Subject to change without notice * (c) Hans Turck GmbH & Co.KG 2002 * Edition: Hans Turck GmbH & Co.KG * Postfach * D-45466 Mulheim an der Ruhr * Telefon 02 08/49 52-0 * Telefax 02 08/49 52-264 Inductive sensor Ni4-S12-AN6X M12 x 1 17/8 40 60 threaded barrel, M12 x 1 plastic, PA12-GF30 3-wire DC, 10...30 VDC normally open npn output cable connection Wiring diagram LED 4 npn Type Ident-No. Ni4-S12-AN6X 46533 Rated operating distance Sn Mounting mode Hysteresis (switching distance) Min. repeat accuracy Temperature drift Operating temperature 4 mm non-flush 3... 15 % 2 % 10 % -25 ...+ 70 C Rated operational voltage (DC) UB 10... 30 VDC Max. ripple 10 % Upp Rated operational current (DC) Ie 200 mA No-load current I0 15 mA Max. OFF-state current Max. switching frequency Rated insulation voltage Output function Short-circuit protection Max. voltage drop at Ie 0,1 mA 2 kHz 0,5 kV 3-wire, normally open, NPN yes, cyclic 1,8 V Wire breakage / reverse polarity protection yes / complete Housing style Dimensions Housing material Active face Max. fixing torque of coupling nut Wiring Cable Cable cross section Vibration resistance Shock resistance Degree of protection threaded barrel; M12 x 1 64 mm plastic, PA12-GF30 plastic, PA12-GF30 1 Nm cable O 5,2, LifYY, PVC, 2 m 3 x 0,34 mm2 55 Hz (1 mm) 30 x g (11 ms) IP67 Switching status indication LED yellow BU BN + BK Function principles Inductive proximity switches are designed for wear-free non-contact detection of metal objects. For this they use a high-frequency electro-magnetic AC field that interacts with the target. With inductive sensors, this field is generated by an LC resonant circuit with a ferrite core coil. Subject to change without notice * (c) Hans Turck GmbH & Co.KG 2002 * Edition: * 15.04.2004 Hans Turck GmbH & Co.KG * Postfach * D-45466 Mulheim an der Ruhr * Telefon 02 08/49 52-0 * Telefax 02 08/49 52-264 Subject to change without notice * (c) Hans Turck GmbH & Co.KG 2002 * Edition: Hans Turck GmbH & Co.KG * Postfach * D-45466 Mulheim an der Ruhr * Telefon 02 08/49 52-0 * Telefax 02 08/49 52-264 Inductive sensor Ni4-S12-AN6X Mounting instructions Gap D Gap W Gap T Gap S Gap G Gap N minimum gap 3xB 3 x Sn 3xB 1,5 x B 6 x Sn 2 x Sn Diameter of active face B O 12 mm N G S D T W Subject to change without notice * (c) Hans Turck GmbH & Co.KG 2002 * Edition: * 15.04.2004 Hans Turck GmbH & Co.KG * Postfach * D-45466 Mulheim an der Ruhr * Telefon 02 08/49 52-0 * Telefax 02 08/49 52-264 Subject to change without notice * (c) Hans Turck GmbH & Co.KG 2002 * Edition: Hans Turck GmbH & Co.KG * Postfach * D-45466 Mulheim an der Ruhr * Telefon 02 08/49 52-0 * Telefax 02 08/49 52-264 Inductive sensor Ni4-S12-AN6X Accessories Typ QM-12 IdentNo. 6945101 Description Dimension drawing quick-mount fixing clamp with dead-stop; material: chrome-plated brass external thread M16 x 1 22/4 o 12 BST-12B 6947212 19,5 34 fixing clamp with dead-stop; material: PA6 M5 20 28 40 18 o 12 30 Subject to change without notice * (c) Hans Turck GmbH & Co.KG 2002 * Edition: * 15.04.2004 Hans Turck GmbH & Co.KG * Postfach * D-45466 Mulheim an der Ruhr * Telefon 02 08/49 52-0 * Telefax 02 08/49 52-264