Panasonic Corporation Automation Controls Business Division industrial.panasonic.com/ac/e/
AXN(1/3/4)
ACCTB25E 201303-T
For board-to-board
P8 Series
Narrow pitch connectors
(0.8mm pitch)
FEATURES
1. The product lineup includes low
profile heights of 3.0 mm, 3.5 mm,
4.0 mm, 4.5 mm, 5.0 mm, 5.5 mm,
6.0 mm, 7.0 mm, 8.0 mm, 11.5 mm, and
13.0 mm 14.0 mm.
2. For the 11.5 mm version, both
socket and header have the same
shape.
Simplifies management of stock and
delivery.
3. Ideal for portable devices, the
bellows-type contacts provide a
strong resistance against falling,
impacts, and forced insertions and
removals.
4. Porosity treatment for improved
resistance against corrosion.
5. Simple lock mechanism
Lock mechanism ensures proper contact
and provides resistance against
vibrations and shocks.
3.0 mm, 3.5 mm, 4.0 mm, 4.5 mm,
5.0 mm, 5.5 mm, 6.0 mm, 7.0 mm,
8.0 mm, 13.0 mm, and 14.0 mm.
The simple lock mechanism is not
featured on the 11.5 mm version.
However, proper contact and resistance
against vibrations and shocks are both
ensured by the long mating length.
6. Automatic mounting (excluding 11.5
mm version)
1) Automatic mounting machine is
available with an exclusive mounting
nozzle.
Using the following types of suction
nozzles make the connectors compatible
with automatic mounting without the need
for suction tape.
Suction tape and covers are also
available for compatibility with other types
of mounting machines.
2) Positioning bosses (without bosses
also available)
APPLICATIONS
Digital devices, such as desktop PC,
laptop and digital video cameras
Socket Header
5.88mm
6.83mm
RoHS compliant
AB
ab
ba
AB
When mated
Bellows-type contacts
Round corner makes contact.
Ex.: Stacking height of 3.0 mm
Bellows-type contacts resist mating stress
and offer high contact reliability.
The bellows type contacts
are fabricated by bending
thin sheet metal. They
offer a reliable contact
since a rounded corner,
instead of a sharp edge,
is used for tuning fork
type contact.
Simple locking
mechanism
Suction tape (socket)
Bosses for positioning on the PC board
(those without bosses are also available).
Suitable for both manual and automatic mounting.
Panasonic Corporation Automation Controls Business Division industrial.panasonic.com/ac/e/
AXN(1/3/4)
ACCTB25E 201303-T
ORDERING INFORMATION
1. P8 (11.5 mm)
2. P8 (3.0 mm, 3.5 mm, 4.0 mm, 4.5 mm, 5.0 mm, 5.5 mm, 6.0 mm, 7.0 mm, 8.0 mm, 13.0 mm, 14.0 mm)
AXN 1 0115
Terminal shape/Mated direction/Mated height
0: For SMD vertical mating, mated height 11.5 mm
Surface treatment (Contact portion / Terminal portion)
1: Ni plating on base, Au plating on surface / Ni plating on base, Au plating on surface
Other specifications
5: Part control number
Number of pins (2 digits)
Packing
P: Embossed tape and paper reel × 2
S: Tube package
1: Narrow Pitch Connector P8 (0.8 mm pitch)
Socket and header are common
Suction cover
Nil: Without suction tape
C: With suction tape
Functions
1: With soldering terminals, with positioning bosses
AXN
Mated height
<Socket>
0: For mated height 3.0 mm, 4.0 mm and 5.0 mm
1: For mated height 6.0 mm, 7.0 mm, 8.0 mm, 13.0 mm and 14.0 mm
2: For mated height 3.5 mm, 4.5 mm and 5.5 mm
<Header>
0: For mated height 13.0 mm
1: For mated height 14.0 mm
3: For mated height 3.0 mm, 3.5 mm and 6.0 mm
4: For mated height 4.0 mm, 4.5 mm and 7.0 mm
5: For mated height 5.0 mm, 5.5 mm and 8.0 mm
Surface treatment (Contact portion / Terminal portion)
<Socket>
0: Ni plating on base, Au plating on surface / Ni plating on base, Au plating on surface (Applies to mated heights of 6.0 to 14.0 mm.)
8: Ni plating on base, Au plating on surface / Ni plating on base, Au plating on surface (Applies to mated heights of 3.0 to 5.5 mm.)
<Header>
0: Ni plating on base, Au plating on surface / Ni plating on base, Au plating on surface
Packing
J: 1,500 pieces embossed tape and paper reel × 2
P: 1,000 pieces embossed tape and paper reel × 2
S: Tube package
Number of pins (2 digits)
3: Narrow Pitch Connector P8 (0.8 mm pitch) Socket
4: Narrow Pitch Connector P8 (0.8 mm pitch) Header
Suction tape and cover
Nil: Socket; without suction tape, Header; without suction cover
C: Socket; with suction tape, Header; with suction cover
Functions
3: With positioning bosses
(Except for mated height 13.0 mm header, embossed tape packing)
4: Without positioning bosses
(Mated height 13.0 mm header, embossed tape packing and mated height 14.0 mm header only)
Notes: 1. The tape width for 100-pin embossed tape packaging is non-JIS standard. Please inquire.
2. The depth of the embossed tape for headers with 13 mm and 14 mm mated heights is non-JIS standard. Please test with your mounter before using.
