US
UK
Taiwan
China
Singapore
+1-847-639-6400 sales@coilcraft.com
+44-1236-730595 sales@coilcraft-europe.com
+886-2-2264 3646 sales@coilcraft.com.tw
+86-21-6218 8074 sales@coilcraft.com.cn
+ 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Chip Inductors
–
1206CS Series (3216)
Document 104-1
Document 104-1 Revised 01/11/12
Inductance2 Percent
SRF min5 DCR max6 Irms7
Part number1 (nH) tolerance3 Q min4 (MHz) (Ohms) (mA)
1206CS-030X_L_ 3.3 @ 100 MHz 5 30 @ 300 MHz 6200 0.050 1000
1206CS-060X_L_ 6.8 @ 100 MHz 5 30 @ 300 MHz 5500 0.070 1000
1206CS-100X_L_ 10 @ 100 MHz 5 40 @ 300 MHz 4000 0.080 1000
1206CS-120X_L_ 12 @ 100 MHz 5,2 40 @ 300 MHz 3200 0.080 1000
1206CS-150X_L_ 15 @ 100 MHz 5,2 40 @ 300 MHz 3200 0.100 1000
1206CS-180X_L_ 18 @ 100 MHz 5,2 50 @ 300 MHz 2800 0.100 1000
1206CS-220X_L_ 22 @ 100 MHz 5,2 50 @ 300 MHz 2200 0.100 1000
1206CS-270X_L_ 27 @ 100 MHz 5,2 50 @ 300 MHz 1800 0.110 1000
1206CS-330X_L_ 33 @ 100 MHz 5,2 55 @ 300 MHz 1800 0.110 1000
1206CS-390X_L_ 39 @ 100 MHz 5,2 55 @ 300 MHz 1800 0.120 1000
1206CS-470X_L_ 47 @ 100 MHz 5,2 55 @ 300 MHz 1500 0.130 1000
1206CS-560X_L_ 56 @ 100 MHz 5,2,1 55 @ 300 MHz 1450 0.140 1000
1206CS-680X_L_ 68 @ 100 MHz 5,2,1 55 @ 300 MHz 1200 0.260 900
1206CS-820X_L_ 82 @ 100 MHz 5,2,1 55 @ 300 MHz 1200 0.210 900
1206CS-101X_L_ 100 @ 100 MHz 5,2,1 55 @ 300 MHz 1100 0.260 850
1206CS-121X_L_ 120 @ 100 MHz 5,2,1 60 @ 300 MHz 1100 0.260 800
1206CS-151X_L_ 150 @ 100 MHz 5,2,1 60 @ 300 MHz 950 0.310 750
1206CS-181X_L_ 180 @ 50 MHz 5,2,1 60 @ 300 MHz 900 0.430 700
1206CS-221X_L_ 220 @ 50 MHz 5,2,1 60 @ 300 MHz 760 0.500 670
1206CS-271X_L_ 270 @ 50 MHz 5,2,1 55 @ 300 MHz 730 0.560 630
1206CS-331X_L_ 330 @ 50 MHz 5,2,1 45 @ 150 MHz 650 0.620 590
1206CS-391X_L_ 390 @ 50 MHz 5,2,1 45 @ 150 MHz 600 0.750 530
1206CS-471X_L_ 470 @ 50 MHz 5,2,1 45 @ 150 MHz 550 1.30 490
1206CS-561X_L_ 560 @ 35 MHz 5,2,1 45 @ 150 MHz 470 1.34 460
1206CS-621X_L_ 620 @ 35 MHz 5,2,1 45 @ 150 MHz 470 1.58 460
1206CS-681X_L_ 680 @ 35 MHz 5,2,1 45 @ 150 MHz 450 1.58 430
1206CS-751X_L_ 750 @ 35 MHz 5,2,1 45 @ 150 MHz 440 2.25 320
1206CS-821X_L_ 820 @ 35 MHz 5,2,1 45 @ 150 MHz 420 1.82 400
1206CS-911X_L_ 910 @ 35 MHz 5,2,1 45 @ 150 MHz 410 2.95 310
1206CS-102X_L_ 1000 @ 35 MHz 5,2,1 45 @ 150 MHz 400 2.80 320
1206CS-122X_L_ 1200 @ 35 MHz 5,2,1 45 @ 150 MHz 380 3.20 300
1. When ordering, specify tolerance, termination and packaging codes:
1206CS-122XJLC
Tolerance: F = 1% G = 2% J = 5%
(Table shows stock tolerances in bold.)
