High Reliability COTS (CWR09/19/29 Style) T497 High Grade COTS MnO2 Series Overview The KEMET T497 Series is designed for the COTS (Commercial Off-the-Shelf) requirements of military, medical, and aerospace applications. This product is a COTS version of CWR09, 19, and 29 products. The T497 Series is a surface mount product offering various lead-frame plating options, Weibull grading options, X-ray inspection, surge current testing, and other customer-defined testing options. Benefits Applications * * * * * * * * * * * Typical applications include decoupling and filtering in military, medical, and aerospace applications. Established reliability options Taped and reeled per EIA 481-1 Symmetrical, compliant terminations Laser-marked case 100% surge current test available on all case sizes Termination options B, H, and T Weibull failure options B and C Voltage rating of 4 - 50 VDC Operating temperature range of -55C to +125C Capacitance values of 0.1 F to 150 F 100% thermal shock Environmental Compliance RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder. SPICE For a detailed analysis of specific part numbers, please visit www.kemet.com for a free download of KEMET's SPICE software. The KEMET SPICE program is freeware intended to aid design engineers in analyzing the performance of these capacitors over frequency, temperature, ripple, and DC bias conditions. One world. One KEMET (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2011_T497 * 7/19/2013 1 Tantalum Surface Mount Capacitors High Reliability COTS (CWR09/19/29 Style) - T497 High Grade COTS MnO2 Series Ordering Information T 497 G 226 K 020 A H 6110 Capacitor Class Series Case Size Capacitance Code (pF) Capacitance Tolerance Voltage Failure Rate/ Design Lead Material Performance Options T = 100% Matte Tin (Sn) Plated H = Standard Solder Coated (SnPb 5% Pb minimum) B = Gold Plated 6110 = Standard features 6115 = No surge, 100% X-ray, 6210 Surge = 10 cycles 25C, 6215 Surge = 10 cycles 25C, 100% X-ray 6410 Surge = 10 cycles -55C and 85C 6415 Surge = 10 cycles -55C and 85C, 100% X-ray T= High Grade Tantalum COTS A, B, C, D, E, F, G, H, X First two digits K = 10% represent M = 20% significant figures. Third digit specifies number of zeros. 004 = 4 V 006 = 6.3 V 010 = 10 V 016 = 16 V 020 = 20 V 025 = 25 V 035 = 35 V 050 = 50 V A = N/A B = 0.1%/1,000 hours C= 0.01%/1,000 hours Performance Characteristics Item Performance Characteristics Operating Temperature Rated Capacitance Range Capacitance Tolerance Rated Voltage Range -55C to 125C 0.1 F - 150 F @ 120 Hz/25C K Tolerance (10%), M Tolerance (20%) 4 V - 50 V DF (120 Hz) Refer to Part Number Electrical Specification Table ESR (100 kHz) Refer to Part Number Electrical Specification Table Leakage Current 0.01 CV (A) at rated voltage after 5 minutes (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2011_T497 * 7/19/2013 2 Tantalum Surface Mount Capacitors High Reliability COTS (CWR09/19/29 Style) - T497 High Grade COTS MnO2 Series Qualification Test Condition Characteristics C/C Endurance Storage Life Humidity Temperature Stability 105C @ rated voltage, 2,000 hours 125C @ 2/3 rated voltage, 2,000 