3. Models possible for “J” packaging are as follows:
Socket mated heights: 3.0 mm, 3.5 mm, 4.0 mm, 4.5 mm, 5.0 mm, and 5.5 mm
Headers: Mated heights 3.0 mm, 3.5 mm, and 6.0 mm
Panasonic Corporation Automation Controls Business Division industrial.panasonic.com/ac/e/
AXN(1/3/4)
ACCTB25E 201303-T
PRODUCT TYPES
Mated
height
No. of
pins
Stick package Embossed tape package
Part No. Packing quantity Part No. Packing quantity
Socket Header Stick Outer
carton Socket Header Inner carton
(1 reel) Outer carton
3.0 mm
16 AXN316038S AXN416330S 50 pcs. 300 pcs. AXN316038* AXN416330*
Note 1)
“Asterisk” mark on
end of part No.;
J: 1,500 pieces
(recommendation)
P: 1,000 pieces
Note 1)
“Asterisk” mark on
end of part No.;
J: 3,000 pieces
(recommendation)
P: 2,000 pieces
20 AXN320038S AXN420330S 50 pcs. 300 pcs. AXN320038* AXN420330*
24 AXN324038S AXN424330S 30 pcs. 300 pcs. AXN324038* AXN424330*
26 AXN326038S AXN426330S 30 pcs. 300 pcs. AXN326038* AXN426330*
30 AXN330038S AXN430330S 30 pcs. 300 pcs. AXN330038* AXN430330*
40 AXN340038S AXN440330S 25 pcs. 300 pcs. AXN340038* AXN440330*
50 AXN350038S AXN450330S 20 pcs. 300 pcs. AXN350038* AXN450330*
60 AXN360038S AXN460330S 15 pcs. 300 pcs. AXN360038* AXN460330*
80 AXN380038S AXN480330S 12 pcs. 300 pcs. AXN380038* AXN480330*
100 AXN300038S AXN400330S 12 pcs. 300 pcs. — —
3.5 mm
16 AXN316238S AXN416330S 50 pcs. 300 pcs. AXN316238* AXN416330*
24 AXN324238S AXN424330S 30 pcs. 300 pcs. AXN324238* AXN424330*
26 AXN326238S AXN426330S 30 pcs. 300 pcs. AXN326238* AXN426330*
30 AXN330238S AXN430330S 30 pcs. 300 pcs. AXN330238* AXN430330*
60 AXN360238S AXN460330S 15 pcs. 300 pcs. AXN360238* AXN460330*
4.0 mm
16 AXN316038S AXN416430S 50 pcs. 300 pcs. AXN316038* AXN416430P
20 AXN320038S AXN420430S 50 pcs. 300 pcs. AXN320038* AXN420430P
26 AXN326038S AXN426430S 30 pcs. 300 pcs. AXN326038* AXN426430P
30 AXN330038S AXN430430S 30 pcs. 300 pcs. AXN330038* AXN430430P
40 AXN340038S AXN440430S 25 pcs. 300 pcs. AXN340038* AXN440430P
50 AXN350038S AXN450430S 20 pcs. 300 pcs. AXN350038* AXN450430P
60 AXN360038S AXN460430S 15 pcs. 300 pcs. AXN360038* AXN460430P
80 AXN380038S AXN480430S 12 pcs. 300 pcs. AXN380038* AXN480430P
100 AXN300038S AXN400430S 12 pcs. 300 pcs. — —
4.5 mm
16 AXN316238S AXN416430S 50 pcs. 300 pcs. AXN316238* AXN416430P
26 AXN326238S AXN426430S 30 pcs. 300 pcs. AXN326238* AXN426430P
30 AXN330238S AXN430430S 30 pcs. 300 pcs. AXN330238* AXN430430P
60 AXN360238S AXN460430S 15 pcs. 300 pcs. AXN360238* AXN460430P
5.0 mm
12 AXN312038S AXN412530S 50 pcs. 300 pcs. AXN312038* AXN412530P
14 AXN314038S AXN414530S 50 pcs. 300 pcs. AXN314038* AXN414530P
20 AXN320038S AXN420530S 50 pcs. 300 pcs. AXN320038* AXN420530P
24 AXN324038S AXN424530S 30 pcs. 300 pcs. AXN324038* AXN424530P
26 AXN326038S AXN426530S 30 pcs. 300 pcs. AXN326038* AXN426530P
30 AXN330038S AXN430530S 30 pcs. 300 pcs. AXN330038* AXN430530P
40 AXN340038S AXN440530S 25 pcs. 300 pcs. AXN340038* AXN440530P
50 AXN350038S AXN450530S 20 pcs. 300 pcs. AXN350038* AXN450530P
60 AXN360038S AXN460530S 15 pcs. 300 pcs. AXN360038* AXN460530P
80 AXN380038S AXN480530S 12 pcs. 300 pcs. AXN380038* AXN480530P
100 AXN300038S AXN400530S 12 pcs. 300 pcs. — —
5.5 mm
12 AXN312238S AXN412530S 50 pcs. 300 pcs. AXN312238* AXN412530P
24 AXN324238S AXN424530S 30 pcs. 300 pcs. AXN324238* AXN424530P
26 AXN326238S AXN426530S 30 pcs. 300 pcs. AXN326238* AXN426530P
30 AXN330238S AXN430530S 30 pcs. 300 pcs. AXN330238* AXN430530P
60 AXN360238S AXN460530S 15 pcs. 300 pcs. AXN360238* AXN460530P
6.0 mm
20 AXN320130S AXN420330S 50 pcs. 300 pcs. AXN320130P AXN420330*
24 AXN324130S AXN424330S 30 pcs. 300 pcs. AXN324130P AXN424330*
26 AXN326130S AXN426330S 30 pcs. 300 pcs. AXN326130P AXN426330*
30 AXN330130S AXN430330S 30 pcs. 300 pcs. AXN330130P AXN430330*
40 AXN340130S AXN440330S 25 pcs. 300 pcs. AXN340130P AXN440330*
50 AXN350130S AXN450330S 20 pcs. 300 pcs. AXN350130P AXN450330*
60 AXN360130S AXN460330S 15 pcs. 300 pcs. AXN360130P AXN460330*
