P1ZAA POW-R-BRIK Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com Phase Control Dual Diode Module 985 Amperes/Up to 5000 Volts C L (4 PLACES) G (3 PLACES) TAPPED HOLE X .50 DEEP E - (4 PLACES) (FOR TYP. 1/4-20 SOCKET HD. SCR. & BELLEVILLE SPRING WASHER) MARKING: K1 (CATHODE), A1/K2 (ANODE) / (CATHODE), & A2 (ANODE) AS SHOWN K1 A2 A1/K2 D F B M (3 PLACES) F A PART NUMBER MARKING LOCATION SENSOR (WHITE) LEADS 12.5 0.5 IN. LONG WITH 0.375 IN. LONG STRIPPED ENDS J H CASE ANODIZED PER MIL-A-8625, TYPE II THIS SURFACE MUST BE PROTECTED & NOT DAMAGED CIRCUIT: P1 - DUAL DIODE K1 K A1/K2 SENSOR A2 Outline Drawing and Circuit Diagram Dimensions A B C D E F G H J K L M Inches Millimeters 8.50 215.9 4.33 109.98 3.15 80.01 3.78 96.01 0.328 Dia. 8.33 Dia. 2.340.03 59.40.8 7/16-14 UNC-2B 2.14 54.36 3.15 80.01 3.38 85.85 0.56 14.22 1.12 28.45 All dimensions are 0.02 unless otherwise specified. Voltage Code: Type P1ZAA 03/10 Rev. 1 Wxx Voltage Code Voltage Volts W36 3600 W42 4200 W45 4500 | | W50 5000 Ordering Information: Select the complete thirteen digit module part number from the Element, Special and Voltage Tables below. Example: P1 ZAA DDA 00 W50 is a Dual Diode POW-R-BRIKTM Module with 67mm elements, Rated 985 Ampere, Standard Thermistor and rated at 5000 Volts. Element Code: DDA Special Code: 00 00 - Standard Thermistor XT - No Thermistor AA-ZZ - Special customer unique specifications. Note: For detailed application information on thermistor circuit refer to Rectifier/Thyristor Module Data Book, Page 3. Description: Powerex Dual Diode POW-RBRIKTM Modules are designed for medium and high current applications. POW-R-BRIKTM Modules feature an electrically isolated package that simplifies system packaging, installation and cooling. POW-R-BRIKTM Modules utilize Compression Bonded Encapsulation (CBE) mounting and double side cooling of the semiconductor elements. The P1ZAA uses 67mm diodes. Other standard circuit configurations include SCR/SCR, SCR/Diode and Diode/SCR. Additional circuit configurations, e.g. single element, common cathode, common anode, and special element types, e.g. fast switch SCRs, fast recovery diodes are available. Features: High Inrush Current Capability Electrically Isolated Packaging Internal Copper Contacting Gold Element Contacting Compression Bonded Elements Internal Temperature Sensor Two Sided Cooling High Thermal Mass for Increased Surge and Overload Capability Applications: DC Motor Controls Transportation Systems Battery Supplies Bridge Circuits Resistance Welding Controls Mining Power Centers 1 Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com P1ZAA POW-R-BRIK Phase Control Dual Diode Module 985 Amperes/Up to 5000 Volts Absolute Maximum Ratings, Tj = 25C unless otherwise specified Ratings Symbol P1ZAA Units Junction Temperature Tj -40 to 150 C Storage Temperature Tstg -40 to 125 C Repetitive Peak Forward and Reverse Blocking Voltage VRRM Up to 5000 Volts Non-Repetitive Reverse Blocking Voltage VRSM VRRM +100 Volts IT(RMS) 1320 Amperes IT(avg) 985 Amperes Peak Half-Cycle Surge Current (8.3 ms, 100% VRRM Reapplied) ITSM 24,000 Amperes Peak Half-Cycle Surge Current (10.0 ms, 100% VRRM Reapplied) I2t for Fusing for One Cycle (8.3 ms, 100% VRRM Reapplied) I2t for Fusing for One Cycle (10.0 ms, 100% VRRM Reapplied) ITSM I2t 21,800 2.40 x 106 Amperes A2-sec I2t 2.37 x 106 A2-sec Maximum Electrical Terminal Mounting Torque -- 30 ft-lbs Maximum Mounting Bolt Torque -- 12 ft-lbs Module Weight, Typical -- 19 lbs 8.6 Kg 5000 Vrms RMS Forward Current Average Forward Current (180 Conduction, TC = 80C) Isolation Voltage VISO Electrical Characteristics, Tj = 25C unless otherwise specified Characteristics Symbol Test Conditions Max. Units IDRM/IRRM Tj = 150C 150 mA VTM Tj = 25C, ITM = 3000A 1.45 Volts Threshold Voltage, Low-Level V(TO)1 Tj = 150C, I = 15% IT(avg) to IT(avg) Slope Resistance, Low-Level rT1 Threshold Voltage, High-Level V(TO)2 Slope Resistance, High-Level rT2 Repetitive Peak Forward and Reverse Leakage Current Peak On-State Voltage Tj = 150C, I = 15% IT(avg) to ITSM Tj = 150C, I = 15% IT(avg) to IT(avg) VTM Coefficients, Low-Level 0.964 Volts 0.207 m 1.77 Volts 0.125 m A = 1.983 B = -0.254 C = 6.38 x 10-5 D = 0.02697 Thermal and Mechanical Characteristics, Tj = 25 C unless otherwise specified Characteristics Symbol Test Conditions Max. Units Thermal Resistance, Junction to Case Rth(j-c)Q Per Module, Both Conducting 0.024 C/W Thermal Resistance, Junction to Case Rth(j-c)D Per Diode, Both Conducting 0.048 C/W Thermal Resistance, Rth(c-s) Per Module 0.007 C/W Case to Sink (Lubricated) 2 http://store.iiic.cc/ 03/10 Rev. 1