MITSUBISHI SEMICONDUCTOR TRIAC BCR5AM Refer to the page 6 as to the product guaranteed maximum junction temperature 150C MEDIUM POWER USE NON-INSULATED TYPE, PLANAR PASSIVATION TYPE BCR5AM OUTLINE DRAWING Dimensions in mm 3.20.2 4.5 1.3 4 7.0 16 MAX 10.5 MAX TYPE NAME VOLTAGE CLASS 3.60.2 12.5 MIN 3.8 MAX 1.0 0.8 2.5 0.5 2.6 4.5 2.5 123 Measurement point of case temperature 24 * IT (RMS) ........................................................................ 5A * VDRM ....................................................................... 600V * IFGT !, IRGT !, IRGT # .......................... 20mA (10mA) 6 1 1 2 33 4 T1 TERMINAL T2 TERMINAL GATE TERMINAL T2 TERMINAL TO-220 APPLICATION Switching mode power supply, light dimmer, electric flasher unit, control of household equipment such as TV sets * stereo * refrigerator * washing machine * infrared kotatsu * carpet, solenoid drivers, small motor control, copying machine, electric tool, other general purpose control applications MAXIMUM RATINGS Symbol Voltage class Parameter Unit 12 VDRM Repetitive peak off-state voltage 1 600 V VDSM Non-repetitive peak off-state voltage 1 720 V Symbol Parameter Conditions Ratings Unit IT (RMS) RMS on-state current Commercial frequency, sine full wave 360 conduction, Tc=103C 3 ITSM Surge on-state current 60Hz sinewave 1 full cycle, peak value, non-repetitive I2t I2t for fusing Value corresponding to 1 cycle of half wave 60Hz, surge on-state current PGM Peak gate power dissipation 3 W PG (AV) Average gate power dissipation 0.3 W VGM Peak gate voltage 10 V IGM Peak gate current 2 Tj Junction temperature Tstg Storage temperature -- Weight Typical value 5 A 50 A 10.4 A2s A -40 ~ +125 C -40 ~ +125 C 2.0 g 1. Gate open. Mar. 2002 MITSUBISHI SEMICONDUCTOR TRIAC BCR5AM MEDIUM POWER USE Refer to the page 6 as to the product guaranteed maximum junction temperature 150C NON-INSULATED TYPE, PLANAR PASSIVATION TYPE ELECTRICAL CHARACTERISTICS Limits Symbol Parameter Test conditions Min. Typ. Max. Unit IDRM Repetitive peak off-state current Tj=125C, VDRM applied -- -- 2.0 mA VTM On-state voltage Tc=25C, ITM=7A, Instantaneous measurement -- -- 1.8 V -- -- 1.5 V -- -- 1.5 V ! VFGT ! VRGT ! Gate trigger voltage 2 @ Tj=25C, VD=6V, RL=6, RG=330 VRGT # # -- -- 1.5 IFGT ! ! -- -- 20 6 mA -- -- 20 6 mA -- -- 20 6 mA IRGT ! Gate trigger current 2 @ Tj=25C, VD=6V, RL=6, RG=330 # IRGT # V VGD Gate non-trigger voltage Tj=125C, VD=1/2VDRM 0.2 -- -- V Rth (j-c) Thermal resistance Junction to case 3 4 -- -- 3.0 C/ W (dv/dt)c Critical-rate of rise of off-state commutating voltage Tj=125C 5 -- -- V/s 5 2. Measurement using the gate trigger characteristics measurement circuit. 