Termination: L = RoHS compliant silver-palladium-platinum-glass frit.
E = Halogen free component. RoHS compliant silver-
palladium-platinum-glass frit terminations.
Special order: T = RoHS tin-silver-copper
(95.5/4/0.5) or S = non-RoHS tin-lead (63/37).
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic
tape (2000 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge),
use code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic
tape. Factory order only, not stocked (7500 parts
per full reel).
2. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/HP
4286A impedance analyzer with Coilcraft-provided correlation pieces.
3. Tolerances in bold are stocked for immediate shipment.
4. Q measured using an Agilent/HP 4291A with an Agilent/HP 16193 test
fixture.
5. SRF measured using an Agilent/HP 8720D network analyzer and a
Coilcraft SMD-D test fixture.
6. DCR measured on a Cambridge Technology Micro-ohmmeter and a
Coilcraft CCF840 fixture.
7. Current that causes a 15°C temperature rise from 25°C ambient.
8. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Refer to Doc 174 “Color Coding” for the explanation of color dots.
• HighSRFandexcellentQvalues
• Tighttolerances,manyvaluesat1%
• 31inductancevaluesfrom3.3to1200nH
Request free evaluation samples by contacting Coilcraft
or visiting www.coilcraft.com.
US
UK
Taiwan
China
Singapore
+1-847-639-6400 sales@coilcraft.com
+44-1236-730595 sales@coilcraft-europe.com
+886-2-2264 3646 sales@coilcraft.com.tw
+86-21-6218 8074 sales@coilcraft.com.cn
+ 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
1206CS Series (3216)
Document 104-2
Document 104-2 Revised 01/11/12
Typical Q vs Frequency Typical L vs Frequency
1000
10000
100
10
1 10010
Frequency (MHz)
Inductance (nH)
1000
1
1200 nH
560 nH
150 nH
47 nH
18 nH
3.3 nH
0
10
20
30
40
50
60
70
80
90
100
110
120
10 100 1000 10000
Frequency (MHz)
Q Factor
15 nH 3.3 nH
33 nH
150 nH
680 nH
330 nH
-40 -20 020406080100 140120
Ambient temperature (°C)
120
110
100
90
80
70
60
50
40
30
20
10
0
Percent of rated rmsI
25°C
Irms Derating Designer’s Kit C320 contains 10 each of all 5% values
Core material Ceramic
Environmental RoHS compliant, halogen free optional
Terminations RoHS compliant silver-palladium-platinum-glass frit.
Other terminations available at additional cost.
Weight 19.5 – 23.0 mg
Ambient temperature –40°C to +125°C with Irms current, +125°C
to +140°C with derated current
Storage temperature Component: –40°C to +140°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Temperature Coefficient of Inductance (TCL) +25 to +125 ppm/°C
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
One per billion hours / one billion hours, calculated per Telcordia SR-332
Packaging 2000/7″ reel; 7500/13″ reel. Plastic tape: 8 mm wide,
0.3 mm thick, 4 mm pocket spacing, 1.6 mm pocket depth
PCB washing Tested with pure water or alcohol only. For other
solvents, see Doc787_PCB_Washing.pdf
A max B max C max D ref E F G H I J
0.140 0.085 0.060 0.020 0.056 0.020 0.080 0.076 0.040 0.070
3,56 2,16 1,52 0,51 1,42 0,51 2,03 1,93 1,02 1,78
A
B
overall
C
D
Terminal wraparound:
approx 0.015/0,38 both ends
I
I
J
F
F
G
H
Recommended
Land Pattern
E
terminal
Pick and
place
material
Note: Height dimension (C) is before optional solder application. For maximum
height dimension including solder, add 0.006 in / 0,152 mm.