64 AXN364130S AXN464330S 15 pcs. 300 pcs. AXN364130P AXN464330*
80 AXN380130S AXN480330S 12 pcs. 300 pcs. AXN380130P AXN480330*
100 AXN300130S AXN400330S 12 pcs. 300 pcs. — —
7.0 mm
20 AXN320130S AXN420430S 50 pcs. 300 pcs. AXN320130P AXN420430P
22 AXN322130S AXN422430S 30 pcs. 300 pcs. AXN322130P AXN422430P
26 AXN326130S AXN426430S 30 pcs. 300 pcs. AXN326130P AXN426430P
30 AXN330130S AXN430430S 30 pcs. 300 pcs. AXN330130P AXN430430P
40 AXN340130S AXN440430S 25 pcs. 300 pcs. AXN340130P AXN440430P
50 AXN350130S AXN450430S 20 pcs. 300 pcs. AXN350130P AXN450430P
60 AXN360130S AXN460430S 15 pcs. 300 pcs. AXN360130P AXN460430P
80 AXN380130S AXN480430S 12 pcs. 300 pcs. AXN380130P AXN480430P
100 AXN300130S AXN400430S 12 pcs. 300 pcs. — —
Panasonic Corporation Automation Controls Business Division industrial.panasonic.com/ac/e/
AXN(1/3/4)
ACCTB25E 201303-T
Notes: 1. Please add following suffix at * marked positions.
J: Inner carton (1 reel) 1,500 pcs. (Outer carton: 3,000 pcs.)
P: Inner carton (1 reel) 1,000 pcs. (Outer carton: 2,000 pcs.)
In order to reduce the amount of packaging materials used to help protect the global environment, it is recommended that each packaging box contains 1,500 units
with the “J” product number suffix.
As for the part No. P is suffixed, only 1,000 pcs. reel is available.
2. Regarding ordering units: During production: Please make orders in 1-reel units.
Samples for mounting confirmation: Available in units of 50 pieces. Please contact our sales office.
Samples: Small lot orders are possible. Change the suffix “J” to the suffix “P.”
3. Connectors with suction tape and suction cover are also available. Socket: Suction tape, Header: Suction cover. For this type of connector, insert the letter “C”
between the 6th and 7th column of the ordering number.
Example: For a 20 pin contact socket with 3mm mated height (embossed tape package): AXN320C038P
4. The standard type comes with positioning bosses. Connectors without positioning bosses are available for on-demand production (3,000 pcs./lot or more). Please
inquire.
5. Since the embossed tape width of 100 pin contact connectors packaged with embossed tape exceeds the JIS standard, please consult us.
6. Headers that have 13.0 mm mated height and embossed tape packaging do not come with positioning bosses.
The depth of the embossed tape for headers with 13.0 mm and 14.0 mm mated heights is non-JIS compliant. Please test with your mounter before using.
Mated
height
No. of
pins
Stick package Embossed tape package
Part No. Packing quantity Part No. Packing quantity
Socket Header Stick Outer
carton Socket Header Inner carton
(1 reel) Outer carton
8.0 mm
20 AXN320130S AXN420530S 50 pcs. 300 pcs. AXN320130P AXN420530P
1,000 pcs. 2,000 pcs.
22 AXN322130S AXN422530S 30 pcs. 300 pcs. AXN322130P AXN422530P
24 AXN324130S AXN424530S 30 pcs. 300 pcs. AXN324130P AXN424530P
26 AXN326130S AXN426530S 30 pcs. 300 pcs. AXN326130P AXN426530P
30 AXN330130S AXN430530S 30 pcs. 300 pcs. AXN330130P AXN430530P
34 AXN334130S AXN434530S 30 pcs. 300 pcs. AXN334130P AXN434530P
40 AXN340130S AXN440530S 25 pcs. 300 pcs. AXN340130P AXN440530P
50 AXN350130S AXN450530S 20 pcs. 300 pcs. AXN350130P AXN450530P
60 AXN360130S AXN460530S 15 pcs. 300 pcs. AXN360130P AXN460530P
80 AXN380130S AXN480530S 12 pcs. 300 pcs. AXN380130P AXN480530P
100 AXN300130S AXN400530S 12 pcs. 300 pcs. — — — —
11.5 mm
30 AXN1300115S (Socket, Header) 30 pcs. 300 pcs. AXN1300115P (Socket, Header) 350 pcs. 700 pcs.
40 AXN1400115S (Socket, Header) 25 pcs. 300 pcs. AXN1400115P (Socket, Header) 350 pcs. 700 pcs.
50 AXN1500115S (Socket, Header) 20 pcs. 300 pcs. AXN1500115P (Socket, Header) 350 pcs. 700 pcs.
80 AXN1800115S (Socket, Header) 12 pcs. 300 pcs. AXN1800115P (Socket, Header) 250 pcs. 500 pcs.
100 AXN1000115S (Socket, Header) 12 pcs. 300 pcs. — — —
13.0 mm
20 AXN320130S AXN420030S 50 pcs. 300 pcs. AXN320130P AXN420040P Note 6)
Socket: 1,000 pcs.
Header: 500 pcs.
Socket: 2,000 pcs.
Header: 1,000 pcs.