3. Case temperature is measured at the T2 terminal 1.5mm away from the molded case. 4. The contact thermal resistance Rth (c-f) in case of greasing is 1.0C/W. 5. Test conditions of the critical-rate of rise of off-state commutating voltage is shown in he table below. 6. High sensitivity (IGT10mA) is also available. (IGT item 1) Commutating voltage and current waveforms (inductive load) Test conditions SUPPLY VOLTAGE 1. Junction temperature Tj=125C 2. Rate of decay of on-state commutating current (di/dt)c=-2.5A/ms MAIN CURRENT TIME (di/dt)c TIME MAIN VOLTAGE 3. Peak off-state voltage VD=400V TIME (dv/dt)c VD PERFORMANCE CURVES RATED SURGE ON-STATE CURRENT MAXIMUM ON-STATE CHARACTERISTICS 100 7 5 3 2 101 7 5 3 2 100 7 5 3 2 Tj = 125C Tj = 25C 10-1 0.6 1.0 1.4 1.8 2.2 2.6 3.0 3.4 3.8 4.2 4.6 ON-STATE VOLTAGE (V) SURGE ON-STATE CURRENT (A) ON-STATE CURRENT (A) 102 90 80 70 60 50 40 30 20 10 0 100 2 3 4 5 7 101 2 3 4 5 7 102 CONDUCTION TIME (CYCLES AT 60Hz) Mar. 2002 MITSUBISHI SEMICONDUCTOR TRIAC BCR5AM MEDIUM POWER USE Refer to the page 6 as to the product guaranteed maximum junction temperature 150C NON-INSULATED TYPE, PLANAR PASSIVATION TYPE 100 (%) GATE TRIGGER CURRENT VS. JUNCTION TEMPERATURE 102 7 5 3 2 VGM = 10V 101 7 5 PGM = 0.3W 3 VGT = 1.5V 2 Tj = 25C 100 7 IGT = 20mA 5 PGM = 3W IGM = 2A 3 2 VGD = 0.2V 10-1 101 2 3 5 7 102 2 3 5 7 103 2 3 5 7 104 GATE TRIGGER CURRENT (Tj = tC) GATE TRIGGER CURRENT (Tj = 25C) GATE VOLTAGE (V) GATE CHARACTERISTICS (, AND ) 103 7 5 4 3 2 101 -60 -40 -20 0 20 40 60 80 100 120 140 MAXIMUM TRANSIENT THERMAL IMPEDANCE CHARACTERISTICS (JUNCTION TO CASE) 101 -60 -40 -20 0 20 40 60 80 100 120 140 TRANSIENT THERMAL IMPEDANCE (C/W) 102 7 5 4 3 2 102 2 3 5 7 103 2 3 5 4.0 3.6 3.2 2.8 2.4 2.0 1.6 1.2 0.8 0.4 0 10-1 2 3 5 7 100 2 3 5 7 101 2 3 5 7 102 JUNCTION TEMPERATURE (C) CONDUCTION TIME (CYCLES AT 60Hz) MAXIMUM ON-STATE POWER DISSIPATION ALLOWABLE CASE TEMPERATURE VS. RMS ON-STATE CURRENT 8 160 7 140 CASE TEMPERATURE (C) 100 (%) GATE TRIGGER VOLTAGE (Tj = tC) GATE TRIGGER VOLTAGE (Tj = 25C) ON-STATE POWER DISSIPATION (W) TYPICAL EXAMPLE 6 360 CONDUCTION 5 RESISTIVE, INDUCTIVE 4 LOADS 3 2 1 0 IRGT I JUNCTION TEMPERATURE (C) GATE TRIGGER VOLTAGE VS. JUNCTION TEMPERATURE 0 IRGT III 102 IFGT I 7 5 4 3 2 GATE CURRENT (mA) 103 7 5 4 3 2 TYPICAL EXAMPLE 1 2 3 4 5 6 7 RMS