Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductor's system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to Fairchild_questions@onsemi.com. ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. FFB2907A / FMB2907A / MMPQ2907A PNP Multi-Chip General-Purpose Amplifier Description This device is designed for use as a general-purpose amplifier and switch for collector currents to 500 mA. Sourced from Process 63. Block Diagram E2 E2 C2 B2 B1 C1 E1 B2 C1 C2 SC70-6 Mark: .2F E1 pin #1 B1 Figure 1. FFB2907A Device Package Figure 2. FFB2907A Internal Connections C2 E1 C2 B2 E1 E2 C1 B1 C1 B2 E2 pin #1 B1 SuperSOTTM-6 Mark: .2F Dot denotes pin #1 Figure 3. FMB2907A Device Package E1 B1 E2 B2 E3 B3 E4 SOIC-16 Mark: MMPQ2907A pin #1 C1 Figure 4. FMB2907A Internal Connections B4 C2 C1 C3 C2 B2 E2 B2 E3 B3 E4 B4 C1 C1 C2 C2 C3 C3 C4 C4 C4 C4 C3 Figure 5. MMPQ2907A Device Package Figure 6. MMPQ2907A Internal Connections (c) 1998 Fairchild Semiconductor Corporation FFB2907A / FMB2907A / MMPQ2907A Rev. 1.1.0 E1 www.fairchildsemi.com 1 FFB2907A / FMB2907A / MMPQ2907A -- PNP Multi-Chip General-Purpose Amplifier January 2014 Part Number Top Mark Package Packing Method FFB2907A .2F SC70 6L Tape and Reel FMB2907A .2F SSOT 6L Tape and Reel MMPQ2907A MMPQ2907A SOIC 16L Tape and Reel Absolute Maximum Ratings(1),(2) Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Values are at TA = 25C unless otherwise noted. Symbol Parameter Value Unit VCEO Collector-Emitter Voltage -60 V VCBO Collector-Base Voltage -60 V VEBO Emitter-Base Voltage -5.0 V Collector Current - Continuous -600 mA -55 to +150 C IC TJ, TSTG Junction and Storage Temperature Notes: 1. These ratings are based on a maximum junction temperature of 150C. 2. These are steady-state limits. Fairchild Semiconductor should be consulted on applications involving pulsed or low-duty cycle operations. Thermal Characteristics(3) Values are at TA = 25C unless otherwise noted. Symbol PD RJA Max. Parameter Total Device Dissipation Unit FFB2907A FMB2907A MMPQ2907A 300 700 1,000 mW 8.0 mW/C Derate Above 25C 2.4 5.6 Thermal Resistance, Junction to Ambient 415 180 Thermal Resistance, Junction to Ambient, Effective 4 Die 125 Thermal Resistance, Junction to Ambient, Each Die 240 C/W Note: 3. PCB size: FR-4 76 x 114 x 1.57 mm3 (3.0 inch x 4.5 inch x 0.062 inch) with minimum land pattern size. (c) 1998 Fairchild Semiconductor Corporation FFB2907A / FMB2907A / MMPQ2907A Rev. 1.1.0 www.fairchildsemi.com 2 FFB2907A / FMB2907A / MMPQ2907A -- PNP Multi-Chip General-Purpose Amplifier Ordering Information Values are at TA = 25C unless otherwise noted. Symbol V(BR)CEO Parameter Collector-Emitter Breakdown Voltage(4) Conditions Min. Typ. Max. Unit IC = -10 mA, IB = 0 -60 V IC = -10 A, IE = 0 -60 V Emitter-Base Breakdown Voltage IE = -10 A, IC = 0 -5.0 Base Cut-Off Current VCE = -30 V, VEB = -0.5 V -50 nA ICEX Collector Cut-Off Current VCE = -30 V, VEB = -0.5 V -50 nA ICBO Collector Cut-Off Current V(BR)CBO Collector-Base Breakdown Voltage V(BR)EBO IBL hFE DC Current Gain V VCB = -50 V, IE = 0 -0.02 VCB = -50 V, IE = 0, TA = 125C -20 