SF2060B-1 - RFM (RF Monolithics, Inc.)

®

RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 E-mail: info@rfm.com Page 1 of 6

RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 http://www.rfm.com

Electrical Characteristics

Characteristic Sym Notes Min Typ Max Units

Center Frequency (Fc variation must also be accounted for with an extra ±94

kHz due to crystal variation ±40 ppm at the LO frequency) fC1115.18 MHz

Insertion Loss (all BW specifications are a function of FC variation) 14 16.2 dB

Amplitude Ripple (p-p) between (Fc-6.250 MHz to Fc-4.3925 MHz) 1.65

dB

Amplitude Ripple (p-p) between (Fc-4.3925 MHz to Fc-2.535 MHz) 1.5

Amplitude Ripple (p-p) between (Fc-2.535 MHz to Fc-0.025 MHz) 1.5

Amplitude Ripple (p-p) between (Fc+0.025 MHz to Fc+2.535 MHz) 1.6

Amplitude Ripple (p-p) between (Fc+2.5350 MHz to Fc+4.3925 MHz) 1.5

Amplitude Ripple (p-p) between (Fc+4.3925 MHz to Fc+6.250 MHz) 1.5

Pass Bandwidth of -1.5 dB 13.5 MHz

Pass Bandwidth of -3 dB 14.5

Low side Attenuation Fc < (Fc -16.5 MHz) 34

dB

Low side Attenuation between: (Fc -16.5 MHz)....(Fc -10.5 MHz) 32

High side Attenuation between: (Fc +9.0 MHz)....(Fc +16.5 MHz) (-15~85°C) 24

High side Attenuation between: (Fc +9.0 MHz)....(Fc +16.5 MHz) (-40~-15°C) 18

High side Attenuation Fc > (Fc +16.5 MHz) 33

Temperature Coefficient of Frequency -18 ppm/°C

Delay Ripple (p-p) between (Fc-6.250 MHz to Fc-4.3925 MHz) SAT1A 150

ns

(Fc-4.3925 MHz to Fc-2.535 MHz) SAT2A 180

(Fc-2.535 MHz to Fc-0.025 MHz) TERA 120

(Fc+0.025 MHz to Fc+2.535 MHz) TERB 120

(Fc+2.535 MHz to Fc+4.3925 MHz) SAT2B 120

(Fc+4.3925 MHz to Fc+6.25 MHz) SAT1B 120

Operating Temperature Range TA1-40 +85 °C

Differential Input and Output Impedance L & C Match to 200 ohms

Case Style 6SMP-03-S 7 x 5 mm Nominal Footprint

Lid Symbolization (YY=year, WW=week, S=shift) See note 4 RFM SF2060B=1 YYWWS

SMP-03-S

•Designed for SDARS Receiver IF Application

•Low Insertion Loss

•5.0 X 7.0 mm Surface-Mount Case

•Differential Input and Output

•Complies with Directive 2002/95/EC (RoHS)

Absolute Maximum Ratings

Rating Value Units

Maximum Incident Power in Passband +10 dBm

Max. DC voltage between any 2 terminals 30 VDC

Storage Temperature Range -40 to +85 °C

Suitable for lead-free soldering - Max Soldering Temperature 260°C for 30 s

115.18 MHz

SAW Filter

SF2060B-1

Notes:

1. Unless noted otherwise, all specifications apply over the operating temperature

range with filter soldered to the specified demonstration board with impedance

matching to 50 Ω and measured with 50 Ω network analyzer.

2. Unless noted otherwise, all frequency specifications are referenced to the nom-

inal center frequency, fc.

3. Rejection is measured as attenuation below the minimum IL point in the pass-

band. Rejection in final user application is dependent on PCB layout and exter-

nal impedance matching design. See Application Note No. 42 for details.

4. The design, manufacturing process, and specifications of this filter are subject

to change.

5. Tape and Reel Standard Per ANSI / EIA 481.

6. US and international patents may apply.

7. RFM, stylized RFM logo, and RF Monolithics, Inc. are registered trademarks of

RF Monolithics, Inc.

Electrostatic Sensitive Device. Observe precautions for handling.