ON-STATE CURRENT (A) 8 CURVES APPLY REGARDLESS OF CONDUCTION ANGLE 120 100 80 60 360 40 CONDUCTION RESISTIVE, 20 INDUCTIVE LOADS 0 0 1 2 3 4 5 6 7 8 RMS ON-STATE CURRENT (A) Mar. 2002 MITSUBISHI SEMICONDUCTOR TRIAC BCR5AM 120 100 100 t2.3 100 60 60 t2.3 80 60 NATURAL 40 CONVECTION RESISTIVE, CURVES APPLY 20 REGARDLESS OF INDUCTIVE CONDUCTION ANGLE LOADS 0 0 8 1 2 3 4 5 6 7 40 20 0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 REPETITIVE PEAK OFF-STATE CURRENT VS. JUNCTION TEMPERATURE HOLDING CURRENT VS. JUNCTION TEMPERATURE HOLDING CURRENT (mA) 103 7 5 3 2 102 7 5 4 3 2 VD = 12V DISTRIBUTION TYPICAL EXAMPLE 101 7 5 4 3 2 100 -60 -40 -20 0 20 40 60 80 100 120 140 102 -60 -40 -20 0 20 40 60 80 100 120 140 7 5 3 2 60 RMS ON-STATE CURRENT (A) 104 7 5 3 2 102 80 RMS ON-STATE CURRENT (A) 105 7 TYPICAL EXAMPLE 5 3 2 JUNCTION TEMPERATURE (C) JUNCTION TEMPERATURE (C) LACHING CURRENT VS. JUNCTION TEMPERATURE BREAKOVER VOLTAGE VS. JUNCTION TEMPERATURE T2+, G+ TYPICAL T2- , G- EXAMPLE DISTRIBUTION T2+, G- TYPICAL EXAMPLE 101 7 5 3 2 100 100 (%) 103 7 5 3 2 ALLOWABLE AMBIENT TEMPERATURE VS. RMS ON-STATE CURRENT 160 NATURAL CONVECTION NO FINS 140 CURVES APPLY REGARDLESS OF CONDUCTION ANGLE 120 RESISTIVE, INDUCTIVE LOADS 100 0 BREAKOVER VOLTAGE (Tj = tC) BREAKOVER VOLTAGE (Tj = 25C) REPETITIVE PEAK OFF-STATE CURRENT (Tj = tC) REPETITIVE PEAK OFF-STATE CURRENT (Tj = 25C) LACHING CURRENT (mA) 120 120 t2.3 MEDIUM POWER USE NON-INSULATED TYPE, PLANAR PASSIVATION TYPE AMBIENT TEMPERATURE (C) ALLOWABLE AMBIENT TEMPERATURE VS. RMS ON-STATE CURRENT 160 ALL FINS ARE BLACK PAINTED ALUMINUM AND GREASED 140 100 (%) AMBIENT TEMPERATURE (C) Refer to the page 6 as to the product guaranteed maximum junction temperature 150C 160 TYPICAL EXAMPLE 140 120 100 80 60 40 20 -60 -40 -20 0 20 40 60 80 100 120 140 0 -60 -40 -20 0 20 40 60 80 100120 140 JUNCTION TEMPERATURE (C) JUNCTION TEMPERATURE (C) Mar. 2002 MITSUBISHI SEMICONDUCTOR TRIAC BCR5AM BREAKOVER VOLTAGE VS. RATE OF RISE OF OFF-STATE VOLTAGE 160 TYPICAL EXAMPLE Tj = 125C BREAKOVER VOLTAGE (dv/dt = xV/s ) BREAKOVER VOLTAGE (dv/dt = 1V/s ) 140 120 III QUADRANT 100 80 60 I QUADRANT 40 20 0 101 2 3 5 7 102 2 3 5 7 103 2 3 5 7 104 MEDIUM POWER USE NON-INSULATED TYPE, PLANAR PASSIVATION TYPE CRITICAL RATE OF RISE OF OFF-STATE COMMUTATING VOLTAGE (V/s) 100 (%) Refer to the page 6 as to the product guaranteed maximum junction temperature 150C COMMUTATION CHARACTERISTICS 7 5 4 3 2 100 (%) GATE TRIGGER CURRENT (tw) GATE TRIGGER CURRENT (DC) 103 