30 AXN330130S AXN430030S 30 pcs. 300 pcs. AXN330130P AXN430040P Note 6)
40 AXN340130S AXN440030S 25 pcs. 300 pcs. AXN340130P AXN440040P Note 6)
50 AXN350130S AXN450030S 20 pcs. 300 pcs. AXN350130P AXN450040P Note 6)
60 AXN360130S AXN460030S 15 pcs. 300 pcs. AXN360130P AXN460040P Note 6)
80 AXN380130S AXN480030S 12 pcs. 300 pcs. AXN380130P AXN480040P Note 6)
14.0 mm 20 AXN320130S AXN420130S 50 pcs. 300 pcs. AXN320130P AXN420130P Socket: 1,000 pcs.
Header: 400 pcs.
Socket: 2,000 pcs.
Header: 800 pcs.
Panasonic Corporation Automation Controls Business Division industrial.panasonic.com/ac/e/
AXN(1/3/4)
ACCTB25E 201303-T
SPECIFICATIONS
1. Characteristics
2. Material and surface treatment
Item
Specifications
Conditions
3mm, 3.5mm, 4mm, 4.5mm,
5.0mm, 5.5mm, 6.0mm, 7.0mm,
8.0mm, 13.0mm, 14.0mm type
11.5mm type
Electrical
characteristics
Rated current 0.5A
Rated voltage 60V AC/DC
Breakdown voltage 250V AC for 1 minute Detection current: 1mA
Insulation resistance Min. 1,000MΩUsing 500V DC megger
Contact resistance Max. 60mΩMax. 50mΩ
Based on the contact resistance
measurement method specified by
JIS C 5402.
Mechanical
characteristics
Composite insertion force Max. 43.1N (30 pin contacts) Max. 0.785N × no. of pins (initial)
Composite removal force Min. 6.37N (30 pin contacts) Min. 0.127N × no. of pins
Contact holding force
40 pin contacts or less:
Min. 1.96N
50 pin contacts or more:
Min. 0.981N
Min. 1.96N Measuring the maximum force.
As the contact is axially pull out.
Environmental
characteristics
Ambient temperature –55°C to +85°C No freezing at low temperatures
Soldering heat resistance
Max. peak temperature of 245°C (on the surface of the PC board
around the connector terminals) Infrared reflow soldering
300°C within 5 seconds Soldering iron
Storage temperature –55°C to +85°C (product only)
–40°C to +50°C (standard packing)
No freezing at low temperatures.
No dew condensation.
Thermal shock resistance
(header and socket mated)
5 cycles, insulation resistance
min. 100MΩ,
contact resistance
max. 60mΩ
5 cycles, insulation resistance
min. 100MΩ,
contact resistance
max. 50mΩ
Conformed to MIL-STD-202F, method 107G
Humidity resistance
(header and socket mated)
120 hours, insulation resistance
min. 100MΩ,
contact resistance
max. 60mΩ
240 hours, insulation resistance
min. 100MΩ,
contact resistance
max. 50mΩ
Bath temperature 40±2°C,
humidity 90 to 95% R.H.
Saltwater spray resistance
(header and socket mated)
24 hours, insulation resistance
min. 100MΩ,
contact resistance
max. 60mΩ
48 hours, insulation resistance
min. 100MΩ,
contact resistance
max. 50mΩ
Bath temperature 35±2°C,
saltwarter concentration 5±1%
H2S resistance
(header and socket mated)
48 hours, contact resistance
max. 60mΩ
96 hours, contact resistance
max. 50mΩ
Bath temperature 40±2°C,
gas concentration 3±1 ppm,
humidity 75 to 80% R.H.
SO2 resistance
(header and socket mated)
48 hours, contact resistance
max. 60mΩ
96 hours, contact resistance
max. 50mΩ
Bath temperature 40±2°C,
gas concentration 10±3 ppm,
humidity 90 to 95% R.H.
Lifetime
characteristics Insertion and removal life 50 times 100 times Repeated insertion and removal speed of
max. 200 times/hours
Unit weight Mated height 3mm 30 pin contacts; Socket: 0.26g Header: 0.26g
50 pin contacts; Socket: 0.40g Header: 0.44g
Part name
3.0mm, 3.5mm, 4.0mm, 4.5mm, 5.0mm, 5.5mm,
6.0mm, 7.0mm, 8.0mm, 13.0mm, 14.0mm type 11.5mm type
Material Surface treatment Material Surface treatment
Molded portion Heat-resistant resin
(UL94V-0) —LCP resin
(UL94V-0) —
Bracket — — Copper alloy Cu plating on base, Sn plating on surface
Contact Copper alloy
Contact portion:
Ni plating on base, Au plating on surface
Te r minal portion:
Ni plating on base, Au plating on surface
(Except for thick of terminal)
Copper alloy
Contact portion:
Ni plating on base, Au plating on surface
Te r minal portion:
Ni plating on base, Au plating on surface
(Except for thick of terminal)
Order Temperature (°C) Time (minutes)
1
2
3
4
–55
85
–55
0
−330
Max. 5
30
Max. 5
+3
0
0
−3
Panasonic Corporation Automation Controls Business Division industrial.panasonic.com/ac/e/
AXN(1/3/4)
ACCTB25E 201303-T
DIMENSIONS (Unit: mm)
The CAD data of the products with a CAD Data mark can be downloaded from: http://industrial.panasonic.com/ac/e/
• Mated height 3.0mm, 4.0mm, 4.5mm, 5.0mm, 5.5mm, 6.0mm, 7.0mm, 8.0mm, 13.0mm, 14.0mm type
1) Socket
Dimension table (mm)
No. of
pins A B C D E F
12 7.40 4.00 6.30 6.30 4.00
0.10
14 8.20 4.80 7.10 7.10 4.80
16 9.00 5.60 7.90 7.90 5.60
20 10.60 7.20 9.50 9.50 7.20
22 11.40 8.00 10.30 10.30 8.00
24 12.20 8.80 11.10 11.10 8.80
26 13.00 9.60 11.90 11.90 9.60
30 14.60 11.20 13.50 13.50 11.20
34 16.20 12.80 15.10 15.10 12.80
40 18.60 15.20 17.50 17.50 15.20
50 23.40 19.20 21.50 21.50 19.20
0.15
60 27.40 23.20 25.50 25.50 23.20
64 29.00 24.80 27.10 27.10 24.80
80 35.40 31.20 33.50 33.50 31.20
100 43.40 39.20 41.50 41.50 39.20
Mated height G
3.0mm, 4.0mm, 5.0mm common 2.20
3.5mm, 4.5mm, 5.5mm common 2.70
6.0mm, 7.0mm, 8.0mm, 13.0mm, 14.0mm common 5.20
General tolerance: ±0.3
5.88
1.95±0.1
0.98
G
4.93
+0.2
–0.1
0.40
C±0.1
0.8±0.05 dia.