Pb

115.18 MHz SAW Filter

RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 E-mail: info@rfm.com Page 2 of 6

RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 http://www.rfm.com

CH1 S21 log MAG 10 dB/ REF -14 dB

CENTER 115.180 000 MHz SPAN 40.000 000 MHz

SF2060B DEMO

-3 DB PASSBAND

Cor

PRm

28 Jun 2005 13:28:38

1

2

3 4

1_: 0 dB

0.000 000 MHz

REF=1

BW: 14.458 108 MHz

cent: 115.170504 MHz

Q: 7.9658

1_ loss: -14.063 dB

CH1 S21 log MAG 1 dB/ REF -14.8 dB

CENTER 115.180 000 MHz SPAN 40.000 000 MHz

SF2060B DEMO

AMP. RIPPLE AND DELAY

Cor

PRm

CH2 S21 delay REF 700 ns50 ns/

Cor

Smo

PRm

28 Jun 2005 13:27:09

2

3

3_:-.6919 dB

12.500 000 MHz

REF=2

mean:-14.269 dB

s.dev: .2391 dB

p-p: 1.053 dB

2

3

3_ -44.365 ns

12.500 000 MHz

REF=2

mean: 702.56 ns

s.dev: 11.786 ns

p-p: 64.621 ns

115.18 MHz SAW Filter

RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 E-mail: info@rfm.com Page 3 of 6

RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 http://www.rfm.com

CH1 S11 log MAG 5 dB/ REF 0 dB

CENTER 115.180 000 MHz SPAN 40.000 000 MHz

SF2060B DEMO

RETURN LOSS

Cor

PRm

CH2 S22 log MAG REF 0 dB5 dB/

Cor

PRm

28 Jun 2005 13:22:58

1

23

1_:-26.965 dB

115.180 000 MHz

2_:-7.56 dB

108.93 MHz

3_:-6.3919 dB

121.43 MHz

1

23

1_ -25.658 dB

115.180 000 MHz

2_ -6.6543 dB

108.93 MHz

3_ -7.6705 dB

121.43 MHz

CH1 S11 1 U FS

CENTER 115.180 000 MHz SPAN 40.000 000 MHz

SF2060B DEMO

MATCHED TO 200 OHMS

Cor

PRm

CH2 S22 1 U FS

Cor

PRm

28 Jun 2005 13:20:47

1

1_: 45.77 -820.31 m 1.6845 nF

115.180 000 MHz

1

1_ 46.891 3.9805 5.5002 nH

115.180 000 MHz

115.18 MHz SAW Filter

RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 E-mail: info@rfm.com Page 4 of 6

RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 http://www.rfm.com

20.0 mm

47.3 mm

115.18 MHz SAW Filter

RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 E-mail: info@rfm.com Page 5 of 6

RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 http://www.rfm.com

SMP-03-S Case

12-Terminal Ceramic Surface-Mount Case

5 x 7 mm Nominal Footprint

Case Dimensions

Dimension mm Inches

Min Nom Max Min Nom Max

A6.80 7.00 7.20 0.268 0.276 0.283

B4.80 5.00 5.20 0.189 0.197 0.205

C1.65 2.00 0.065 0.079

D0.80

E2.41 2.54 2.67 0.095 0.100 0.105

H0.87 1.1 1.13 0.034 0.039 0.044

J2.54

K2.87 3.00 3.13 0.113 0.118 0.123

P1.14 1.27 1.40 0.045 0.050 0.055

Materials

Solder Pad

Termination Au plating 30 - 60 µinches (76.2-152 µm) over 80-

200 µinches (203-508 µm) Ni.

Lid Fe-Ni-Co Alloy Electroless Nickel Plate (8-11%

Phosphorus) 100-200 µinches Thick

Body Al2O3 Ceramic

Pb Free

Pb

115.18 MHz SAW Filter

RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 E-mail: info@rfm.com Page 6 of 6

RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 http://www.rfm.com

Tape and Reel Specifications

“B “

Nominal Size Quantity Per Reel

Inches millimeters

7 178 500

13 330 2000

USER DIRECTION OF FEED

COMPONENT ORIENTATION and DIMENSIONS

Carrier Tape Dimensions

Ao 5.5 mm

Bo 7.5 mm

Ko 2.0 mm

Pitch 8.0 mm

W16.0 mm

PIN #1

See Detail "A"

13.0

20.2

2.0

12.0

100 REF.

"B" REF.

16.0