7 5 4 3 2 MAIN VOLTAGE (dv/dt)c 100 7 0 10 TIME VD I QUADRANT MINIMUM CHARACTERISTICS VALUE III QUADRANT 2 3 4 5 7 101 2 3 4 5 7 102 RATE OF DECAY OF ON-STATE COMMUTATING CURRENT (A/ms) GATE TRIGGER CHARACTERISTICS TEST CIRCUITS 6 6 TYPICAL EXAMPLE IRGT III A 6V IRGT I 102 7 5 4 3 2 TEST PROCEDURE 1 IFGT I A 6V RG V V RG TEST PROCEDURE 2 6 A 6V 101 TYPICAL EXAMPLE Tj = 125C IT = 4A = 500s VD = 200V f = 3Hz TIME (di/dt)c TIME MAIN CURRENT 101 7 5 4 3 2 RATE OF RISE OF OFF-STATE VOLTAGE (V/s) GATE TRIGGER CURRENT VS. GATE CURRENT PULSE WIDTH SUPPLY VOLTAGE 100 2 3 4 5 7 101 2 3 4 5 7 102 GATE CURRENT PULSE WIDTH (s) V RG TEST PROCEDURE 3 Mar. 2002 MITSUBISHI SEMICONDUCTOR TRIAC BCR5AM The product guaranteed maximum junction temperature 150C (See warning.) MEDIUM POWER USE NON-INSULATED TYPE, PLANAR PASSIVATION TYPE BCR5AM OUTLINE DRAWING Dimensions in mm 3.20.2 4.5 1.3 4 7.0 16 MAX 10.5 MAX TYPE NAME VOLTAGE CLASS 3.60.2 12.5 MIN 3.8 MAX 1.0 0.8 2.5 0.5 2.6 4.5 2.5 123 Measurement point of case temperature 24 * IT (RMS) ........................................................................ 5A * VDRM ....................................................................... 600V * IFGT !, IRGT !, IRGT # .......................... 20mA (10mA) 6 1 1 2 33 4 T1 TERMINAL T2 TERMINAL GATE TERMINAL T2 TERMINAL TO-220 APPLICATION Switching mode power supply, light dimmer, electric flasher unit, control of household equipment such as TV sets * stereo * refrigerator * washing machine * infrared kotatsu * carpet, solenoid drivers, small motor control, copying machine, electric tool, other general purpose control applications (Warning) 1. Refer to the recommended circuit values around the triac before using. 2. Be sure to exchange the specification before using. If not exchanged, general triacs will be supplied. MAXIMUM RATINGS Symbol Voltage class Parameter Unit 12 VDRM Repetitive peak off-state voltage 1 600 V VDSM Non-repetitive peak off-state voltage 1 720 V Symbol Parameter Conditions Ratings Unit IT (RMS) RMS on-state current Commercial frequency, sine full wave 360 conduction, Tc=128C 3 ITSM Surge on-state current 60Hz sinewave 1 full cycle, peak value, non-repetitive I2t I2t for fusing Value corresponding to 1 cycle of half wave 60Hz, surge on-state current PGM Peak gate power dissipation 3 W PG (AV) Average gate power dissipation 0.3 W VGM Peak gate voltage 10 V IGM Peak gate current 2 Tj Junction temperature Tstg Storage temperature -- Weight Typical value 5 A 50 A 