hours 125C @ 0 volts, 2,000 hours 85C, 85% RH, 1,000 hours No Load Extreme temperature exposure at a succession of continuous steps at +25C, -55C, +25C, +85C, +125C, +25C DF Initial Limit DCL 2 x IL @ 125C ESR 2 x Initial Limit C/C Within -20%/+10% of initial value DF Within initial limits DCL Within 2.0 x initial limit ESR Within 2.0 x initial limit C/C Within -5%/+35% of initial value DF Initial Limit DCL Within 3.0 x initial limit +25C -55C +85C +125C C/C IL* 20% 20% 30% DF IL IL 1.2 x IL 1.5 x IL DCL IL n/a 10 x IL 10 x IL C/C Surge Voltage Mechanical Shock/Vibration Within -20%/+10% of initial value 105C, 1.32 x rated voltage 1,000 cycles MIL-STD-202, Method 213, Condition I, 100 G peak MIL-STD-202, Method 204, Condition D, 10 Hz to 2,000 Hz, 20 G peak Within -20%/+10% of initial value DF Within initial limits DCL Within initial limits ESR Within initial limits C/C Within 10% of initial value DF Within initial limits DCL Within initial limits *IL = Initial limit (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2011_T497 * 7/19/2013 3 Tantalum Surface Mount Capacitors High Reliability COTS (CWR09/19/29 Style) - T497 High Grade COTS MnO2 Series Electrical Characteristics Capacitance vs. Frequency ESR vs. Frequency 1000 1,000 T497D106/15 T497D106/15_IMP T497F336/15 100 T497H107/15_IMP Capacitance (F) Impedance, ESR (Ohms) T497F336/15_IMP T497D106/15_ESR T497F336/15_ESR T497F107/15_ESR 10 1 0.1 T497H107/15 100 10 1 100 1,000 10,000 100,000 Frequency (Hz) 1,000,000 0 10,000,000 100 1,000 10,000 100,000 Frequency (Hz) 1,000,000 10,000,000 Dimensions - Millimeters (Inches) Metric will govern Case Size Component KEMET L* 0.38 (0.015) W* 0.38 (0.015) H* 0.38 (0.015) P +0.25 (0.010), -0.13 (0.005) A 2.54 (.100) 1.27 (.050) 1.27 (.050) 0.76 (.030) B 3.81 (.150) 1.27 (.050) 1.27 (.050) 0.76 (.030) C 5.08 (.200) 1.27 (.050) 1.27 (.050) 0.76 (.030) D 3.81 (.150) 2.54 (.100) 1.27 (.050) 0.76 (.030) E 5.08 (.200) 2.54 (.100) 1.27 (.050) 0.76 (.030) F 5.59 (.220) 3.43 (.135) 1.78 (.070) 0.76 (.030) G 6.73 (.265) 2.79 (.110) 2.79 (.110) 1.27 (.050) H 7.24 (.285) 3.81 (.150) 2.79 (.110) 1.27 (.050) X 6.93 (.273) 5.41 (.213) 2.74 (.108) 1.19 (.047) W2 H2 Minimum 1.27 0.13 (0.050 0.005) 1.27 0.13 (0.050 0.005) 1.27 0.13 (0.050 0.005) 2.41 +0.13, -0.25 (0.095 +0.005, -0.010) 2.41 +0.13, -0.25 (0.095 +0.005, -0.010) 3.30 0.13 (0.130 0.005) 2.67 0.13 (0.105 0.005) 3.68 +0.013, -0.51 (0.145 +0.005, -0.020) 3.05 0.13 (0.120 0.005) 0.76 (0.030) 0.76 (0.030) 0.76 (0.030) 0.76 (0.030) 0.76 (0.030) 1.02 (0.040) 1.52 (0.060) 1.52 (0.060) 1.22 (0.048) Note: When solder coated terminations are required, add an additional 0.38 mm (0.015 inch) to the above tolerances for "L", "W", "H", "P" ,"W2" and "H2" (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2011_T497 * 7/19/2013 4 Tantalum Surface Mount Capacitors High Reliability COTS (CWR09/19/29 Style) - T497 High Grade COTS MnO2 Series Table 1 - Ratings & Part Number Reference Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage VDC F KEMET/EIA A/1005 B/1505 B/1505 D/1510 F/2214 E/2010 F/2214 G/2711 H/2915 (See below for part