HRMJ-N.FLP-ST5 - HIROSE Electric U.S.A., Inc.

1

Lightweight SMT Miniature Coaxial Connectors – 1.4 mm Mated Height

N.FL Series

2008.6

■Features

1.

Low profile

Nominal mated height is 1.4 mm (Max. 1.5 mm)

2. Small size: 7.7 mm2

3. Light weight

Receptacle : 14 mg

Plug : 28 mg

4. Accepts high frequency transmission of DC

to 6 GHz.

V.S.W.R. = 1.3 max. (DC to 6 GHz)

5. Board placement with automatic equipment

Receptacles are packaged in embossed carrier tape and

reel for automatic mounting.

6. Plugs are terminated with ultra-fine coaxial

(fluorinated resin insulated) cable.

7. Special tool for an extraction

8. RoHS compliant

■Applications

Cellular phones, PHS, mobile phones, wireless

communication devices, electronic measuring instruments,

GPS, wireless LAN, Bluetooth and any application requiring

high frequency transmission using small coaxial connectors.

Up to 6 GHz Transmission Speed

0.8

33.1

3.4

Dia.0.81

N.FL-LP-040

Cable

N.FL-R-SMT-1

1.4(1.5MAX)

Plug

Receptacle

●Occupied Mounting Area

1.4(1.5MAX)

1.9(2.0MAX)

N.FL U.FL-LP(V)

●Mated height comparison (With U.FL-LP(V) )

●N.FL Plug and Receptacle

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

2

N.FL Series●Lightweight SMT Miniature Coaxial Connectors – 1.4 mm Mated Height

■Specifications

Item Specification Conditions

1. Contact resistance 10 mA max.

2. Insulation resistance 500 M ohms min. 100V DC

3. Withstanding voltage No flashover or insulation breakdown 200V AC / 1 minute

4. V.S.W.R.(Note) 1.3max. DC to 6GHz

5. Durability 20 cycles

6. Vibration

7. Shock

8. Humidity 96 hours at +40°C, and humidity of 95%

9. Temperature cycle No damage, cracks, or parts dislocation

10. Salt spray test No excessive corrosion 5% salt water solution, 48 hours

Acceleration of 735 m/s2, 11 ms continuous time

Waveform: sine half-wave, 3 cycles in each of the

3 axis

Temperature:-40°C/+5°C to +35°C/+90°C/+5°C to +35°C

Time: 30 min./5 min. max. /30 min. /5 min. max.

5 cycles

Frequency: 10 to 100 Hz, single amplitude of 1.5 mm

Acceleration: 59 m/s

2

, in each of 3 axis

5 cycles

Contact resistance

Center contact: 30 m ohms max.

Outer contact: 30 m ohms max.

No damage, cracks, or parts dislocation

No electrical discontinuity of 1 μs or longer

No damage, cracks, or parts dislocation

No electrical discontinuity of 1 μs or longer

No damage, cracks, or parts dislocation

Insulation resistance: 100 M ohms min. (high humidity)

Insulation resistance: 500 M ohms min. (dry)

No damage, cracks, or parts dislocation

Center contact: 25 m ohms max.

Outer contact: 25 m ohms max.

Nominal characteristic impedance

Frequency range

50 ohms

DC to 6 GHz

Operating temperature range

Storage temperature range

-40°C to +90°C (90% RH)

-30°C to +70°C (90% RH)

Ratings

Note: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a

specific part number shown.

* V.S.W.R. Measurement System

Measured as shown on the block diagram below.

■Materials / Finishes

Note1: A N.FL Cable assembly (plug) is measured with SMA conversion

adapters mated with N.FL plugs at both ends of a 100cm coaxial cable

harness

Note2: A N.FL receptacle, which is mounted on a 50 ohms glass epoxy board,

is measured with a SMA conversion adapter.

Network Analyzer

Test Set

Test Port

TerminationD.U.T

Test Port Cable

Shell Phosphor bronze Silver plated -------

Female center contact Phosphor bronze Gold plated -------

Insulator PBT Color: Black UL94V-0

Part Material Finish Remarks

●

Plug

●

Receptacle

Shell Phosphor bronze Silver plated -------

Male center contact Brass Gold plated -------

Insulator LCP Color: Black UL94V-0

Part Material Finish Remarks

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

3

N.FL Series●Lightweight SMT Miniature Coaxial Connectors – 1.4 mm Mated Height

■Receptacle

14 mg YES

Weight/EA RoHSPackaging

Bag (100 pieces per bag)

Reel (2,000 pieces per reel)

Reel (5,000 pieces per reel)

Part Number CL No.

N.FL-R-SMT-1(01)

N.FL-R-SMT-1(10)

N.FL-R-SMT-1(40)

331-0332-3-01

331-0332-3-10

331-0332-3-40

B

Recommended PCB

mounting pattern

GND

SIG

Ø2

0.6

1.8

2.6

3.1

0.6

2.6

3

0.25

0.8

No conductive

traces in this area GND

SIG

0.8

1.9

3.8

1.85

2

2.05

All dimensions: mm

●Packaging Specifications

Unreeling direction

2

8

1.755.5

12

4

Ø1.5

Center contact terminal 0.3

1

Embossed Carrier Tape Dimensions

Reel Dimensions

All dimensions: mm

Recommended screen thickness: 0.1mm to 0.12mm

Reel material: Plastic

Ø330

13.5

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

N.FL Series●Lightweight SMT Miniature Coaxial Connectors – 1.4 mm Mated Height

4

■Plug Assembly (Plug)

Plugs can be ordered only as terminated cable assemblies.

