Document 526 -1 Chip Inductors - 0402HP Series (1005) Higher Q and lower DCR than other 0402 inductors Very high SRF values - as high as 16 GHz Excellent current handling capability - up to 2300 mA 52 inductance values from 1.0 to 220 nH F A E terminal 0402HP 0402HPH D 0.010 0,25 E 0.020 0,51 H Pick and place material D I G J F I Terminal wraparound: approx 0.007/0,18 both ends Recommended Land Pattern A max 0.043 1,09 B (min - max) 0.020 - 0.028 0,51 - 0,71 C max 0.024 0,61 inches mm A max 0.044 1,12 B 0.026 0.002 0,66 0,051 C max 0.026 0,66 inches mm F 0.008 0,20 G 0.024 0,61 H 0.026 0,66 I 0.014 0,36 J 0.020 0,51 Current Derating 120 110 100 inches mm Note: Height dimension (C) is before optional solder application. For maximum height dimension including solder, add 0.006 in / 0,152 mm. 90 80 70 60 50 40 30 25C C B overall Core material Ceramic Environmental RoHS compliant, halogen free optional Terminations RoHS compliant silver-palladium-platinum-glass frit. Other terminations available at additional cost. Weight 0.7 - 1.0 mg Ambient temperature -40C to +125C with Irms current, +125C to +140C with derated current Storage temperature Component: -40C to +140C. Tape and reel packaging: -40C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Temperature Coefficient of Inductance (TCL) +25 to +125 ppm/C Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) One per billion hours / one billion hours, calculated per Telcordia SR-332 Packaging 2000 or 5000 per 7 reel. Paper tape: 8 mm wide, 0.66 mm thick, 2 mm pocket spacing PCB washing Tested with pure water or alcohol only. For other solvents, see Doc787_PCB_Washing.pdf Percent of rated Irms * * * * 20 10 0 -40 -20 0 20 40 60 80 100 120 140 Ambient temperature (C) 120 110 100 90 80 70 60 50 40 30 20 10 0 Typical L vs Frequency 2.0 nH 80 11 nH 70 27 nH 60 39 nH 51 nH 68 nH Inductance (nH) Q Factor Typical Q vs Frequency 68 nH 51 nH 50 39 nH 40 30 27 nH 20 11 nH 10 1 10 100 1000 Frequency (MHz) 10000 0 2.0 nH 1 10 US +1-847-639-6400 sales@coilcraft.com UK +44-1236-730595 sales@coilcraft-europe.com Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg 100 1000 10000 Frequency (MHz) Document 526-1 Revised 08/08/13 (c) Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 526-2 0402HP Series (1005) Inductance2 Percent Part number1 (nH) tolerance3 0402HP-1N0XJL_ 1.0 5 0402HP-2N0XJL_ 2.0 5 0402HP-2N2XJL_ 2.2 5 0402HP-2N4X_L_ 2.4 5,3,2 0402HP-2N7X_L_ 2.7 5,3,2 0402HP-3N3X_L_ 3.3 5,3,2 0402HP-3N6X_L_ 3.6 5,3,2 0402HP-3N9X_L_ 3.9 5,3,2 0402HP-4N3X_L_ 4.3 5,3,2 0402HP-4N7X_L_ 4.7 5,3,2 0402HP-5N1X_L_ 5.1 5,3,2 0402HP-5N6X_L_ 5.6 5,3,2 0402HP-6N2X_L_ 6.2 5,3,2 0402HP-6N8X_L_ 6.8 5,3,2 0402HP-7N5X_L_ 7.5 5,3,2 0402HP-8N2X_L_ 8.2 5,3,2 0402HP-8N7X_L_ 8.7 5,3,2 0402HP-9N0X_L_ 9.0 5,3,2 0402HP-9N5X_L_ 9.5 5,3,2 0402HP-10NX_L_ 10 5,3,2 0402HP-11NX_L_ 11 5,3,2 0402HP-12NX_L_ 12 5,3,2 0402HP-13NX_L_ 13 5,3,2 0402HP-15NX_L_ 15 5,3,2 0402HP-16NX_L_ 16 5,3,2 0402HP-18NX_L_ 18 5,3,2 0402HP-19NX_L_ 19 5,3,2 0402HP-20NX_L_ 20 5,3,2 0402HP-21NX_L_ 21 5,3,2 0402HP-22NX_L_ 22 5,3,2 0402HP-23NX_L_ 23 5,3,2 0402HP-24NX_L_ 24 5,3,2 0402HP-25NX_L_ 25 5,3,2 0402HP-26NX_L_ 26 5,3,2 0402HP-27NX_L_ 27 5,3,2 0402HP-30NX_L_ 30 5,3,2 0402HP-33NX_L_ 33 5,3,2 0402HP-36NX_L_ 36 5,3,2 0402HP-37NX_L_ 37 5,3,2 0402HP-39NX_L_ 39 5,3,2 0402HP-40NX_L_ 40 5,3,2 0402HP-43NX_L_ 43 5,3,2 0402HP-47NX_L_ 47 5,3,2 0402HP-51NX_L_ 51 5,3,2 0402HPH-56NX_L_ 56 5,3,2 0402HPH-68NX_L_ 68 5,3,2 0402HPH-82NX_L_ 82 5,3,2 0402HPH-R10X_L_ 100 5,3,2 0402HPH-R12X_L_ 120 5,3,2 0402HPH-R15X_L_ 150 5,3,2 