IC = -0.1 mA, VCE = -10 V 75 IC = -1.0 mA, VCE = -10 V 100 IC = -10 mA, VCE = -10 V 100 V(4) 100 IC = -500 mA, VCE = -10 V(4) 50 IC = -150 mA, VCE = -10 A 300 IC = -150 mA, IB = -15 mA -0.4 IC = -500 mA, IB = -50 mA -1.6 VCE(sat) Collector-Emitter Saturation Voltage(4) VBE(sat) Base-Emitter Saturation Voltage fT Current Gain-Bandwidth Product IC = -50 mA, VCE =- 20 V, f = 100 MHz 250 Cob Output Capacitance VCB = -10 V, IE = 0, f = 100 kHz 6.0 pF Cib Input Capacitance VEB = -2.0 V, IC = 0, f = 100 kHz 12 pF ton Turn-On Time 30 ns td Delay Time 8 ns tr Rise Time 20 ns 80 ns 60 ns 20 ns toff Turn-Off Time ts Storage Time tf Fall Time IC = -150 mA, IB = -15 mA(4) -1.3 IC = -500 mA, IB = -50 mA -2.6 VCC = -30 V, IC = -150 mA, IB1 = -15 mA VCC = -6.0 V, IC = -150 mA, IB1 = IB2 = -15 mA V V MHz Note: 4. Pulse test: pulse width 300 s, duty cycle 2.0%. (c) 1998 Fairchild Semiconductor Corporation FFB2907A / FMB2907A / MMPQ2907A Rev. 1.1.0 www.fairchildsemi.com 3 FFB2907A / FMB2907A / MMPQ2907A -- PNP Multi-Chip General-Purpose Amplifier Electrical Characteristics(4) VCESAT - COLLECTOR EMITTE R VOLTAGE (V) h FE - TYPICAL PULSED CURRENT GAIN 0.5 500 VCE = 5V 400 125 C 0.3 300 200 100 0 0.1 25 C 0.1 - 40 C 0.3 1 3 10 30 100 I C - COLLECTOR CURRENT (mA) 300 - 40 C 0 V BE( ON)- BAS E EMITTER ON VOLTAGE (V) V BESAT - BASE EMITTER VOLTAGE (V) - 40 C 1 25 C 0.6 10 100 I C - COLLECTOR CURRE NT (mA) 0.6 125 C 0.4 = 10 - 40 C 25 C 125 C VCE = 5V 0.2 0.2 1 10 100 I C - COLLECTOR CURRENT (mA) 500 1 0.8 0.8 500 0 0.1 1 10 I C - COLLECTOR CURRE NT (mA) 25 Figure 10. Base-Emitter On Voltage vs. Collector Current Figure 9. Base-Emitter Saturation Voltage vs. Collector Current 100 20 V CB = 35V CAPACITANCE (pF) I CBO - COLLE CTOR CURRENT (nA) 125 C Figure 8. Collector-Emitter Saturation Voltage vs. Collector Current 1 0 25 C 0.2 Figure 7. Typical Pulsed Current Gain vs. Collector Current 0.4 = 10 0.4 10 1 0.1 0.01 25 50 75 100 T A - AMBIE NT TEMP ERATURE ( C) 12 C ib 8 4 0 0.1 125 C ob 1 10 REVERSE BIAS VOLTAGE (V) 50 Figure 12. Input and Output Capacitance vs. Reverse Bias Voltage Figure 11. Collector Cut-Off Current vs. Ambient Temperature (c) 1998 Fairchild Semiconductor Corporation FFB2907A / FMB2907A / MMPQ2907A Rev. 1.1.0 16 www.fairchildsemi.com 4 FFB2907A / FMB2907A / MMPQ2907A -- PNP Multi-Chip General-Purpose Amplifier Typical Performance Characteristics 250 I B1 = I B2 = 200 500 Ic I B1 = I B2 = 10 400 V cc = 15 V ts 150 TIME (nS) TIME (nS) V cc = 15 V 100 tr tf 300 200 t off 50 100 t on td 0 10 100 I C - COLLECTOR CURRENT (mA) 0 10 1000 PD - POWE R DIS SIPATION (W) I B1 - TURN 0N BASE CURRENT (mA) 50 20 t r = 15 V 5 30 ns 2 60 ns 1 10 100 I C - COLLECTOR CURRENT (mA) 1000 1 SOIC-16 SOT-6 0.75 0.5 SC70 -6 0.25 0 500 0 25 50 75 100 TE MPE RATURE (C) 125 150 Figure 16. Power Dissipation vs. Ambient Temperature Figure 15. Rise Time vs. Collector and Turn-On Base Current (c) 1998 Fairchild Semiconductor Corporation FFB2907A / FMB2907A / MMPQ2907A Rev. 1.1.0 100 I C - COLLECTOR CURRENT (mA) Figure 14. Turn-On and Turn-Off Times vs. Collector Current Figure 13. Switching