options) T497A475(1)004(2)(3) T497B475(1)004(2)(3) T497B156(1)004(2)(3) T497D336(1)004(2)(3) T497F336(1)004(2)(3) T497E686(1)004(2)(3) T497F686(1)004(2)(3) T497G686(1)004(2)(3) T497H107(1)004(2)(3) A @ +20C Maximum/5 Min 0.2 0.2 0.6 1.3 1.3 2.7 2.7 2.7 4.0 4 4 4 4 4 4 4 4 4 4.7 4.7 15 33 33 68 68 68 100 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 1.5 2.2 3.3 3.3 4.7 4.7 6.8 6.8 10 10 15 15 22 22 22 33 47 47 68 68 100 150 150 A/1005 A/1005 A/1005 B/1505 A/1005 D/1510 B/1505 D/1510 B/1505 E/2010 B/1505 D/1510 D/1510 E/2010 F/2214 E/2010 F/2214 G/2711 F/2214 H/2915 G/2711 G/2711 H/2915 T497A155(1)006(2)(3) T497A225(1)006(2)(3) T497A335(1)006(2)(3) T497B335(1)006(2)(3) T497A475(1)006(2)(3) T497D475(1)006(2)(3) T497B685(1)006(2)(3) T497D685(1)006(2)(3) T497B106(1)006(2)(3) T497E106(1)006(2)(3) T497B156(1)006(2)(3) T497D156(1)006(2)(3) T497D226(1)006(2)(3) T497E226(1)006(2)(3) T497F226(1)006(2)(3) T497E336(1)006(2)(3) T497F476(1)006(2)(3) T497G476(1)006(2)(3) T497F686(1)006(2)(3) T497H686(1)006(2)(3) T497G107(1)006(2)(3) T497G157(1)006(2)(3) T497H157(1)006(2)(3) 0.1 0.1 0.2 0.2 0.3 0.3 0.4 0.4 0.6 0.6 0.9 0.9 1.4 1.4 1.4 2.1 3.0 3.0 4.3 4.3 6.3 9.5 9.5 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 0.47 1 1.5 2.2 2.2 3.3 3.3 4.7 4.7 6.8 6.8 6.8 10 10 10 15 A/1005 A/1005 A/1005 A/1005 B/1505 A/1005 B/1505 B/1505 D/1510 B/1505 F/2214 E/2010 B/1505 D/1510 E/2010 D/1510 VDC F KEMET/EIA T497A474(1)010(2)(3) T497A105(1)010(2)(3) T497A155(1)010(2)(3) T497A225(1)010(2)(3) T497B225(1)010(2)(3) T497A335(1)010(2)(3) T497B335(1)010(2)(3) T497B475(1)010(2)(3) T497D475(1)010(2)(3) T497B685(1)010(2)(3) T497F685(1)010(2)(3) T497E685(1)010(2)(3) T497B106(1)010(2)(3) T497D106(1)010(2)(3) T497E106(1)010(2)(3) T497D156(1)010(2)(3) (See below for part options) 0.0 0.1 0.2 0.2 0.2 0.3 0.3 0.5 0.5 0.7 0.7 0.7 1.0 1.0 1.0 1.5 A @ +20C Maximum/5 Min Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF Moisture Sensitivity ESR % @ 20C 120 Hz @ +20C 100 kHz Maximum Maximum 6.0 12.0 6.0 8.0 8.0 8.0 8.0 4.0 8.0 2.2 8.0 3.0 6.0 2.0 10.0 1.1 10.0 0.9 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 8.0 8.0 8.0 6.0 8.0 8.0 6.0 8.0 10.0 10.0 10.0 10.0 10.0 10.0 8.0 10.0 12.0 8.0 12.0 5.5 8.0 4.5 8.0 3.5 8.0 5.0 5.0 3.5 2.2 3.5 3.5 1.1 1.5 0.9 1.1 1.1 0.9 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 6.0 10.0 6.0 10.0 6.0 10.0 6.0 12.0 6.0 8.0 6.0 12.0 6.0 10.0 6.0 8.0 6.0 4.5 6.0 8.0 6.0 5.0 6.0 3.5 8.0 8.0 6.0 4.0 6.0 3.5 6.0 5.0 % @ 20C 120 Hz @ +20C 100 kHz Maximum Maximum DF ESR Reflow Temperature 260C 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Reflow Temperature 260C Moisture Sensitivity (1) To complete KEMET part number, insert M for 20% or K for 10%. Designates Capacitance tolerance. (2) To complete KEMET part number, insert B (0.1%/1,000 hours), C (0.01%/1,000 hours) or A = N/A. Designates Reliability Level. (3) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, B = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates Termination Finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com Roll Over for Order Info. T2011_T497 * 7/19/2013 5 Tantalum Surface Mount Capacitors High Reliability COTS (CWR09/19/29 Style) - T497 High Grade COTS MnO2 