0402HPH-R18X_L_ 180 5,3,2 0402HPH-R22X_L_ 220 5,3,2 900 MHz1.7 GHz Test freq (MHz) L typ Q typ4 L typ Q typ4 250 0.97 46 0.99 72 250 1.96 58 1.98 85 250 2.17 60 2.17 86 250 2.37 60 2.38 83 250 2.66 62 2.68 85 250 3.26 66 3.28 95 250 3.56 65 3.58 94 250 3.87 64 3.91 98 250 4.26 63 4.33 90 250 4.67 58 4.74 83 250 5.07 54 5.16 76 250 5.56 73 5.66 105 250 6.18 73 6.25 100 250 6.78 68 6.97 94 250 7.49 60 7.77 82 250 8.10 68 8.40 95 250 8.73 66 9.04 95 250 8.99 67 9.21 92 250 9.52 64 9.97 90 250 9.98 62 10.4 90 250 11.0 68 11.6 98 250 12.0 66 12.6 100 250 13.1 62 13.9 82 250 15.1 62 16.0 85 250 16.2 57 17.3 77 250 18.2 58 19.5 74 250 19.2 61 20.7 88 250 20.3 58 22.0 76 250 21.3 48 23.2 62 250 22.3 60 24.4 74 250 23.3 60 25.5 77 250 24.5 55 27.1 71 250 25.5 57 28.3 73 250 26.6 56 29.3 74 250 27.3 62 29.5 86 250 30.8 61 35.0 87 250 34.0 61 38.3 80 250 37.1 59 42.2 76 250 38.2 57 44.0 72 250 40.5 56 47.0 84 250 41.3 56 47.4 75 250 45.0 52 54.1 68 250 49.0 48 58.9 62 250 49.1 52 58.8 59 250 58.8 56 72.2 64 250 72.2 56 91.4 64 250 89.7 52 - - 250 - - - - 250 - - - - 100 - - - - 100 - - - - 100 - - - - 1. When ordering, specify tolerance, termination and packaging codes: 0402HP-82NXJLW G = 2% H = 3% J = 5% (Table shows stock tolerances in bold.) Termination: L = RoHS compliant silver-palladium-platinum-glass frit. E = Halogen free component. RoHS compliant silverpalladium-platinum-glass frit terminations. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: W = 7 machine-ready reel. EIA-481 punched paper tape (2000 parts per full reel). Q = 7 machine-ready reel. EIA-481 punched paper tape (5000 parts per full reel). U = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter W instead. Tolerance: Designer's Kits C403A and B contain 20 each of 5% values Designer's Kits C403A-2 and B-2 contain 20 each of 2% values SRF typ5 DCR max6 Irms7 (GHz) (Ohms) (mA) 16.0 0.030 2300 15.2 0.038 2100 15.1 0.038 2100 14.0 0.042 2000 13.0 0.085 1500 12.8 0.045 1700 11.7 0.045 1700 9.50 0.045 1700 7.15 0.050 1600 6.85 0.075 1500 6.80 0.125 1200 6.50 0.055 1600 5.80 0.055 1600 5.80 0.070 1500 5.40 0.100 1400 5.40 0.065 1500 5.00 0.070 1500 5.00 0.080 1400 4.70 0.090 1400 4.70 0.110 1300 4.70 0.065 1400 4.40 0.100 1200 4.20 0.155 870 3.90 0.115 1100 3.70 0.150 850 3.55 0.120 900 3.50 0.145 850 3.50 0.185 780 1.70 0.460 450 3.30 0.160 800 3.30 0.160 800 3.15 0.210 700 3.15 0.260 700 3.15 0.290 700 3.20 0.350 450 2.90 0.350 450 2.80 0.330 490 2.80 0.390 480 2.70 0.480 470 2.60 0.430 450 2.60 0.430 450 2.50 0.520 450 2.40 0.580 420 2.30 0.700 360 2.07 0.900 330 1.84 1.00 320 1.75 1.10 315 1.58 1.20 310 1.25 1.20 310 1.14 2.0 240 1.08 2.1 240 0.96 3.1 160 2. Inductance measured at test frequency using a Coilcraft SMD-F fixture in an Agilent/HP 4286 impedance analyzer with Coilcraft-provided correlation pieces. 3. Tolerances in bold are stocked for immediate shipment. 4. Q measured using an Agilent/HP 4287A with an Agilent/HP 16197 test fixture. 5. SRF measured using an Agilent/HP 8722ES network analyzer and a Coilcraft SMD-D test fixture. 6. DCR measured on a micro-ohmmeter and a Coilcraft CCF858 test fixture. 7. Current that causes a 15C temperature rise from 25C ambient. 8. Electrical specifications at 25C. Refer to Doc 362 "Soldering Surface Mount Components" before soldering. US +1-847-639-6400 sales@coilcraft.com UK +44-1236-730595 sales@coilcraft-europe.com Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg Document 526-2 Revised 08/08/13 (c) Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information.