

Applications

․Backlighting in dashboard and switch.

․Telecommunication: indicator and backlighting in

telephone and fax.

․Flat backlight for LCD, switch and symbol.

․General use.

Device Selection Guide

Chip Resin Color

Type Material Emitted Color

R6 AlGaInP Brilliant Red

Water Clear GH InGaN Brilliant Green

BH InGaN Blue

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 2 of 12

Device No. : DSE-00005368 Prepared date: 05-Jul-2011 Prepared by : Esther Yan

15-13D/R6GHBHC-A01/2T

Package Outline Dimensions

Anode Mark

0.6

1.1

2.0

0.9

3.2

2.6

0.7 1.8 0.7 1.8

4.6

0.5

2.3

R

G

B

Note: The tolerances unless mentioned is ±0.1mm,Unit = mm

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 3 of 12

Device No. : DSE-00005368 Prepared date: 05-Jul-2011 Prepared by : Esther Yan

15-13D/R6GHBHC-A01/2T

Absolute Maximum Ratings (Ta=25℃)

Parameter Symbol Rating Unit

Reverse Voltage VR 5 V

Forward Current IF

R6:25

GH:25

BH:25

mA

Peak Forward Current

(Duty 1/10 @1KHz) IFP

R6:60

GH:100

BH:100

mA

Power Dissipation Pd

R6:60

GH:110

BH:110

mW

Electrostatic Discharge(HBM) ESD

R6:2000

GH:2000

BH:2000

V

Operating Temperature Topr -40 ~ +85 ℃

Storage Temperature Tstg -40 ~ +90 ℃

Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec.

Hand Soldering : 350 ℃ for 3 sec.

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 4 of 12

Device No. : DSE-00005368 Prepared date: 05-Jul-2011 Prepared by : Esther Yan

15-13D/R6GHBHC-A01/2T

Electro-Optical Characteristics (Ta=25℃)

Parameter Symbol Min. Typ. Max. Unit Condition

Luminous Intensity

R6

Iv GH

BH

90

112

45

140

180

70

----- mcd IF=20mA

Viewing Angle 2θ1/2 ----- 120 ----- deg IF=20mA

Peak Wavelength

R6

λp GH

BH

-----

632

518

468

----- nm IF=20mA

Dominant Wavelength

R6

λd GH

BH

-----

624

525

470

----- nm IF=20mA

Spectrum Radiation

Bandwidth

R6

△λ GH

BH

-----

20

35

25

----- nm IF=20mA

Forward Voltage

R6

VF GH

BH

1.7

2.7

2.0

3.3

2.4

3.7

V IF=20mA

Reverse Current

R6

IR GH

BH

----- -----

10

50

μA VR=5V

Notes:

1.Tolerance of Luminous Intensity ±11%

2.Tolerance of Forward Voltage ±0.05V

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 5 of 12

Device No. : DSE-00005368 Prepared date: 05-Jul-2011 Prepared by : Esther Yan

15-13D/R6GHBHC-A01/2T

Typical Electro-Optical Characteristics Curves

R6

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 6 of 12

Device No. : DSE-00005368 Prepared date: 05-Jul-2011 Prepared by : Esther Yan

15-13D/R6GHBHC-A01/2T

Typical Electro-Optical Characteristics Curves

GH

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 7 of 12

Device No. : DSE-00005368 Prepared date: 05-Jul-2011 Prepared by : Esther Yan

15-13D/R6GHBHC-A01/2T

Typical Electro-Optical Characteristics Curves

BH

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 8 of 12

Device No. : DSE-00005368 Prepared date: 05-Jul-2011 Prepared by : Esther Yan

15-13D/R6GHBHC-A01/2T

Label Explanation

CAT: Luminous Intensity Rank

HUE: Dom. Wavelength Rank

REF: Forward Voltage Rank

Reel Dimensions

Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm

RoHS

Pb

CPN :

PN : XXXXXXXXXXXXX

XXXXXXXXXXXXX

QTY : XXX

LOT NO : XXXXXXXXXX

Reference : XXXXXXXX

CAT : XXX

HUE : XXX

REF : XXX

EVERLIGHT

MADE IN TAIWAN

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 9 of 12

Device No. : DSE-00005368 Prepared date: 05-Jul-2011 Prepared by : Esther Yan

15-13D/R6GHBHC-A01/2T

Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel

Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm

Moisture Resistant Packaging

Label Desiccant Label

Aluminum moisture-proof bag

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 10 of 12

Device No. : DSE-00005368 Prepared date: 05-Jul-2011 Prepared by : Esther Yan

15-13D/R6GHBHC-A01/2T

Reliability Test Items And Conditions

The reliability of products shall be satisfied with items listed below.

Confidence level：90%

LTPD：10%

No. Items Test Condition

Test

Hours/Cycles Sample

Size Ac/Re

1 Reflow Soldering

Temp. : 260℃±5℃

Max. 10sec. 6 Min. 22 PCS. 0/1

2 Temperature Cycle

H : +100℃ 15min

∫ 5 min

L : -40℃ 15min 300 Cycles 22 PCS. 0/1

3 Thermal Shock

H : +100℃ 5min

∫ 10 sec

L : -10℃ 5min 300 Cycles 22 PCS. 0/1

4 High Temperature

Storage Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1

5 Low Temperature

Storage Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1

6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1

7 High Temperature /

High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 11 of 12

Device No. : DSE-00005368 Prepared date: 05-Jul-2011 Prepared by : Esther Yan

15-13D/R6GHBHC-A01/2T

Precautions For Use

1. Over-current-proof

Customer must apply resistors for protection, otherwise slight voltage shift will cause big

current change ( Burn out will happen ).

2. Storage

2.1 Do not open moisture proof bag before the products are ready to use.

2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less.

2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less.

If unused LEDs remain, it should be stored in moisture proof packages.

2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the

storage time, baking treatment should be performed using the following conditions.

Baking treatment : 60±5℃ for 24 hours.

3. Soldering Condition

3.1 Pb-free solder temperature profile

Pre-heating

150~200°C

60~120sec.

A bove 217°C

60~150sec.

260°C M ax.

10sec. Max.

6°C/sec.Max.

Above255°C

30sec.Max.

3°C/sec.Max.

3.2 Reflow soldering should not be done more than two times.

3.3 When soldering, do not put stress on the LEDs during heating.

3.4 After soldering, do not warp the circuit board.

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 12 of 12

Device No. : DSE-00005368 Prepared date: 05-Jul-2011 Prepared by : Esther Yan

15-13D/R6GHBHC-A01/2T

4.Soldering Iron

Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds

within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do

soldering of each terminal. Be careful because the damage of the product is often started at the time of the

hand solder.

5.Repairing

Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a

double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether

the characteristics of the LEDs will or will not be damaged by repairing.

EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936

Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-6306

Tucheng, Taipei 236, Taiwan, R.O.C http://www.everlight.com