CURRENT 10.0Amperes VOLTAGE 20 to 60 Volts SBR1020 THRU SBR1060 Features * Plastic Package has Underwriters Laboratory Flammability Classification 94V-0 * Metal silicon junction, majority carrier conduction * Guard ring for overvoltage protection * Low power loss, high efficiency * High current capability, Low forward voltage drop * Single rectifier construction * High surge capability * For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications * High temperature soldering guaranteed : 250/10 seconds, 0.25" (6.35mm) from case TO-220A .108 (2.75) .050 (1.27) .248 (6.3) .595 (15.1) MAX. .040 (1.0) MAX. .550 .158 (14.0) (4.0) MIN. MAX. .051 MAX. (1.3) .040 MAX. (1.0) Mechanical Data PIN 1 * Case : JEDEC TO-220 molded plastic body * Terminals : Lead solderable per MIL-STD-750, Method 2026 * Polarity : As marked * Mounting Position : Any * Weight : 0.08ounce, 2.24 grams .180 3.8 f +.2 HOLE THRU (4.6) .412 (10.5) MAX. + .200 (5.08) PIN 1 + .120 (3.05) + CASE PIN 2 Case Negative Suffix "R" CASE PIN 2 Case Positive Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics (Ratings at 25 ambient temperature unless otherwise specified, single phase, half wave, resistive or inductive load. For capacitive load, derate by 20%) Symbols SBR1020 SBR1030 SBR1040 SBR1050 SBR1060 Units Maximum repetitive peak reverse voltage VRRM 20 30 40 50 60 Volts Maximum RMS voltage VRMS 14 21 28 35 42 Volts Maximum DC blocking Voltage VDC 20 30 40 50 60 Volts Maximum average forward rectified current (see Fig. 1) I(AV) 10.0 Amps Repetitive peak forward current(square wavr, 20KHZ) at Tc=105 IFRM 20.0 Amps Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC method) IFSM 150.0 Amps Maximum instantaneous forward voltage at 10A (Note 1) VF Maximum instantaneous reverse current at rated DC blocking voltage (Note1) IR TA=25 TA=125 Typical thermal resistance (Note 2) Operating junction temperature range Storage temperature range Notes: (1) Pulse test: 300S pulse width, 1% duty cycle (2) Thermal resistance from junction to case 0.70 0.80 Volts 1.0 30 mA RJC 2.5 /W TJ -65 to +150 TSTG -65 to +150 RATINGS AND CHARACTERISTIC CURVES SBR1020 THRU SBR1060 FIG.2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 12 175 10 150 8 PEAK FORWARD SURGE CURRENT (AMPERES) AVERAGE FORWARD CURRENT AMPERES FIG.1-FORWARD CURRENT DERATING CURVE RESISTIVE OR INDUCTIVE LOAD 6 4 SBR1050-SBR1060 - - - SBR1020-SBR1040 2 125 100 75 50 25 0 0 20 40 60 80 100 120 0.1 150 1 100 NUMBER OF CYCLES AT 60Hz LEAD TEMPERATURE () FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG.4-TYPICAL REVERSE CHARACTERISTICS 20 50 10 INSTANTANEOUS REVERSE CURRENT MILL (AMPERES) TJ=125 INSTANTANEOUS FORWARD CURRENT (AMPERES) 10 10 TJ=25 PULSE WIDTH=300 1% DUTY CYCLE 1 0.1 SBR1050-SBR1060 - - - SBR1020-SBR1040 TJ=125 1 TJ=75 0.1 0.01 TJ=25 0.01 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 0.001 SBR1050-SBR1060 - - - SBR1020-SBR1040 0 20 40 60 80 100 INSTANTANEOUS FORWARD VOLTAGE (VOLTS) PERCENT OF RATED PEAK REVERSE VOLTAGE (%) FIG.6-TYPICAL TRANSIENT THERMAL IMPEDANCE FIG.5-TYPICAL JUNCTION CAPACITANCE 100 TRANSIENT THERMAL IMPEDANCE,/ W JUNCTION CAPACITANCE (pF) 4000 TJ=25 f=1.0MHz Vsig=50mVp-p 1000 SBR1050-SBR1060 - - - SBR1020-SBR1040 100 0.1 1 10 REVERSE VOLTAGE. VOLTS 100 10 1 0.1 0.01 0.1 1 T, PULSE DURATION, sec. 10 100