F-219 (Rev 07AUG19) RPCU-G-00.25-BMS-AM RPBU-01-S-A-RA RPBU, RPCU SERIES IP68 SEALED USB PANEL MOUNT Mates with: RCU (Single Port only) SPECIFICATIONS NO. OF PORTS RPBU For complete specifications see www.samtec.com?RPBU -02 -B -RA = Right-angle (16.80) .661 TYPE -A TYPE -B (36.20) 1.425 (17.06) .672 (3.51) .138 DIA B C (9.53) .375 (0.65) .026 -B-VT RPCU (0.65) .026 PLATING For complete specifications see www.samtec.com?RPCU -G = 30 " (0.76 m) Gold on contact, Nickel on shell NO. OF PORTS A B C -01 (48.15) 1.896 (69.80) 2.748 (39.10) 1.539 (60.75) 2.392 (20.01) .788 (42.00) 1.654 -02 -A-RA -A-VT -B-RA SPECIFICATIONS Insulator Material: Black Liquid Crystal Polymer Contact Material: Phosphor Bronze Operating Temp Range: -20 C to +80 C Shield Material: Phosphor Bronze Wire: 20 AWG (Power) 25 AWG (Signal) 28 AWG (Drain) = Locking Clip (-VT only) A (20.50) .807 * DCA-RPBU-01-01-A * DCA-RPBU-02-01-A * DCA-RPBU-01-01-B -LC -VT = Dual Port (-A only) (45.20) 1.780 OPTION = Vertical Through-hole = USB B Type DUST CAPS Mates with: RCU -A = USB A Type = 30 " (0.76 m) Gold on contact, Matte tin on tail = Single Port LEAD STYLE TYPE -S -01 Insulator Material: Black Liquid Crystal Polymer Contact: Phosphor Bronze Current Rating: 4.2 A per pin (1 pin powered) Operating Temp Range: -20 C to +80 C Seal: Silicone Lead-Free Solderable: Yes PLATING END 1 OPTION CABLE LENGTH -00.25 = (0.25 m) 9.84" Cable -00.50 = (0.50 m) 19.68" Cable Standard lengths (Assembled Length = Cable Length + (42.8 mm) 1.69") -AMS = USB A Type, Sealed -BMS = USB B Type, Sealed END 2 OPTION -AM = USB A Type, Not Sealed -BM = USB B Type, Not Sealed -BC = Blunt Cut Cable Length + (42.8) 1.69 DUST CAPS ALSO AVAILABLE * DCA-RPBU-01-01-A * DCA-RPBU-01-01-B (MOQ Required) (15.90) .626 (20.00) .787 -AMS -AM Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtec's specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply. * Other wire lengths