C1.0
A
B±0.15
0.80±0.1
0.80±0.1
0.35±0.1
Te rminal coplanarity
F
Recommended PC board pattern
(TOP VIEW)
D±0.05
0.50±0.05
0.80±0.05
0.80±0.05
E±0.05
3.32±0.1
Min.6.38
1.95±0.1
2-0.9 dia. hole
+0.1
0
CAD Data
2) Header
Dimension table (mm)
Note: The 13 mm mated height (20 to 80 pin contacts) terminal
flatness is 0.1 mm.
No. of
pins A B C D E F
12 8.45 4.00 6.30 6.30 4.00
0.10
14 9.25 4.80 7.10 7.10 4.80
16 10.05 5.60 7.90 7.90 5.60
20 11.65 7.20 9.50 9.50 7.20
22 12.45 8.00 10.30 10.30 8.00
24 13.25 8.80 11.10 11.10 8.80
26 14.05 9.60 11.90 11.90 9.60
30 15.65 11.20 13.50 13.50 11.20
34 17.25 12.80 15.10 15.10 12.80
40 19.65 15.20 17.50 17.50 15.20
50 25.85 19.20 21.50 21.50 19.20
Note)
0.15
60 29.85 23.20 25.50 25.50 23.20
64 31.45 24.80 27.10 27.10 24.80
80 37.85 31.20 33.50 33.50 31.20
100 45.85 39.20 41.50 41.50 39.20
Mated height G
3.0mm, 3.5mm, 6.0mm common 2.72
4.0mm, 4.5mm, 7.0mm common 3.72
5.0mm, 5.5mm, 8.0mm common 4.72
13.0mm 10.14
14.0mm 11.14
General tolerance: ±0.3
C±0.1
A
B±0.15
C1.10
G
5.23
5.95
6.83
0.8±0.05 dia.
+0.2
–0.1
0.40
0.80±0.1
0.80±0.1
0.35±0.1
1.95±0.1
Te r minal coplanarity
F
Recommended PC board pattern
(TOP VIEW)
D±0.05
E±0.05
Min.7.33
4.43±0.1
1.95±0.1
0.80±0.05
0.80±0.05
0.50±0.05
2-0.9 dia. hole
+0.1
0
CAD Data
Panasonic Corporation Automation Controls Business Division industrial.panasonic.com/ac/e/
AXN(1/3/4)
ACCTB25E 201303-T
3) Socket and header are mated
Dimension table (mm)
Note: Common for all mated
heights.
No. of pins A
12 8.45
14 9.25
16 10.05
20 11.65
22 12.45
24 13.25
26 14.05
30 15.65
34 17.25
40 19.65
50 25.85
60 29.85
64 31.45
80 37.85
100 45.85
Mated height B
3.0mm 3.00
3.5mm 3.50
4.0mm 4.00
4.5mm 4.50
5.0mm 5.00
5.5mm 5.50
6.0mm 6.00
7.0mm 7.00
8.0mm 8.00
13.0mm 13.00
14.0mm 14.00
A
B
+0.3
–0
6.83
• Mated height 11.5mm type (Socket and Header)
(30 pin contacts, 40 pin contacts, 50 pin contacts)
Dimension table (mm)
No. of
pins A B C D E F G H
30 18.90 15.30 14.00 18.90 11.20 14.00 11.20 19.50
40 22.90 19.30 18.00 22.90 15.20 18.00 15.20 23.50
50 26.90 23.30 22.00 26.90 19.20 22.00 19.20 27.50
General tolerance: ±0.3
A
B
D
X
Y
E±0.15
0.70
9.00
6.20
8.60
8.35
0.80±0.1
0.80±0.1
0.35±0.1
C±0.15
1.1±0.1 dia. 0.8±0.1 dia.
Recommended PC board pattern
(TOP VIEW)
F±0.05
G±0.05
H±0.1
2.00±0.1
2.30±0.1
5.20±0.1
9.00±0.1
4.20±0.1
9.60±0.1
0.50±0.05
0.80±0.05
1.2 dia. hole
+0.1
0
0.80±0.05
0.9 dia. hole
+0.1
0
X-Y cross section Stacking mated diagram
0.15
Terminal coplanarity
8.35
8.6
0.7
1.2
11.5
CAD Data
Panasonic Corporation Automation Controls Business Division industrial.panasonic.com/ac/e/
AXN(1/3/4)
ACCTB25E 201303-T
EMBOSSED TAPE DIMENSIONS (unit: mm, Common for respective contact type, socket and header)
• Mated height 11.5mm type (Socket and Header)
(80 pin contacts, 100 pin contacts)
Dimension table (mm)
No. of
pins A B C D E F G H
80 39.70 36.10 34.80 39.70 32.00 34.80 32.00 40.30
100 47.70 44.10 42.80 47.70 40.00 42.80 40.00 48.30
General tolerance: ±0.3
D
A
B
Y
X
E±0.15
0.70
9.00
6.20
8.60
8.35
0.80±0.1
0.80±0.1
0.35±0.1
C±0.15
1.1±0.1 dia. 0.8±0.1 dia.
