RF-18 MH113-MH1RP-MH1RP-0300 MH113-MH1RP-01BJ1-0300 MH113* SERIES MICRO HIGH FREQUENCY RF CABLES U.FL Type SPECIFICATIONS For complete specifications see www.samtec.com?MH113 Outer Contact Material: Au plated Phosphor Bronze Center Contact Material: Au plated Phosphor Bronze (MHX) Au plated BeCu (SMA) Insulator Material: PBT (MHX) PTFE (SMA) Operating Temperature: -40 C to +90 C Voltage Rating: 170 V max Dielectric Withstanding Voltage: 200 Vrms Frequency Range: 0~6 GHz Impedance: 50 RoHS Compliant: Yes Micro High Frequency RF, MHF or SMA Bulkhead (1.13 mm) .045" Diameter Cable MATING SOLUTIONS APPLICATION 2.4 mm (2.5 mm MAX) -MH1RP 1.13 mm Cable: END 1 CONNECTOR MH113 * MH1RP end mates with RSP-122811-01 (Cycles: 30 max.) END 2 CONNECTOR OVERALL LENGTH -0030 Specify END OPTIONS from chart = 1.18" (30 mm) -0050 = 1.97" (50 mm) -0100 XXXX = OAL (millimeters) (2.69) .106 DIA = 3.94" (100 mm) (8.00) .315 Hex. -0150 = 5.91" (150 mm) -0300 = 11.81" (300 mm) ALSO AVAILABLE (MOQ Required) END OPTIONS -MH1RP = MHF1 Type Plug (3.9 " (.1 m) Gold on Center Contact, 1.9 u" (.05 m) Gold on Shell) * Additional stripping and tinning options * Additional end connector combinations * Overall lengths Contact Samtec. STRIPPED & TINNED (Dimensions in mm) -01BJ1 = SMA Straight Bulkhead Jack -01BJ2 = SMA Straight Bulkhead Jack, Reversed Polarity -01SB1 = SMA Straight Jack, Sealed Bulkhead -01SR1 = SMA Straight Jack, Sealed Bulkhead, Reversed Polarity (30 " (0.76 m) Gold on Center Contact, Gold Flash on Shell) EXTRACTION TOOL * -MH1RP = RSP-122893-01 previously RF113 Series Mating PCB connectors available 1.4 mm (1.55 mm MAX) Impedance: 50 W Capacitance: 95 pF/meter Max Attenuation (cable only): 2 dB @ 1 GHz Conductor Size: 32 AWG, (1.13 mm) .045" dia. Conductor Material: Silver Plated Copper Conductor Resistance: 0.60 W/meter max Insulator Diameter: (0.66 mm) .026" Insulator Material: FEP Shield Material: Tinned Copper Jacket Material: FEP Jacket Diameter: (1.13 mm) .045" dia Bend Radius: 6.8 mm Jacket Temp Rating: -40 C to +90 C RoHS Compliant: Yes * MH113 Series was * Micro RF PCB connectors for Micro High Frequency RFs CALLOUT -303030 -303040 -403030 -403040 -404040 -SING = Single Ended (End 2 callout) XXXXXX = Stripped & Tinned (End 2 callout) B C A Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtec's specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply. A 3.0 3.0 4.0 4.0 4.0 B 3.0 3.0 3.0 3.0 4.0 C 3.0 4.0 3.0 4.0 4.0 Both center conductor and braid shield are stripped, only the center conductor is tinned.