LITE-ON SEMICONDUCTOR STPR810D thru STPR860D REVERSE VOLTAGE - 100 to 600 Volts FORWARD CURRENT- 8.0 Amperes POWER FACTOR CORRECTION RECTIFIERS (PFC DIODE) TO-220AC FEATURES Power Factor Correction function. Glass passivated chip Superfast switching time for high efficiency Low forward voltage drop and high current capability Low reverse leakage current B L M C D A K High surge capacity Plastic package has UL flammability classification 94V-0 C D E PIN 1 TO-220AC DIM. A B 2 E F F G I MECHANICAL DATA J H Case : TO-220AC molded plastic Polarity : As marked on the body Weight : 0.08 ounces, 2.24 grams Mounting position : Any Max. mounting torque = 0.5 N.m (5.1 Kgf.cm) PIN 1 CASE PIN 2 MAX. 15.88 10.67 2.54 3.43 5.84 8.26 - 6.86 9.28 6.35 14.73 G H 12.70 4.83 5.33 I J 0.51 0.30 3.53 3.56 1.14 0.64 4.09 4.83 K L M N MIN. 14.22 9.65 1.14 1.40 2.92 N 2.03 All Dimensions in millimeter MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified. SYMBOL CHARACTERISTICS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current @TC=100 C Peak Forward Surge Current 8.3ms single half-sine-wave superimposed on rated load VRRM VRMS VDC STPR 810D 100 70 100 STPR 820D 200 140 200 STPR 830D 300 210 300 STPR 840D 400 280 400 STPR 850D 500 350 500 STPR 860D 600 420 600 UNIT V V V I(AV) 8 A IFSM 90 A Maximum Forward Voltage at 8.0A @TJ =25 C DC @TJ =125 C VF @TJ =25 C @TJ =125 C IR 10 500 uA CJ 60 pF Maximum DC Reverse Current at Rated DC Blocking Voltage Typical Junction Capacitance (Note 1) 1.1 1.0 1.3 1.2 35 Maximum Reverse Recovery Time (Note 2) TRR Typical Thermal Resistance (Note 3) R0JC 3.0 TJ ,TSTG -55 to +150 Operating and Storage Temperature Range 30 NOTES : 1. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 2. Reverse Recovery Test Conditions:IF=0.5A,IR=1.0A,IRR=0.25A. 3. Thermal Resistance Junction to case. 1.5 1.4 V 50 ns C/W C REV. 3, Sep-2010, KTGA14 RATING AND CHARACTERISTIC CURVES STPR810D thru STPR860D FIG.2 - MAXIMUM NON-REPETITIVE SURGE CURRENT 150 125 8 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD CURRENT AMPERES FIG.1 - FORWARD CURRENT DERATING CURVE 10 100 6 75 4 50 2 25 RESISTIVE OR INDUCTIVE LOAD 0 8.3ms Single Half-Sine-Wave 0 25 50 75 100 125 150 175 1 2 5 CASE TEMPERATURE , C 50 100 NUMBER OF CYCLES AT 60Hz FIG.3 - TYPICAL REVERSE CHARACTERISTICS FIG.4 - TYPICAL FORWARD CHARACTERISTICS 1000 PERCENT OF FORWARD CURRENT (%) PERCENT OF FORWARD CURRENT ,(%) 200 100 TJ = 125 C 10 TJ = 75 C 1.0 0.1 TJ = 25 C 180 VB@ 100~200V 160 VB@ 300~400V VB@ 500~600V 140 120 100 80 60 40 20 0 0.01 0 20 40 60 80 0 140 120 100 0.2 0.4 0.6 FIG.5 - TYPICAL JUNCTION CAPACITANCE 1000 100 TJ = 25 C, f= 1MHz 10 0.1 1 0.8 1 1.2 1.4 INSTANTANEOUS FORWARD VOLTAGE, VOLTS PERCENT OF RATED PEAK REVERSE VOLTAGE (%) CAPACITANCE , (pF) INSTANTANEOUS REVERSE CURRENT ,(uA) 20 10 4 10 REVERSE VOLTAGE , VOLTS 100 1.6 1.8 Legal Disclaimer Notice STPR810D thru STPR860D Important Notice and Disclaimer LSC reserves the right to make changes to this document and its products and specifications at any time without notice. Customers should obtain and confirm the latest product information and specifications before final design, purchase or use. LSC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does LSC assume any liability for application assistance or customer product design. LSC does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. No license is granted by implication or otherwise under any intellectual property rights of LSC. LSC products are not authorized for use as critical components in life support devices or systems without express written approval of LSC.