Recommended PC board pattern
(TOP VIEW)
H±0.1
2.00±0.1
2.30±0.1
5.20±0.1
9.00±0.1
0.50±0.05
0.80±0.05
0.9 dia. hole
1.2 dia. hole
F±0.05
G±0.05
9.60±0.1
4.20±0.1
0.80±0.05
+0.1
0
+0.1
0
Note: Center terminal is removed for
80 and 100 pin contact type
X-Y cross section Stacking mated diagram
0.15
Terminal coplanarity
8.35
8.6
0.7
1.2
11.5
CAD Data
• Tape dimensions (Conforming to JIS C 0806:1990.
However, some tapes have mounting hole pitches that do
not comply with the standard.)
Tape I Tape II
1.75
C
D
A±0.3
4
2
1.5 dia.
+0.1
0
Pull out direction
1.75
C
D
A±0.3
4
2
Pull out direction
B
1.5 dia.
+0.1
0
• Paper reel dimensions (Conforming to JIS C 0806-1990)
F
E+2
0
Top cover tape
Emboss carrier tape
Label
Panasonic Corporation Automation Controls Business Division industrial.panasonic.com/ac/e/
AXN(1/3/4)
ACCTB25E 201303-T
Dimension table (mm)
(1) Suffix: J (1 reel, 1,500 pieces embossed tape package)
(2) Suffix: P (1 reel, 1,000, 500, 350 and 250 pieces embossed tape package)
Connector orientation with respect to direction of progress of embossed tape
NOTES
Mated height No. of pins Type of taping A B C D E F Quantity per reel
Socket: 3.0mm, 3.5mm, 4.0mm,
4.5mm, 5.0mm, 5.5mm
Header: 3.0mm, 3.5mm, 6.0mm
12 to 32 Tape I 24.00 — 11.50 12.00 24.40 370 dia.
1,500 pcs.
34 to 40 Tape II 32.00 28.40 14.20 12.00 32.40 370 dia.
50 to 60 Tape II 44.00 40.40 20.20 12.00 44.40 370 dia.
80 Tape II 56.00 52.40 26.20 12.00 56.40 370 dia.
Mated height No. of pins Type of taping A B C D E F Quantity per reel
Socket: 3.0mm, 3.5mm, 4.0mm,
4.5mm, 5.0mm, 5.5mm
Header: 3.0mm, 3.5mm, 4.0mm,
4.5mm, 6.0mm, 7.0mm
12 to 32 Tape I 24.00 — 11.50 12.00 24.40 330 dia.
1,000 pcs.
34 to 40 Tape II 32.00 28.40 14.20 12.00 32.40 330 dia.
50 to 60 Tape II 44.00 40.40 20.20 12.00 44.40 330 dia.
80 Tape II 56.00 52.40 26.20 12.00 56.40 330 dia.
Socket: 6.0mm, 7.0mm, 8.0mm,
13.0mm, 14.0mm
Header: 5.0mm, 5.5mm, 8.0mm
16 to 32 Tape I 24.00 — 11.50 12.00 24.40 370 dia.
1,000 pcs.
34 to 40 Tape II 32.00 28.40 14.20 12.00 32.40 370 dia.
50 to 60 Tape II 44.00 40.40 20.20 12.00 44.40 370 dia.
80 Tape II 56.00 52.40 26.20 12.00 56.40 370 dia.
11.5mm
30 to 40 Tape II 32.00 28.40 14.20 24.00 32.40 370 dia. 350 pcs.
50 Tape II 44.00 40.40 20.20 24.00 44.40 370 dia. 350 pcs.
80 Tape II 56.00 52.40 26.20 24.00 56.40 370 dia. 250 pcs.
Header: 13.0mm
20 Tape I 24.00 — 11.50 16.00 24.40 370 dia. 500 pcs.
30 Tape I 24.00 — 11.50 16.00 24.40 370 dia. 500 pcs.
40 Tape II 32.00 28.40 14.20 16.00 32.40 370 dia. 500 pcs.
50 Tape II 44.00 40.40 20.20 16.00 44.40 370 dia. 500 pcs.
60 Tape II 44.00 40.40 20.20 16.00 44.40 370 dia. 500 pcs.
80 Tape II 56.00 52.40 26.20 16.00 56.40 370 dia. 500 pcs.
Header: 14.0mm 20 Tape I 24.00 — 11.50 16.00 24.40 370 dia. 400 pcs.
Type
Direction
of tape progress
Mated height: 3.0mm, 3.5mm, 4.0mm, 4.5mm, 5.0mm, 5.5mm,
6.0mm, 7.0mm, 8.0mm, 13.0mm Mated height 11.5mm
Socket
Header
Socket and header are common
This corner is oriented on the C side.
This corner is oriented on the C side.
Note that types having a mated height of
11.5mm cannot be mated with products
having other mated heights even though
the shape of their socket headers is the
same as the rated shape (position of the
positioning boss and arrangement of
mounting pads) is different.
Please refer to the latest product
specifications when designing your
product.
