The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Lightweight SMT Miniature Coaxial Connectors - 1.4 mm Mated Height N.FL Series Up to 6 GHz Transmission Speed Occupied Mounting Area 0.8 3 Features 3.1 Mated height comparison (With U.FL-LP(V) ) 1. Low profile Nominal mated height is 1.4 mm (Max. 1.5 mm) 2. Small size: 7.7 mm2 1.4(1.5MAX) Receptacle : 14 mg Plug : 28 mg 1.9(2.0MAX) 3. Light weight 4. Accepts high frequency transmission of DC to 6 GHz. N.FL U.FL-LP(V) V.S.W.R. = 1.3 max. (DC to 6 GHz) 5. Board placement with automatic equipment Receptacles are packaged in embossed carrier tape and reel for automatic mounting. 6. Plugs are terminated with ultra-fine coaxial (fluorinated resin insulated) cable. N.FL Plug and Receptacle 7. Special tool for an extraction 8. RoHS compliant N.FL-LP-040 Plug Applications 3.4 Cable Dia.0.81 1.4(1.5MAX) Cellular phones, PHS, mobile phones, wireless communication devices, electronic measuring instruments, GPS, wireless LAN, Bluetooth and any application requiring high frequency transmission using small coaxial connectors. N.FL-R-SMT-1 Receptacle 2008.6 1 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, orSMT will be Miniature discontinued soon. Please check the products-status on theMated Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. N.FL SeriesLightweight Coaxial Connectors 1.4 mm Height Specifications Nominal characteristic impedance 50 ohms Operating temperature range -40C to +90C (90% RH) DC to 6 GHz Storage temperature range -30C to +70C (90% RH) Ratings Frequency range Item 1. Contact resistance Specification Conditions Center contact: 25 m ohms max. Outer contact: 25 m ohms max. 2. Insulation resistance 10 mA max. 500 M ohms min. 100V DC 3. Withstanding voltage No flashover or insulation breakdown 200V AC / 1 minute 4. V.S.W.R.(Note) 1.3max. DC to 6GHz Contact resistance 5. Durability Center contact: 30 m ohms max. Outer contact: 30 m ohms max. No damage, cracks, or parts dislocation 20 cycles 6. Vibration No electrical discontinuity of 1 s or longer No damage, cracks, or parts dislocation Frequency: 10 to 100 Hz, single amplitude of 1.5 mm Acceleration: 59 m/s2, in each of 3 axis 5 cycles 7. Shock No electrical discontinuity of 1 s or longer No damage, cracks, or parts dislocation Acceleration of 735 m/s2, 11 ms continuous time Waveform: sine half-wave, 3 cycles in each of the 3 axis 8. Humidity Insulation resistance: 100 M ohms min. (high humidity) Insulation resistance: 500 M ohms min. (dry) No damage, cracks, or parts dislocation 96 hours at +40C, and humidity of 95% 9. Temperature cycle No damage, cracks, or parts dislocation Temperature:-40C/+5C to +35C/+90C/+5C to +35C Time: 30 min./ 5 min. max. / 30 min. / 5 min. max. 5 cycles 10. Salt spray test No excessive corrosion 5% salt water solution, 48 hours Note: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a specific part number shown. * V.S.W.R. Measurement System Measured as shown on the block diagram below. Network Analyzer Test Set Test Port D.U.T Termination Note1: A N.FL Cable assembly (plug) is measured with SMA conversion adapters mated with N.FL plugs at both ends of a 100cm coaxial cable harness Note2: A N.FL receptacle, which is mounted on a 50 ohms glass epoxy board, is measured with a SMA conversion adapter. Test Port Cable Materials / Finishes Plug Part Material Finish Remarks Shell Phosphor bronze Silver plated ------- Female center contact Phosphor bronze Gold plated ------- PBT Color: Black UL94V-0 Material Finish Remarks Phosphor bronze Silver plated ------- Insulator Receptacle Part Shell Male center contact Insulator 2 Brass Gold plated ------- LCP Color: Black UL94V-0 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check theN.FL products status on the Hirose website RoHSMiniature search at www.hirose-connectors.com, or contact Hirose sales Height representative. SeriesLightweight SMT Coaxial Connectors - 1.4your mm Mated Receptacle GND GND GND BRecommended PCB mounting pattern No conductive traces in this area 1.85 2 O2 2.05 0.8 0.25 SIG GND SIG 0.6 0.8 1.8 2.6 3.1 1.9 3.8 0.6 2.6 3 Recommended screen thickness: 0.1mm to 0.12mm All dimensions: mm Part Number CL No. Packaging N.FL-R-SMT-1(01) 331-0332-3-01 Bag (100 pieces per bag) N.FL-R-SMT-1(10) 331-0332-3-10 Reel (2,000 pieces per reel) N.FL-R-SMT-1(40) 331-0332-3-40 Reel (5,000 pieces per reel) Weight/EA RoHS 14 mg YES Packaging Specifications Embossed Carrier Tape Dimensions Unreeling direction .5 4 O1 2 0.3 12 5.5 1.75 1 Center contact terminal 8 Reel Dimensions O330 13.5 Reel material: Plastic All dimensions: mm 3 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check products status on the Hirose website RoHS searchCoaxial at www.hirose-connectors.com, or contact your Hirose sales representative. N.FLtheSeriesLightweight SMT Miniature Connectors - 1.4 mm Mated Height 2.8 Plug Assembly (Plug) 1.12 3.4 All dimensions: mm Plugs can be ordered only as terminated cable