10.4 A2s A -40 ~ +150 C -40 ~ +150 C 2.0 g 1. Gate open. Mar. 2002 MITSUBISHI SEMICONDUCTOR TRIAC BCR5AM MEDIUM POWER USE The product guaranteed maximum junction temperature 150C (See warning.) NON-INSULATED TYPE, PLANAR PASSIVATION TYPE ELECTRICAL CHARACTERISTICS Limits Symbol Parameter Test conditions Min. Typ. Max. Unit IDRM Repetitive peak off-state current Tj=150C, VDRM applied -- -- 2.0 mA VTM On-state voltage Tc=25C, ITM=7A, Instantaneous measurement -- -- 1.8 V -- -- 1.5 V -- -- 1.5 V ! VFGT ! VRGT ! Gate trigger voltage 2 @ Tj=25C, VD=6V, RL=6, RG=330 VRGT # # -- -- 1.5 IFGT ! ! -- -- 20 6 mA -- -- 20 6 mA -- -- 20 6 mA 0.2/0.1 -- -- V IRGT ! Gate trigger current 2 @ Tj=25C, VD=6V, RL=6, RG=330 # IRGT # V VGD Gate non-trigger voltage Tj=125C/150C, VD=1/2VDRM Rth (j-c) Thermal resistance Junction to case 3 4 -- -- 3.0 C/ W (dv/dt)c Critical-rate of rise of off-state commutating voltage Tj=125C/150C 5/1 -- -- V/s 5 2. Measurement using the gate trigger characteristics measurement circuit. 3. Case temperature is measured at the T2 terminal 1.5mm away from the molded case. 4. The contact thermal resistance Rth (c-f) in case of greasing is 1.0C/W. 5. Test conditions of the critical-rate of rise of off-state commutating voltage is shown in the table below. 6. High sensitivity (IGT10mA) is also available. (IGT item 1) Commutating voltage and current waveforms (inductive load) Test conditions SUPPLY VOLTAGE 1. Junction temperature Tj=125C/150C MAIN CURRENT 2. Rate of decay of on-state commutating current (di/dt)c=-2.5A/ms TIME (di/dt)c TIME MAIN VOLTAGE 3. Peak off-state voltage VD=400V TIME (dv/dt)c VD PERFORMANCE CURVES RATED SURGE ON-STATE CURRENT MAXIMUM ON-STATE CHARACTERISTICS 102 100 SURGE ON-STATE CURRENT (A) ON-STATE CURRENT (A) 7 5 3 2 101 Tj = 150C 7 5 3 2 100 7 5 3 2 10-1 0.5 Tj = 25C 1.0 1.5 2.0 2.5 3.0 3.5 ON-STATE VOLTAGE (V) 4.0 90 80 70 60 50 40 30 20 10 0 100 2 3 4 5 7 101 2 3 4 5 7 102 CONDUCTION TIME (CYCLES AT 60Hz) Mar. 2002 MITSUBISHI SEMICONDUCTOR TRIAC BCR5AM MEDIUM POWER USE The product guaranteed maximum junction temperature 150C (See warning.) NON-INSULATED TYPE, PLANAR PASSIVATION TYPE GATE CHARACTERISTICS (, AND ) GATE VOLTAGE (V) 5 3 2 VGM = 10V 101 7 5 PGM = 0.3W 3 VGT = 1.5V 2 Tj = 25C 100 7 IGT = 20mA 5 PGM = 3W IGM = 2A 3 2 10-1 7 VGD = 0.1V 5 100 2 3 5 7 101 2 3 5 7 102 2 3 5 7 103 GATE TRIGGER CURRENT (Tj = tC) GATE TRIGGER CURRENT (Tj = 25C) 100 (%) GATE TRIGGER CURRENT VS. JUNCTION TEMPERATURE 103 7 5 3 2 7 5 3 2 101 -60 -40 -20 0 20 40 60 80 100 120 140 160 TRANSIENT THERMAL IMPEDANCE (C/W) 102 7 5 4 3 2 7 5 3 2 100 -60 -40 -20 0 20 40 60 80 100 120 140 160 102 2 3 5 7 103 2 3 5 4.0 3.6 3.2 2.8 2.4 2.0 1.6 1.2 0.8 0.4 0 10-1 2 3 5 7 100 2 3 5 7 101 2 3 5 7 102 JUNCTION TEMPERATURE (C) CONDUCTION TIME (CYCLES AT 60Hz) MAXIMUM ON-STATE POWER DISSIPATION ALLOWABLE CASE TEMPERATURE VS. RMS ON-STATE CURRENT 8 160 7 140 CASE TEMPERATURE (C) 100 (%) GATE TRIGGER VOLTAGE (Tj = tC) GATE TRIGGER VOLTAGE (Tj = 25C) ON-STATE POWER DISSIPATION (W) IFGT I 101 MAXIMUM TRANSIENT THERMAL IMPEDANCE CHARACTERISTICS (JUNCTION TO CASE) TYPICAL EXAMPLE 6 360 CONDUCTION 5 RESISTIVE, INDUCTIVE 4 LOADS 3 2 1 0 IRGT I JUNCTION TEMPERATURE (C) GATE TRIGGER VOLTAGE VS. JUNCTION TEMPERATURE 0 IRGT III 102 GATE CURRENT (mA) 103 7 5 4 3 2 TYPICAL EXAMPLE 1 2 3 4 5 6 7 RMS ON-STATE CURRENT (A) 8 CURVES APPLY REGARDLESS OF CONDUCTION ANGLE 120 100 80 60 360 40 CONDUCTION RESISTIVE, 20 INDUCTIVE LOADS 0 0 1 2 3 4 5 6 7 8 RMS ON-STATE CURRENT (A) Mar. 2002 MITSUBISHI SEMICONDUCTOR TRIAC BCR5AM MEDIUM POWER USE 60 NATURAL 40 CONVECTION RESISTIVE, CURVES APPLY 20 REGARDLESS OF INDUCTIVE CONDUCTION ANGLE LOADS 0 1 2 3 4 5 6 7 0 8 AMBIENT TEMPERATURE (C) NON-INSULATED TYPE, PLANAR PASSIVATION TYPE ALLOWABLE AMBIENT TEMPERATURE VS. RMS ON-STATE CURRENT 160 ALL FINS ARE BLACK PAINTED ALUMINUM AND GREASED 140 120 120 t2.3 120 100 100 t2.3 100 60 60 t2.3 80 100 (%) AMBIENT TEMPERATURE (C) The product guaranteed maximum junction temperature 150C (See warning.) HOLDING CURRENT (mA) TYPICAL EXAMPLE 103 7 5 3 2 102 -60 -40 -20 0 20 40 60 80 100 120 140 160 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 102 7 5 4 3 2 VD = 12V DISTRIBUTION TYPICAL EXAMPLE 101 7 5 4 3 2 100 -60 -40 -20 0 20 40 60 80 100 120 140 160 JUNCTION TEMPERATURE (C) LACHING CURRENT VS. JUNCTION TEMPERATURE BREAKOVER VOLTAGE VS. JUNCTION TEMPERATURE T2+, G+ TYPICAL T2- , G- EXAMPLE DISTRIBUTION T2+, G- TYPICAL EXAMPLE 101 7 5 3 2 100 -60 -40 -20 0 20 40 60 80 100 120 140 160 JUNCTION TEMPERATURE (C) 100 (%) JUNCTION TEMPERATURE (C) BREAKOVER VOLTAGE (Tj = tC) BREAKOVER VOLTAGE (Tj = 25C) REPETITIVE PEAK OFF-STATE CURRENT (Tj = tC) REPETITIVE PEAK OFF-STATE CURRENT (Tj = 25C) LACHING CURRENT (mA) 0 HOLDING CURRENT VS. JUNCTION TEMPERATURE 7 5 3 2 7 5 3 2 20 REPETITIVE PEAK OFF-STATE CURRENT VS. JUNCTION TEMPERATURE 104 102 40 RMS ON-STATE CURRENT (A) 7 5 3 2 7 5 3 2 60 RMS ON-STATE CURRENT (A) 105 103 80 0 106 7 5 3 2 ALLOWABLE AMBIENT TEMPERATURE