Times vs. Collector Current 10 Ic 10 www.fairchildsemi.com 5 FFB2907A / FMB2907A / MMPQ2907A -- PNP Multi-Chip General-Purpose Amplifier Typical Performance Characteristics (Continued) CHAR. RELATIVE TO VALUES AT VCE = -10V CHAR. RELATIVE TO VALUES AT I C= -10mA 5 h oe h re 2 h fe 1 h ie 0.5 VCE = -10 V T A = 25 oC 0.2 0.1_ _ 1 _ _ _ 2 5 10 20 I C - COLLECTOR CURRENT (mA) _ 50 1.2 h re and hoe h re h ie h fe hoe 1.1 1 h ie 0.9 h fe 0.8 -4 I C = -10mA T A = 25oC -8 -12 -16 V CE - COLLECTOR VOLTAGE (V) -20 Figure 18. Common Emitter Characteristics Figure 17. Common Emitter Characteristics CHAR. RELATIVE TO VALUES AT TA = 25oC 1.3 1.5 I C = -10mA 1.4 V = -10 V CE 1.3 1.2 h fe h ie h re hoe 1.1 hoe 1 0.9 0.8 0.7 h re h ie 0.6 0.5 -40 h fe -20 0 20 40 60 80 T A - AMBIENT TEMPERATURE ( o C) 100 Figure 19. Common Emitter Characteristics (c) 1998 Fairchild Semiconductor Corporation FFB2907A / FMB2907A / MMPQ2907A Rev. 1.1.0 www.fairchildsemi.com 6 FFB2907A / FMB2907A / MMPQ2907A -- PNP Multi-Chip General-Purpose Amplifier Typical Performance Characteristics (f = 1.0 kHz) FFB2907A / FMB2907A / MMPQ2907A -- PNP Multi-Chip General-Purpose Amplifier Physical Dimensions SC70 6L SYMM C L 2.000.20 0.65 A 0.50 MIN 6 4 B PIN ONE 1.250.10 1 1.90 3 0.30 0.15 (0.25) 0.40 MIN 0.10 0.65 A B 1.30 LAND PATTERN RECOMMENDATION 1.30 1.00 0.80 SEE DETAIL A 1.10 0.80 0.10 C 0.10 0.00 C 2.100.30 SEATING PLANE NOTES: UNLESS OTHERWISE SPECIFIED GAGE PLANE (R0.10) 0.25 0.10 0.20 A) THIS PACKAGE CONFORMS TO EIAJ SC-88, 1996. B) ALL DIMENSIONS ARE IN MILLIMETERS. C) DIMENSIONS DO NOT INCLUDE BURRS OR MOLD FLASH. D) DRAWING FILENAME: MKT-MAA06AREV6 30 0 0.46 0.26 SCALE: 60X Figure 20. 6-LEAD, SC70, EIAJ SC-88, 1.25 MM WIDE (ACTIVE) Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild's worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor's online packaging area for the most recent package drawings: http://www.fairchildsemi.com/dwg/MA/MAA06A.pdf. For current tape and reel specifications, visit Fairchild Semiconductor's online packaging area: http://www.fairchildsemi.com/packing_dwg/PKG-MAA06A.pdf. (c) 1998 Fairchild Semiconductor Corporation FFB2907A / FMB2907A / MMPQ2907A Rev. 1.1.0 www.fairchildsemi.com 7 FFB2907A / FMB2907A / MMPQ2907A -- PNP Multi-Chip General-Purpose Amplifier Physical Dimensions (Continued) SSOT 6L Figure 21. 6-LEAD, SUPERSOT-6, JEDEC MO-193, 1.6 MM WIDE (ACTIVE) Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild's worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor's online packaging area for the most recent package drawings: http://www.fairchildsemi.com/dwg/MA/MA06A.pdf. For current tape and reel specifications, visit Fairchild Semiconductor's online packaging area: http://www.fairchildsemi.com/packing_dwg/PKG-MA06A.pdf. (c) 1998 Fairchild Semiconductor Corporation FFB2907A / FMB2907A / MMPQ2907A Rev. 1.1.0 www.fairchildsemi.com 8 FFB2907A / FMB2907A / MMPQ2907A -- PNP Multi-Chip General-Purpose Amplifier Physical Dimensions (Continued) SO 16L NB 10.00 9.80 A 8.89 16 9 B 4.00 3.80 6.00 PIN ONE INDICATOR 1.75 1 5.6 8 0.51 0.35 1.27 (0.30) 0.25 M 1.27 