Panasonic Corporation Automation Controls Business Division industrial.panasonic.com/ac/e/
Notes on Using Narrow pitch Connectors
ACCTB48E 201303-T
Regarding the design of devices and PC board patterns
Regarding the selection of the connector placement machine and the mounting
procedures
Notes on Using Narrow pitch Connectors
1) When connecting several connectors
together by stacking, make sure to
maintain proper accuracy in the design of
structure and mounting equipment so
that the connectors are not subjected to
twisting and torsional forces.
2) With mounting equipment, there may
be up to a ±0.2 to 0.3-mm error in
positioning. Be sure to design PC boards
and patterns while taking into
consideration the performance and
abilities of the required equipment.
3) Some connectors have tabs embossed
on the body to aid in positioning. When
using these connectors, make sure that
the PC board is designed with positioning
holes to match these tabs.
4) To ensure the required mechanical
strength when soldering the connector
terminals, make sure the PC board
meets recommended PC board pattern
design dimensions given.
5) For all connectors of the narrow pitch
series, to prevent the PC board from
coming off during vibrations or impacts,
and to prevent loads from falling directly
on the soldered portions, be sure to
design some means to fix the PC board
in place.
Example) Secure in place with screws
When connecting PC boards, take
appropriate measures to prevent the
connector from coming off.
6) Notes when using a FPC.
(1) When the connector is soldered to an
FPC board, during its insertion and
removal procedures, forces may be
applied to the terminals and cause the
soldering to come off. It is recommended
to use a reinforcement board on the
backside of the FPC board to which the
connector is being connected. Please
make the reinforcement board
dimensions bigger than the outer limits of
the recommended PC board pattern
(should be approximately 1 mm greater
than the outer limit).
Material should be glass epoxy or
polyimide, and the thickness should be
between 0.2 and 0.3 mm.
(2) Collisions, impacts, or turning of FPC
boards, may apply forces on the
connector and cause it to come loose.
Therefore, make to design retaining
plates or screws that will fix the connector
in place.
7) The narrow pitch connector series is
designed to be compact and thin.
Although ease of handling has been
taken into account, take care when
mating the connectors, as displacement
or angled mating could damage or
deform the connector.
Connector
Spacer
Spacer PC board
Screw
1) Select the placement machine taking
into consideration the connector height,
required positioning accuracy, and
packaging conditions.
2) Be aware that if the catching force of
the placement machine is too great, it
may deform the shape of the connector
body or connector terminals.
3) Be aware that during mounting,
external forces may be applied to the
connector contact surfaces and terminals
and cause deformations.
4) Depending on the size of the
connector being used, self alignment
may not be possible. In such cases, be
sure to carefully position the terminal with
the PC board pattern.
5) The positioning bosses give an
approximate alignment for positioning on
the PC board. For accurate positioning of
the connector when mounting it to the PC
board, we recommend using an
automatic positioning machine.
6) Excessive mounter chucking force may
deform the molded or metal part of the
connector. Consult us in advance if
chucking is to be applied.
Panasonic Corporation Automation Controls Business Division industrial.panasonic.com/ac/e/
Notes on Using Narrow pitch Connectors
ACCTB48E 201303-T
Regarding soldering
1. Reflow soldering
1) Measure the recommended profile
temperature for reflow soldering by
placing a sensor on the PC board near
the connector surface or terminals. (The
setting for the sensor will differ depending
on the sensor used, so be sure to
carefully read the instructions that comes
with it.)
2) As for cream solder printing, screen
printing is recommended.
3) To determine the relationship between
the screen opening area and the PC-
board foot pattern area, refer to the
diagrams in the recommended patterns
for PC boards and metal masks. Make
sure to use the terminal tip as a reference
position when setting. Avoid an excessive
amount of solder from being applied,
otherwise, interference by the solder will
cause an imperfect contact.
4) Consult us when using a screen-
printing thickness other than that
recommended.
5) When mounting on both sides of the
PC board and the connector is mounting
on the underside, use adhesives or other
means to ensure the connector is
properly fixed to the PC board. (Double
reflow soldering on the same side is
possible.)
6) N2 reflow, conducting reflow soldering
in a nitrogen atmosphere, increases the
solder flow too greatly, enabling wicking
to occur. Make sure that the solder feed
rate and temperature profile are
appropriate.
Soldering conditions
Please use the reflow temperature profile
conditions recommended below for
reflow soldering. Please contact us
before using a temperature profile other
than that described below (e.g. lead-free
solder).
• Narrow pitch connectors
(except P8 type)
• Narrow pitch connector (P8)
For products other than the ones above,
please refer to the latest product
specifications.
7) The temperatures are measured at the
surface of the PC board near the
connector terminals. (The setting for the
sensor will differ depending on the sensor
used, so be sure to carefully read the
instructions that comes with it.)
8) The temperature profiles given in this
catalog are values measured when using
the connector on a resin-based PC
board. When performed reflow soldering
on a metal board (iron, aluminum, etc.) or
a metal table to mount on a FPC, make
sure there is no deformation or
discoloration of the connector beforehand
and then begin mounting.
9) Consult us when using a screen-
printing thickness other than that
recommended.
10) Some solder and flux types may
cause serious solder or flux creeping.
Solder and flux characteristics should be
taken into consideration when setting the
reflow soldering conditions.
2. Hand soldering
1) Set the soldering iron so that the tip
temperature is less than that given in the
table below.
Ta b le A
2) Do not allow flux to spread onto the
connector leads or PC board. This may
lead to flux rising up to the connector
inside.
3) Touch the soldering iron to the foot
pattern. After the foot pattern and
connector terminal are heated, apply the
solder wire so it melts at the end of the
connector terminals.