Series Table 1 - Ratings & Part Number Reference cont'd Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage VDC F KEMET/EIA E/2010 F/2214 D/1510 E/2010 F/2214 G/2711 F/2214 G/2711 F/2214 G/2711 H/2915 G/2711 G/2711 H/2915 H/2915 (See below for part options) T497E156(1)010(2)(3) T497F156(1)010(2)(3) T497D226(1)010(2)(3) T497E226(1)010(2)(3) T497F226(1)010(2)(3) T497G226(1)010(2)(3) T497F336(1)010(2)(3) T497G336(1)010(2)(3) T497F476(1)010(2)(3) T497G476(1)010(2)(3) T497H476(1)010(2)(3) T497G686(1)010(2)(3) T497G107(1)010(2)(3) T497H107(1)010(2)(3) T497H157(1)010(2)(3) A @ +20C Maximum/5 Min 1.5 1.5 2.2 2.2 2.2 2.2 3.3 3.3 4.7 4.7 4.7 6.8 10.0 10.0 15.0 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 15 15 22 22 22 22 33 33 47 47 47 68 100 100 150 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 0.1 0.22 0.33 0.68 1 1.5 1.5 2.2 3.3 3.3 4.7 4.7 4.7 6.8 10 10 10 15 15 22 22 33 33 47 68 100 A/1005 A/1005 A/1005 A/1005 A/1005 A/1005 B/1505 A/1005 B/1505 D/1510 B/1505 D/1510 E/2010 D/1510 D/1510 E/2010 F/2214 E/2010 F/2214 F/2214 G/2711 F/2214 H/2915 G/2711 H/2915 H/2915 T497A104(1)015(2)(3) T497A224(1)015(2)(3) T497A334(1)015(2)(3) T497A684(1)015(2)(3) T497A105(1)015(2)(3) T497A155(1)015(2)(3) T497B155(1)015(2)(3) T497A225(1)015(2)(3) T497B335(1)015(2)(3) T497D335(1)015(2)(3) T497B475(1)015(2)(3) T497D475(1)015(2)(3) T497E475(1)015(2)(3) T497D685(1)015(2)(3) T497D106(1)015(2)(3) T497E106(1)015(2)(3) T497F106(1)015(2)(3) T497E156(1)015(2)(3) T497F156(1)015(2)(3) T497F226(1)015(2)(3) T497G226(1)015(2)(3) T497F336(1)015(2)(3) T497H336(1)015(2)(3) T497G476(1)015(2)(3) T497H686(1)015(2)(3) T497H107(1)015(2)(3) 0.0 0.0 0.0 0.1 0.2 0.2 0.2 0.3 0.5 0.5 0.7 0.7 0.7 1.0 1.5 1.5 1.5 2.3 2.3 3.3 3.3 5.0 5.0 7.1 10.2 15.0 20 20 20 20 20 20 20 0.15 0.47 0.68 0.68 1 1 1.5 A/1005 A/1005 A/1005 B/1505 A/1005 B/1505 B/1505 VDC F KEMET/EIA T497A154(1)020(2)(3) T497A474(1)020(2)(3) T497A684(1)020(2)(3) T497B684(1)020(2)(3) T497A105(1)020(2)(3) T497B105(1)020(2)(3) T497B155(1)020(2)(3) (See below for part options) 0.0 0.1 0.1 0.1 0.2 0.2 0.3 A @ +20C Maximum/5 Min Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF Moisture Sensitivity ESR % @ 20C 120 Hz @ +20C 100 kHz Maximum Maximum 8.0 3.0 8.0 2.5 6.0 4.0 8.0 2.0 8.0 1.5 8.0 1.5 8.0 1.5 10.0 1.5 10.0 1.5 10.0 1.0 10.0 0.9 10.0 1.1 10.0 1.1 10.0 0.9 10.0 0.9 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 8.0 6.0 6.0 8.0 8.0 8.0 10.0 15.0 15.0 15.0 20.0 15.0 15.0 8.0 15.0 9.0 5.0 5.0 6.0 4.0 6.0 6.0 4.0 2.5 4.0 2.5 3.0 1.1 3.0 0.9 1.1 0.9 0.9 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 8.0 15.0 8.0 14.0 6.0 15.0 6.0 10.0 6.0 15.0 6.0 12.0 6.0 9.0 % @ 20C 120 Hz @ +20C 100 kHz Maximum Maximum DF ESR Reflow Temperature 260C 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Reflow Temperature 260C Moisture Sensitivity (1) To complete KEMET part number, insert M for 20% or K for 10%. Designates Capacitance tolerance. (2) To complete KEMET part number, insert B (0.1%/1,000 hours), C (0.01%/1,000 hours) or A = N/A. Designates Reliability Level. (3) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, B = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates Termination Finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com Roll Over for Order Info. T2011_T497 * 7/19/2013 6 Tantalum Surface Mount Capacitors High Reliability COTS (CWR09/19/29 Style) - T497 High Grade COTS MnO2 Series Table 1 - Ratings & Part Number Reference cont'd Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage VDC F KEMET/EIA B/1505 D/1510 D/1510 E/2010 E/2010 F/2214 D/1510 E/2010 F/2214 F/2214 F/2214 G/2711 G/2711 H/2915 H/2915 H/2915 (See below for part options) T497B225(1)020(2)(3) T497D225(1)020(2)(3) T497D335(1)020(2)(3) T497E335(1)020(2)(3) T497E475(1)020(2)(3) T497F475(1)020(2)(3) T497D685(1)020(2)(3) T497E685(1)020(2)(3) T497F685(1)020(2)(3) T497F106(1)020(2)(3) T497F156(1)020(2)(3) T497G156(1)020(2)(3) T497G226(1)020(2)(3) T497H226(1)020(2)(3) T497H336(1)020(2)(3) T497H476(1)020(2)(3) A @ +20C Maximum/5 Min 0.4 0.4 0.7 0.7 0.9 0.9 1.4 1.4 1.4 2.0 3.0 3.0 4.4 4.4 6.6 9.4 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 2.2 2.2 3.3 3.3 4.7 4.7 6.8 6.8 6.8 10 15 15 22 22 33 47 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 0.33 0.47 0.68 1 1 1.5 2.2 2.2 3.3 4.7 6.8 6.8 10 10 15 15 22 22 22 33 33 A/1005 A/1005 B/1505 B/1505 C/2005 D/1510 D/1510 E/2010 E/2010 F/2214 F/2214 G/2711 F/2214 G/2711 G/2711 H/2915 G/2711 H/2915 X/2824 H/2915 X/2824 T497A334(1)025(2)(3) T497A474(1)025(2)(3) T497B684(1)025(2)(3) T497B105(1)025(2)(3) T497C105(1)025(2)(3) T497D155(1)025(2)(3) T497D225(1)025(2)(3) T497E225(1)025(2)(3) T497E335(1)025(2)(3) T497F475(1)025(2)(3) T497F685(1)025(2)(3) T497G685(1)025(2)(3) T497F106(1)025(2)(3) T497G106(1)025(2)(3) T497G156(1)025(2)(3) T497H156(1)025(2)(3) T497G226(1)025(2)(3) T497H226(1)025(2)(3) T497X226(1)025(2)(3) T497H336(1)025(2)(3) T497X336(1)025(2)(3) 0.1 0.1 0.2 0.3 0.3 0.4 0.6 0.6 0.8 1.2 1.7 1.7 2.5 2.5 3.8 3.8 5.5 5.5 5.5 8.3 8.3 35 35 35 35 35 35 35 35 35 35 35 0.22 0.33 0.47 0.68 1 1.5 3.3 4.7 6.8 6.8 10 A/1005 A/1005 B/1505 C/2005 D/1510 E/2010 F/2214 G/2711 G/2711 H/2915 H/2915 VDC F KEMET/EIA T497A224(1)035(2)(3) T497A334(1)035(2)(3) T497B474(1)035(2)(3) T497C684(1)035(2)(3) T497D105(1)035(2)(3) T497E155(1)035(2)(3) T497F335(1)035(2)(3) T497G475(1)035(2)(3) T497G685(1)035(2)(3) T497H685(1)035(2)(3) T497H106(1)035(2)(3) (See below for part options) 0.1 0.1 0.2 0.2 0.4 0.5 1.2 1.6 2.4 2.4 3.5 A @ +20C Maximum/5 Min Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF Moisture Sensitivity ESR % @ 20C 120 Hz @ +20C 100 kHz Maximum Maximum 6.0 9.0 6.0 5.0 6.0 6.0 6.0 4.0 6.0 6.0 6.0 4.0 6.0 5.0 6.0 5.0 6.0 2.4 6.0 3.0 6.0 3.0 6.0 1.1 6.0 2.5 6.0 0.9 8.0 0.9 8.0 0.9 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 8.0 8.0 15.0 15.0 7.5 10.0 6.5 6.5 6.0 3.5 4.0 2.5 3.0 1.2 2.5 1.4 1.4 1.0 1.4 0.9 0.9 0.9 0.9 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 6.0 18.0 6.0 22.0 6.0 10.0 6.0 8.0 6.0 6.5 6.0 4.5 6.0 2.5 6.0 1.5 6.0 1.3 6.0 1.3 8.0 0.9 % @ 20C 120 Hz @ +20C 100 kHz Maximum Maximum DF ESR Reflow Temperature 260C 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Reflow Temperature 260C Moisture Sensitivity (1) To complete KEMET part number, insert M for 20% or K for 10%. Designates Capacitance tolerance. (2) To