2.8

3.4

1.12

■How to Specify Plug Cable Assembly

●Ordering Information ●Standard tolerances for (L)

-- -- -- -- (L)A[ ] 04N[ ] LPN.FL

1 2 3 4 5

Series name N.FL

Assembly type LP : Single ended

2LP : Double ended

Cable type 04N : Dia. 0.81mm ultra-fine coaxial cable

Cable color 1: White, 2: Black

Total length (mm) Length (L)

1

2

3

4

5

(L) Standard Tolerance

L=35 mm to 200 mm ±4 mm (Note 1)

L=200 mm to 500 mm ±8 mm

L=500 mm to 1000 mm ±12 mm

L= Longer than 1000 mm ±1.5% of (L)

Note1:Minimum available length (L) is 35mm

Note2:Contact nearest HRS representative if different

tolerances are required.

Note3:Contact Nearest HRS representative if one end

requires preparation.

DescriptionPart No. of Cable Assembly

N.FL-2LP-04N1-A-(L) Dia. 0.81mm double ended coaxial cable, color: white

Single-ended cable assembly

L

Double-ended cable assembly

L

All dimensions: mm

RoHS

YES

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

5

N.FL Series●Lightweight SMT Miniature Coaxial Connectors – 1.4 mm Mated Height

■Conversion Adapters

●SMA Conversion Adapter

Note: When mating with corresponding part (N.FL-SMT-

1) must be pressed down and held to make

complete connection.

Part Number

HRMJ-N.FLP-ST5

CL No. RoHS

YES311-0423-2

Part Number

HRMP-U.FLJ(40)

CL No. RoHS

YES

311-0301-5-40

Part Number

HRMJ-U.FLP(40)

CL No. RoHS

YES

311-0300-2-40

All dimensions: mm

(18.3)

Ø6.35

5.5

6

1/4-36UNS-2A

(4)

This jig is used for extraction from a mating condition.

U. FL/

90

50

3

2.1

Ø15

All dimensions: mm

Part Number

U.FL-LP(V)-N-2

RoHS

YES

CL No.

331-0493-2

■Plug extraction tool

●SMA Conversion Adapter

(N.FL / U.FL side plug - SMA side jack)

Note:

The U.FL side mating portions has a lower lock

retention force than the regular product, therefore,

cannot be used for purposes other than performance

measurements.

14.05

Ø6.35

1/4-36UNS-2A

6 5.6(4.05)

●SMA Conversion Adapter

(N.FL / U.FL side jack - SMA side plug)

Note:

The U.FL side mating portions has a lower lock

retention force than the regular product, therefore,

cannot be used for purposes other than performance

measurements.

(10.7) 8HEX

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

6

N.FL Series●Lightweight SMT Miniature Coaxial Connectors – 1.4 mm Mated Height

1. Plug

■Usage Precautions

U.FL-LP(V)-N-2

Extraction tool N.FL-LP-040

Plug

N.FL-R-SMT-1

Receptacle

(1) Mating / unmating

(2) Pull forces on the

cable after connectors

are mated

(3) Precautions

• Unmating Insert the end of an extraction tool into a space between a plug and receptacle, and pull up the tool in the

perpendicular to a mounting surface of a receptacle, as shown in the figure.

●Recomended the use of the extraction tool for unmating.

Any attempt of unmating by pulling on the cable may result in

damage to the mechanical / electrical performance.

• Mating Do not attempt to insert on an extreme angle.

Do not twist connectors excessively during mating / unmating.

N.FL-LP-040

Plug 2.9N max.

N.FL-R-SMT-1

Receptacle

Do NOT apply any pull forces after the

bending of the cable.

2. Receptacle

(1) Recommended reflow

temperature profile

qThe temperature profile indicates the board surface temperature at the point of contacts with the connector leads.

wIn individual applications the actual temperature may vary, depending on the solder paste type, volume / thickness and

board size / thickness. Consult your solder paste and equipment manufacturer for the detailed recommendations.

Soldering iron temperature: 350°C, Soldering time: for 5 seconds max.(2) Manual soldering

(3) Recommended metal

mask thickness 0.1 mm to 0.12 mm

(4) Reflow cycles 2 times

80

100

120

140

160

180

200

220

240

260

[ç]

Preheat

(130 to 180ç)

230ç

220ç

50 seconds max.120 seconds max.

60 seconds max.

Time

250 ç max. for

10 seconds

The contents of this catalog are current as of date of 06/2008. Contents are subject to change without notice for the purpose of improvements.

5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN

PHONE: 81-3-3491-9741, FAX: 81-3-3493-2933

http://www.hirose.com

http://www.hirose-connectors.com

®

(1) Operating environment

The connectors are NOT designed to operate in the following environments:

•Exposed to a excessive amounts of fine particles and dust

•Regions and places having a high density of sulfur dioxide, hydrogen sulfide, nitrogen dioxide or other corrosive gasses.

•Environments having large rapid variations in temperature.

(2) Storage conditions -

Receptacle

Store in the Hirose Electric packaging.

Temperature: -10 to +40ç, Humidity: 85% max.

Use within 6 months of delivery.

Receptacles for which the storage period has elapsed must be tested for solderability to the PC board mounting surface.

3. Operating environment and storage conditions

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.