VS. RMS ON-STATE CURRENT 160 NATURAL CONVECTION NO FINS, CURVES 140 APPLY REGARDLESS 120 OF CONDUCTION ANGLE RESISTIVE, INDUCTIVE 100 LOADS 160 TYPICAL EXAMPLE 140 120 100 80 60 40 20 0 -60 -40 -20 0 20 40 60 80 100 120 140 160 JUNCTION TEMPERATURE (C) Mar. 2002 MITSUBISHI SEMICONDUCTOR TRIAC BCR5AM MEDIUM POWER USE TYPICAL EXAMPLE Tj = 125C BREAKOVER VOLTAGE (dv/dt = xV/s ) BREAKOVER VOLTAGE (dv/dt = 1V/s ) 120 III QUADRANT 100 80 60 40 I QUADRANT 20 0 101 2 3 5 7 102 2 3 5 7 103 2 3 5 7 104 100 (%) 160 BREAKOVER VOLTAGE VS. RATE OF RISE OF OFF-STATE VOLTAGE (Tj = 150C) 160 TYPICAL EXAMPLE Tj = 150C 140 BREAKOVER VOLTAGE (dv/dt = xV/s ) BREAKOVER VOLTAGE (dv/dt = 1V/s ) BREAKOVER VOLTAGE VS. RATE OF RISE OF OFF-STATE VOLTAGE (Tj = 125C) 140 CRITICAL RATE OF RISE OF OFF-STATE COMMUTATING VOLTAGE (V/s) NON-INSULATED TYPE, PLANAR PASSIVATION TYPE 120 III QUADRANT 100 80 60 40 I QUADRANT 20 0 101 2 3 5 7 102 2 3 5 7 103 2 3 5 7 104 RATE OF RISE OF OFF-STATE VOLTAGE (V/s) RATE OF RISE OF OFF-STATE VOLTAGE (V/s) COMMUTATION CHARACTERISTICS (Tj = 125C) COMMUTATION CHARACTERISTICS (Tj = 150C) 7 5 3 2 SUPPLY VOLTAGE TYPICAL EXAMPLE Tj = 125C IT = 4A = 500s VD = 200V f = 3Hz TIME (di/dt)c TIME MAIN CURRENT MAIN VOLTAGE (dv/dt)c TIME VD 101 7 5 I QUADRANT MINIMUM CHARACTERISTICS VALUE 3 2 100 7 0 10 III QUADRANT 2 3 5 7 101 2 3 5 7 102 RATE OF DECAY OF ON-STATE COMMUTATING CURRENT (A/ms) CRITICAL RATE OF RISE OF OFF-STATE COMMUTATING VOLTAGE (V/s) 100 (%) The product guaranteed maximum junction temperature 150C (See warning.) 7 5 3 2 SUPPLY VOLTAGE MAIN VOLTAGE (dv/dt)c 101 7 5 TYPICAL EXAMPLE Tj = 150C IT = 4A = 500s VD = 200V f = 3Hz TIME MAIN CURRENT (di/dt)c TIME TIME VD III QUADRANT I QUADRANT 3 2 100 7 0 10 MINIMUM CHARACTERISTICS VALUE 2 3 5 7 101 2 3 5 7 102 RATE OF DECAY OF ON-STATE COMMUTATING CURRENT (A/ms) GATE TRIGGER CURRENT (tw) GATE TRIGGER CURRENT (DC) 100 (%) GATE TRIGGER CURRENT VS. GATE CURRENT PULSE WIDTH 103 7 5 4 3 2 TYPICAL EXAMPLE IRGT III IRGT I 102 7 5 4 3 2 IFGT I 101 0 10 2 3 4 5 7 101 2 3 4 5 7 102 GATE CURRENT PULSE WIDTH (s) Mar. 2002 MITSUBISHI SEMICONDUCTOR TRIAC BCR5AM MEDIUM POWER USE The product guaranteed maximum junction temperature 150C (See warning.) NON-INSULATED TYPE, PLANAR PASSIVATION TYPE GATE TRIGGER CHARACTERISTICS TEST CIRCUITS 6 RECOMMENDED CIRCUIT VALUES AROUND THE TRIAC 6 LOAD A 6V RG V TEST PROCEDURE 1 C1 A 6V V RG TEST PROCEDURE 2 R1 C1 = 0.1~0.47F R1 = 47~100 C0 R0 C0 = 0.1F R0 = 100 6 A 6V V RG TEST PROCEDURE 3 Mar. 2002