complete KEMET part number, insert B (0.1%/1,000 hours), C (0.01%/1,000 hours) or A = N/A. Designates Reliability Level. (3) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, B = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates Termination Finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com Roll Over for Order Info. T2011_T497 * 7/19/2013 7 Tantalum Surface Mount Capacitors High Reliability COTS (CWR09/19/29 Style) - T497 High Grade COTS MnO2 Series Table 1 - Ratings & Part Number Reference cont'd Rated Voltage Rated Capacitance Case Code/ Case Size VDC F KEMET/EIA 35 15 X/2824 50 50 50 50 50 50 50 50 50 50 50 0.1 0.15 0.22 0.33 0.47 0.68 1 1.5 2.2 3.3 4.7 A/1005 A/1005 B/1505 B/1505 C/2005 D/1510 E/2010 F/2214 F/2214 G/2711 H/2915 VDC F KEMET/EIA Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage (See below for part options) T497X156(1)035(2)(3) A @ +20C Maximum/5 Min 5.3 % @ 20C 120 Hz @ +20C 100 kHz Maximum Maximum 6.0 0.9 Reflow Temperature 260C 1.0 T497A104(1)050(2)(3) T497A154(1)050(2)(3) T497B224(1)050(2)(3) T497B334(1)050(2)(3) T497C474(1)050(2)(3) T497D684(1)050(2)(3) T497E105(1)050(2)(3) T497F155(1)050(2)(3) T497F225(1)050(2)(3) T497G335(1)050(2)(3) T497H475(1)050(2)(3) (See below for part options) 0.1 0.1 0.1 0.2 0.2 0.3 0.5 0.8 1.1 1.7 2.4 A @ +20C Maximum/5 Min 6.0 22.0 6.0 17.0 6.0 14.0 6.0 12.0 6.0 8.0 6.0 7.0 6.0 6.0 6.0 4.0 6.0 2.5 6.0 2.0 6.0 1.5 % @ 20C 120 Hz @ +20C 100 kHz Maximum Maximum 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Reflow Temperature 260C KEMET Part Number DC Leakage DF DF Moisture Sensitivity ESR ESR Moisture Sensitivity (1) To complete KEMET part number, insert M for 20% or K for 10%. Designates Capacitance tolerance. (2) To complete KEMET part number, insert B (0.1%/1,000 hours), C (0.01%/1,000 hours) or A = N/A. Designates Reliability Level. (3) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, B = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates Termination Finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com Roll Over for Order Info. T2011_T497 * 7/19/2013 8 Tantalum Surface Mount Capacitors High Reliability COTS (CWR09/19/29 Style) - T497 High Grade COTS MnO2 Series Recommended Voltage Derating Guidelines 85C to 125C 120% VR 67% of VR 100% 50% of VR 33% of VR % Working Voltage % Change in Working DC Voltage with Temperature Recommended Maximum Application Voltage -55C to 85C 80% 60% 40% 20% 0% % Change in Working DC Voltage with Temperature 67% Recommended Maximum Application Voltage (As % of Rated Voltage) -55 25 33% 85 Temperature (C) 125 Ripple Current/Ripple Voltage Permissible AC ripple voltage and current are related to equivalent series resistance (ESR) and the power dissipation capabilities of the device. Permissible AC ripple voltage which may be applied is limited by two criteria: 1. The positive peak AC voltage plus the DC bias voltage, if any, must not exceed the DC voltage rating of the capacitor. 