P600A thru P600M
Vishay General Semiconductor
Document Number: 88692
Revision: 30-Apr-08
For technical questions within your region, please contact one of the following:
PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com
www.vishay.com
1
General Purpose Plastic Rectifier
FEATURES
• Low forward voltage drop
• Low leakage current
• High forward current capability
• High forward surge capability
• Solder dip 260 °C, 40 s
• Component in accordance to RoHS 2002/95/EC
and WEEE 2002/96/EC
TYPICAL APPLICATIONS
For use in general purpose rectification of power
supplies, inverters, converters and freewheeling
diodes application.
(Note: These devices are not Q101 qualified.)
MECHANICAL DATA
Case: P600, void-free molded epoxy body
Epoxy meets UL 94V-0 flammability rating
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD22-B102
E3 suffix for consumer grade, meets JESD 201 class
1A whisker test
Polarity: Color band denotes cathode end
PRIMARY CHARACTERISTICS
IF(AV) 6.0 A
VRRM 50 V to 1000 V
IFSM 400 A
VF0.9 V, 1.0 V
IR5.0 µA
TJ max. 150 °C
Case Style P600
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER SYMBOL P600A P600B P600D P600G P600J P600K P600M UNIT
Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V
Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V
Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V
Maximum average forward rectified current at
TA = 60 °C, 0.375" (9.5 mm) lead length (Fig. 1)
TL = 60 °C, 0.125" (3.18 mm) lead length (Fig. 2)
IF(AV)
6.0
22 A
Peak forward surge current 8.3 ms single half
sine-wave superimposed on rated load IFSM 400 A
Operating junction and storage temperature range TJ, TSTG - 50 to + 150 °C
P600A thru P600M
Vishay General Semiconductor
www.vishay.com For technical questions within your region, please contact one of the following:
PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com
Document Number: 88692
Revision: 30-Apr-08
2
Note:
(1) Thermal resistance from junction to ambient and from junction to lead at 0.375" (9.5 mm) lead length, P.C.B. mounted with 1.1" x 1.1"
(30 x 30 mm) copper pads
RATINGS AND CHARACTERISTICS CURVES
(TA = 25 °C unless otherwise noted)
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER TEST CONDITIONS SYMBOL P600A P600B P600D P600G P600J P600K P600M UNIT
Maximum instantaneous
forward voltage
6.0 A
100 A VF 0.90
1.30
1.0
1.4 V
Maximum DC reverse current
at rated DC blocking voltage
TA = 25 °C
TA =100 °C IR 5.0
1.0
µA
mA
Typical reverse recovery time IF = 0.5 A, IR = 1.0 A,
Irr = 0.25 A trr 2.5 µs
Typical junction capacitance 4.0 V, 1 MHz CJ 150 pF
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER SYMBOL P600A P600B P600D P600G P600J P600K P600M UNIT
Typical thermal resistance (1) RθJA
RθJL
20
4.0 °C/W
ORDERING INFORMATION (Example)
PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE
P600J-E3/54 2.1 54 800 13" diameter paper tape and reel
P600J-E3/73 2.1 73 300 Ammo pack packaging
Figure 1. Maximum Forward Current Derating Curve
0
0
20 40 60 80100 120 140 160 180200
1.0
2.0
3.0
4.0
5.0
6.0
Standard P.C.B. Mounting
0.375" (9.5 mm) Lead Length
60 Hz
Resistive or
Inductive Load
Average Forward Rectified Current (A)
Ambient Temperature (°C)
1.1 x 1.1" (30 x 30 mm)
Copper Pads
Figure 2. Maximum Non-repetitive Forward Surge Current
0
0
20 40 60 80100 120 140 160 180200
30
25
20
15
10
5
L = 0.625" (15.8 mm)
L = 0.25"
(6.35 mm)
L = 0.375"
(9.5 mm)
Both Leads Attached
to Heat Sinks with
Length as Shown, L
L = 0.125" (3.18 mm) 60 Hz
Resistive or
Inductive Load
Average Forward Current (A)
Lead Temperature (°C)
P600A thru P600M
Vishay General Semiconductor
Document Number: 88692
Revision: 30-Apr-08
For technical questions within your region, please contact one of the following:
PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com
www.vishay.com
3
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
Figure 3. Typical Instantaneous Forward Characteristics
Figure 4. Typical Instantaneous Forward Characteristics
100
10
1
0
100
200
300
400
500
600
8.3 Single Half Sine-Wave
T
A
= 150 °C
T
A
= 25 °C
Number of Cycles at 60 Hz
Peak Forward Surge Current (A)
0.4 0.6 0.81.0 1.2 1.4 1.6
0.01
0.1
10
100
1
Pulse Width = 300 µs
1 % Duty Cycle
Instantaneous Forward Voltage (V)
Instantaneous Forward Current (A)
TJ = 25 °C
Figure 5. Typical Reverse Characteristics
Figure 6. Typical Transient Thermal Impedance
020 40 60 80100
0.01
0.1
1
10
100
TJ = 100 °C
TJ = 125 °C
TJ = 25 °C
Percent of Rated Peak Reverse Voltage (%)
Instantaneous Reverse Current (µA)
0.01 0.1 110 100
0.1
1
10
100
t - Pulse Duration (s)
Transient Thermal Impedance (°C/W)
0.360 (9.1)
0.340 (8.6)
0.052 (1.32)
0.048(1.22)
DIA.
1.0 (25.4)
MIN.
0.360 (9.1)
0.340 (8.6)
1.0 (25.4)
MIN.
Case Style P600
Document Number: 91000 www.vishay.com
Revision: 18-Jul-08 1
Disclaimer
Legal Disclaimer Notice
Vishay
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