4) Be aware that soldering while applying
a load on the connector terminals may
cause improper operation of the
connector.
5) Thoroughly clean the soldering iron.
6) Flux from the solder wire may get on
the contact surfaces during soldering
operations. After soldering, carefully
check the contact surfaces and clean off
any solder before use.
7) For soldering of prototype devices
during product development, you can
perform soldering at the necessary
locations by heating with a hot-air gun by
applying cream solder to the foot pattern
beforehand. However, at this time, make
sure that the air pressure does not move
connectors by carefully holding them
down with tweezers or other similar tool.
Also, be careful not to go too close to the
connectors and melt any of the molded
components.
8) If an excessive amount of solder is
applied during manual soldering, the
solder may creep up near the contact
points, or solder interference may cause
imperfect contact.
3. Solder reworking
1) Finish reworking in one operation.
2) For reworking of the solder bridge, use
a soldering iron with a flat tip. To prevent
flux from climbing up to the contact
surfaces, do not add more flux.
3) Keep the soldering iron tip temperature
below the temperature given in Table A.
Te rminal Paste
solder
PC board
foot pattern
60 to 120 sec.
Preheating
Peak temperature
200°C
220°C
Upper limited (Solder heat resistance)
Peak temperature 260°C
230°C
180°C
150°C
70 sec.
25 sec.
Lower limited (Solder wettability)
Time
Temperature
60 to 120 sec.
Preheating
Time
Temperature
Peak temperature
200°C
155 to 165°C
245°C max.
Within 30 sec.
Product name Soldering iron temperature
SMD type connectors 300°C within 5 sec.
350°C within 3 sec.
Apply the solder
wire here
Terminal
Pattern
PC board
Small angle as
possible up to
45 degrees
Soldering
iron
Panasonic Corporation Automation Controls Business Division industrial.panasonic.com/ac/e/
Notes on Using Narrow pitch Connectors
ACCTB48E 201303-T
Handling Single Components
Storage of connectors
Other Notes
1) Make sure not to drop or allow parts to
fall from work bench
2) Excessive force applied to the
terminals could cause warping, come
out, or weaken the adhesive strength of
the solder. Handle with care.
3) Repeated bending of the terminals
may cause terminals to break.
4) Do not insert or remove the connector
when it is not soldered. Forcibly applied
external pressure on the terminals can
weaken the adherence of the terminals to
the molded part or cause the terminals to
lose their evenness.
5) Excessive prying-force applied to one
end may cause product breakage and
separation of the solder joints at the
terminal.
Excessive force applied for insertion in a
pivot action as shown may also cause
product breakage.
Align the header and socket positions
before connecting them.
Cleaning flux from PC board
1) To increase the cleanliness of the
cleaning fluid and cleaning operations,
prepare equipment for cleaning process
beginning with boil cleaning, ultrasonic
cleaning, and then vapor cleaning.
2) Carefully oversee the cleanliness of
the cleaning fluids to make sure that the
contact surfaces do not become dirty
from the cleaning fluid itself.
3) Since some powerful cleaning
solutions may dissolve molded
components of the connector and wipe
off or discolor printed letters, we
recommend aqua pura electronic parts
cleaners. Please consult us if you wish to
use other types of cleaning fluids.
4) Please note that the surfaces of
molded parts may whiten when cleaned
with alcohol.
Handling the PC board
• Handling the PC board after
mounting the connector
When cutting or bending the PC board
after mounting the connector, be careful
that the soldered sections are subjected
to excessive force.
The soldered areas should not be subjected to force.
1) To prevent problems from voids or air
pockets due to heat of reflow soldering,
avoid storing the connectors in areas of
high humidity. When storing the
connectors for more than six months, be
sure to consider storage area where the
humidity is properly controlled.
2) Depending on the connector type, the
color of the connector may vary from
connector to connector depending on
when it is produced.
Some connectors may change color
slightly if subjected to ultraviolet rays
during storage. This is normal and will not
affect the operation of the connector.
3) When storing the connectors with the
PC boards assembled and components
alreeady set, be careful not to stack them
up so the connectors are subjected to
excessive forces.
4) Avoid storing the connectors in
locations with excessive dust. The dust
may accumulate and cause improper
connections at the contact surfaces.
1) These products are made for the
design of compact and lightweight
devices and therefore the thickness of the
molded components has been made very
thin. Therefore, be careful during
insertion and removal operations for
excessive forces applied may damage
the products.
2) Dropping of the products or rough
mishandling may bend or damage the
terminals and possibly hinder proper
reflow soldering.
3) Before soldering, try not to insert or
remove the connector more than
absolutely necessary.
4) When coating the PC board after
soldering the connector to prevent the
deterioration of insulation, perform the
coating in such a way so that the coating
does not get on the connector.
5) There may be variations in the colors
of products from different production lots.
This is normal.
6) The connectors are not meant to be
used for switching.
7) Be sure not to allow external pressure
to act on connectors when assembling
PCBs or moving in block assemblies.
Panasonic Corporation Automation Controls Business Division industrial.panasonic.com/ac/e/
Notes on Using Narrow pitch Connectors
ACCTB48E 201303-T
Regarding sample orders to confirm proper mounting
When ordering samples to confirm
proper mounting with the placement
machine, connectors are delivered in 50-
piece units in the condition given right.
Consult a sale representative for ordering
sample units.
Condition when delivered from manufacturing
Required number
of products for
sample production
(Unit 50 pcs.)
Embossed tape
amount required for
the mounting
Reel
(Delivery can also be made on a reel by
customer request.)
Please refer to the latest product
specifications when designing your
product.