assemblies. How to Specify Plug Cable Assembly Double-ended cable assembly Single-ended cable assembly L L Ordering Information Standard tolerances for (L) N.FL -- [ ] LP -- 04N [ ] -- A -- (L) 1 1 Series name 2 Assembly type 2 3 4 5 N.FL LP : Single ended 2LP : Double ended 3 Cable type 04N : Dia. 0.81mm ultra-fine coaxial cable 4 Cable color 1: White, 2: Black 5 Total length (mm) Length (L) (L) Standard Tolerance L=35 mm to 200 mm 4 mm (Note 1) L=200 mm to 500 mm 8 mm L=500 mm to 1000 mm 12 mm L= Longer than 1000 mm 1.5% of (L) Note1:Minimum available length (L) is 35mm Note2:Contact nearest HRS representative if different tolerances are required. Note3:Contact Nearest HRS representative if one end requires preparation. Part No. of Cable Assembly Description RoHS N.FL-2LP-04N1-A-(L) Dia. 0.81mm double ended coaxial cable, color: white YES 4 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check products status on the Hirose website RoHS searchCoaxial at www.hirose-connectors.com, or contact your Hirose sales representative. N.FLtheSeriesLightweight SMT Miniature Connectors - 1.4 mm Mated Height Conversion Adapters SMA Conversion Adapter (N.FL / U.FL side jack - SMA side plug) (10.7) 8HEX All dimensions: mm Note: The U.FL side mating portions has a lower lock retention force than the regular product, therefore, cannot be used for purposes other than performance measurements. Part Number CL No. RoHS HRMP-U.FLJ(40) 311-0301-5-40 YES SMA Conversion Adapter (N.FL / U.FL side plug - SMA side jack) 14.05 (4.05) 5.6 O6.35 6 1/4-36UNS-2A All dimensions: mm Note: The U.FL side mating portions has a lower lock retention force than the regular product, therefore, cannot be used for purposes other than performance measurements. Part Number CL No. RoHS HRMJ-U.FLP(40) 311-0300-2-40 YES SMA Conversion Adapter (18.3) (4) 5.5 O6.35 6 1/4-36UNS-2A All dimensions: mm Note: When mating with corresponding part (N.FL-SMT1) must be pressed down and held to make complete connection. Part Number CL No. RoHS HRMJ-N.FLP-ST5 311-0423-2 YES Plug extraction tool 3 50 O15 90 This jig is used for extraction from a mating condition. 2.1 U. FL/ All dimensions: mm Part Number CL No. RoHS U.FL-LP(V)-N-2 331-0493-2 YES 5 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, orSMT will be Miniature discontinued soon. Please check the products-status on theMated Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. N.FL SeriesLightweight Coaxial Connectors 1.4 mm Height Usage Precautions 1. Plug * Unmating Insert the end of an extraction tool into a space between a plug and receptacle, and pull up the tool in the perpendicular to a mounting surface of a receptacle, as shown in the figure. Recomended the use of the extraction tool for unmating. U.FL-LP(V)-N-2 Any attempt of unmating by pulling on the cable may result in Extraction tool N.FL-LP-040 Plug damage to the mechanical / electrical performance. * Mating Do not attempt to insert on an extreme angle. (1) Mating / unmating N.FL-R-SMT-1 Receptacle (2) Pull forces on the cable after connectors are mated N.FL-LP-040 Plug 2.9N max. Do NOT apply any pull forces after the bending of the cable. N.FL-R-SMT-1 Receptacle (3) Precautions Do not twist connectors excessively during mating / unmating. 2. Receptacle 250 c max. for 10 seconds [c] 260 240 220 200 180 160 140 120 100 80 (1) Recommended reflow temperature profile Preheat (130 to 180c) 120 seconds max. 230c 220c 50 seconds max. 60 seconds max. Time q The temperature profile indicates the board surface temperature at the point of contacts with the connector leads. w In individual applications the actual temperature may vary, depending on the solder paste type, volume / thickness and board size / thickness. Consult your solder paste and equipment manufacturer for the detailed recommendations. (2) Manual soldering Soldering iron temperature: 350C, Soldering time: for 5 seconds max. (3) Recommended metal mask thickness 0.1 mm to 0.12 mm (4) Reflow cycles 2 times 3. Operating environment and storage conditions (1) Operating environment The connectors are NOT designed to operate in the following environments: * Exposed to a excessive amounts of fine particles and dust * Regions and places having a high density of sulfur dioxide, hydrogen sulfide, nitrogen dioxide or other corrosive gasses. * Environments having large rapid variations in temperature. (2) Storage conditions Receptacle Store in the Hirose Electric packaging. Temperature: -10 to +40c, Humidity: 85% max. Use within 6 months of delivery. Receptacles for which the storage period has elapsed must be tested for solderability to the PC board mounting surface. (R) 6 5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN PHONE: 81-3-3491-9741, FAX: 81-3-3493-2933 http://www.hirose.com http://www.hirose-connectors.com The contents of this catalog are current as of date of 06/2008. Contents are subject to change without notice for the purpose of improvements.