C B A 0.65 LAND PATTERN RECOMMENDATION 1.75 MAX 1.50 1.25 SEE DETAIL A 0.25 0.10 C 0.25 0.19 0.10 C 0.50 0.25 X 45 NOTES: UNLESS OTHERWISE SPECIFIED (R0.10) GAGE PLANE A) THIS PACKAGE CONFORMS TO JEDEC MS-012, VARIATION AC, ISSUE C. B) ALL DIMENSIONS ARE IN MILLIMETERS. C) DIMENSIONS ARE EXCLUSIVE OF BURRS, MOLD FLASH AND TIE BAR PROTRUSIONS D) CONFORMS TO ASME Y14.5M-1994 E) LANDPATTERN STANDARD: SOIC127P600X175-16AM F) DRAWING FILE NAME: M16AREV12. (R0.10) 0.36 8 0 SEATING PLANE 0.90 0.50 (1.04) DETAIL A SCALE: 2:1 Figure 22. 16-LEAD, SOIC, JEDEC MS-012, 0.150 inch, NARROW BODY (ACTIVE) Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild's worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor's online packaging area for the most recent package drawings: http://www.fairchildsemi.com/dwg/M1/M16A.pdf. For current tape and reel specifications, visit Fairchild Semiconductor's online packaging area: http://www.fairchildsemi.com/packing_dwg/PKG-M16A.pdf. (c) 1998 Fairchild Semiconductor Corporation FFB2907A / FMB2907A / MMPQ2907A Rev. 1.1.0 www.fairchildsemi.com 9 TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks. AccuPower AX-CAP(R)* BitSiC Build it Now CorePLUS CorePOWER CROSSVOLT CTL Current Transfer Logic DEUXPEED(R) Dual CoolTM EcoSPARK(R) EfficientMax ESBC F-PFS FRFET(R) SM Global Power Resource GreenBridge Green FPS Green FPS e-Series Gmax GTO IntelliMAX ISOPLANAR Making Small Speakers Sound Louder and BetterTM MegaBuck MICROCOUPLER MicroFET MicroPak MicroPak2 MillerDrive MotionMax mWSaver(R) OptoHiT OPTOLOGIC(R) OPTOPLANAR(R) (R) Fairchild(R) Fairchild Semiconductor(R) FACT Quiet Series FACT(R) FAST(R) FastvCore FETBench FPS Sync-LockTM (R) PowerTrench(R) PowerXSTM Programmable Active Droop QFET(R) QS Quiet Series RapidConfigure Saving our world, 1mW/W/kW at a timeTM SignalWise SmartMax SMART START Solutions for Your Success SPM(R) STEALTH SuperFET(R) SuperSOT-3 SuperSOT-6 SuperSOT-8 SupreMOS(R) SyncFET (R)* TinyBoost(R) TinyBuck(R) TinyCalc TinyLogic(R) TINYOPTO TinyPower TinyPWM TinyWire TranSiC TriFault Detect TRUECURRENT(R)* PSerDes UHC(R) Ultra FRFET UniFET VCX VisualMax VoltagePlus XSTM * Trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD'S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in cause the failure of the life support device or system, or to affect its safety or effectiveness. accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. ANTI-COUNTERFEITING POLICY Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com, under Sales Support. Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Advance Information Formative / In Design Preliminary First Production No Identification Needed Full Production Obsolete Not In Production Definition Datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only. Rev. I66 (c) Fairchild Semiconductor Corporation www.fairchildsemi.com ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com (c) Semiconductor Components Industries, LLC N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 www.onsemi.com 1 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative www.onsemi.com