0.8mm pitch connector For cable IDC type male connector for cable HDRA-E68M( )1+ IDC ANSI/SFF8441 Configuration of product Part No. HDRA- E 68 M ( ) 1+ 35 21.2 Series name IDC method No. of contacts: 68 1: One side IDC Type of contact M: IDC type, male Compatible cable Blank: AWG#30 (1/0.254), dia. 0.58 mm A : AWG#30 (7/0.1), dia. 0.58 mm C : AWG#34 (7/0.064), dia. 0.44 mm 68 POS.#35 POS.#68 0.833=26.4 25 4.84 2.18 0.8 31.95 POS.#1 POS.#34 1 34 Components POS.#34 POS.#1 Contacts POS.#68 POS.#35 Insulator Shell Cable housing Mating connector: HDRA series right-angle through hole type or straddle SMT type female connector For use with housings: HDRA series vertical housing, HDRA-E68LGKP ( ) Required tool: Termination tool: FHAT-0027, IDC tool: FLPT-0021A, Hand presser: RPS-K4 (Refer to page Tool-10) Through hole SMT Press-in IDC Wire Soldering Crimping wrapping Others