2. The negative peak AC voltage in combination with bias voltage, if any, must not exceed the allowable limits specified for reverse voltage. See the Reverse Voltage section for allowable limits. The maximum power dissipation by case size can be determined using the table at right. The maximum power dissipation rating stated in the table must be reduced with increasing environmental operating temperatures. Refer to the table below for temperature compensation requirements. KEMET Case Code EIA Case Code A B C D E F G H 1005 1505 2005 1510 2010 2214 2711 2915 Maximum Power Dissipation (P max) mWatts @ 25C w/+20C Rise 50 70 75 80 90 100 125 150 The maximum power dissipation rating must be reduced with increasing environmental operating temperatures. Refer to the Temperature Compensation Multiplier table for details. Temperature Compensation Multipliers for Maximum Power Dissipation 25C 1.00 85C 0.90 125C 0.40 T= Environmental Temperature Using the P max of the device, the maximum allowable rms ripple current or voltage may be determined. I(max) = P max/R E(max) = Z P max/R I = rms ripple current (amperes) E = rms ripple voltage (volts) P max = maximum power dissipation (watts) R = ESR at specified frequency (ohms) Z = Impedance at specified frequency (ohms) (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2011_T497 * 7/19/2013 9 Tantalum Surface Mount Capacitors High Reliability COTS (CWR09/19/29 Style) - T497 High Grade COTS MnO2 Series Reverse Voltage Solid tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected with the wrong polarity. The positive terminal is identified on the capacitor body by a stripe plus in some cases a beveled edge. A small degree of transient reverse voltage is permissible for short periods per the table. The capacitors should not be operated continuously in reverse mode, even within these limits. Temperature Permissible Transient Reverse Voltage 25C 85C 125C 15% of Rated Voltage 5% of Rated Voltage 1% of Rated Voltage Table 2 - Land Dimensions/Courtyard KEMET Metric Size Code Density Level A: Maximum (Most) Land Protrusion (mm) Density Level B: Median (Nominal) Land Protrusion (mm) Density Level C: Minimum (Least) Land Protrusion (mm) Case EIA L W S V1 V2 L W S V1 V2 L W S V1 V2 A B C D E F G H X 1005 1505 2005 1510 2010 2214 2711 2915 2824 2.19 2.30 2.30 2.30 2.30 2.30 2.81 2.81 2.73 1.44 1.44 1.44 2.58 2.58 3.47 2.84 3.84 3.22 0.15 1.20 2.47 1.20 2.47 2.98 3.10 3.61 3.46 5.54 6.80 8.08 6.80 8.08 8.58 9.72 10.24 9.92 2.66 2.66 2.66 3.92 3.92 4.82 4.18 5.20 6.80 1.89 1.90 1.90 1.90 1.90 1.90 2.41 2.41 2.33 1.32 1.32 1.32 2.46 2.46 3.35 2.72 3.72 3.10 0.15 1.40 2.67 1.40 2.67 3.18 3.30 3.81 3.66 4.44 5.70 6.98 5.70 6.98 7.48 8.62 9.14 8.82 2.16 2.16 2.16 3.42 3.42 4.32 3.68 4.70 6.30 1.52 1.52 1.52 1.52 1.52 1.52 2.03 2.03 1.95 1.22 1.22 1.22 2.36 2.36 3.25 2.62 3.62 3.00 0.29 1.56 2.83 1.56 2.83 3.34 3.46 3.97 3.82 3.58 4.84 6.12 4.84 6.12 6.62 7.76 8.28 7.96 1.90 1.90 1.90 3.16 3.16 4.06 3.42 4.44 6.04 Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow solder processes. Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes. Density Level C: For high component desity product applications. Before adapting the minimum land pattern variations the user should perform qualification testing based on the conditions outlined in IPC standard 7351 (IPC-7351). Land pattern geometry is too small for silkscreen outline. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2011_T497 * 7/19/2013 10 Tantalum Surface Mount Capacitors High Reliability COTS (CWR09/19/29 Style) - T497 High Grade COTS MnO2 Series Soldering Process Please note that although the X/7343-43 case size can withstand wave soldering, the tall profile (4.3 mm maximum) dictates care in wave process development. Hand soldering should be performed with care due to the difficulty in process control. If performed, care should be taken to avoid contact of the soldering iron to the molded case. The iron should be used to heat the solder pad, applying solder between the pad and the termination, until reflow occurs. Once reflow occurs, the iron should be removed immediately. "Wiping" the edges of a chip and heating the top surface is not recommended. During typical reflow operations, a slight darkening of the goldcolored epoxy may be observed. This slight darkening is normal and not harmful to the product. Marking permanency is not affected by this change. Profile Feature SnPb Assembly Pb-Free Assembly Preheat/Soak Temperature Minimum (TSmin) 100C 150C Temperature Maximum (TSmax) 150C 200C Time (ts) from Tsmin to Tsmax) 60 - 120 seconds 60 - 120 seconds 3C/seconds maximum Ramp-up Rate (TL to TP) 3C/seconds maximum Liquidous Temperature (TL) 183C 217C Time Above Liquidous (tL) 60 - 150 seconds 220C* 235C** 60 - 150 seconds 250C* 260C** Peak Temperature (TP) Time within 5C of Maximum Peak Temperature (tP) Ramp-down Rate (TP to TL) 20 seconds maximum 30 seconds maximum 6C/seconds maximum 6C/seconds maximum Time 25C to Peak Temperature 6 minutes maximum 8 minutes maximum Note: All temperatures refer to the center of the package, measured on the package body surface that is facing up during assembly reflow. *Case Size D, E, P, Y, and X **Case Size A, B, C, H, I, K, M, R, S, T, U, V, W, and Z TP TL Temperature KEMET's families of surface mount capacitors are compatible with wave (single or dual), convection, IR, or vapor phase reflow techniques. Preheating of these components is recommended to avoid extreme thermal stress. KEMET's recommended profile conditions for convection and IR reflow reflect the profile conditions of the IPC/J-STD-020D standard for moisture sensitivity testing. The devices can safely withstand a maximum of three reflow passes at these conditions. tP Maximum Ramp Up Rate = 3C/seconds Maximum Ramp Down Rate = 6C/seconds tL Tsmax Tsmin 25 tS 25C to Peak Time Construction MNO2 /Ta2O5/Ta Silver Adhesive Silver Paint Washer Leadframe (-Cathode) Leadframe (+Anode) Carbon Tantalum Wire Weld (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2011_T497 * 7/19/2013 11 Tantalum Surface Mount Capacitors High Reliability COTS (CWR09/19/29 Style) - T497 High Grade COTS MnO2 Series Capacitor Marking KEMET High Reliability COTS Rated Voltage Polarity Indicator (+) 156 35 K 230 Picofarad Code KEMET ID Date Code* * 230 = 30th week of 2012 Date Code * 1 digit = Last number of Year 9 = 2009 0 = 2010 1 = 2011 2 = 2012 3 = 2013 4 = 2014 2nd and 3rd digit = Week of the Year 01 = 1st week of the Year to 52 = 52nd week of the Year st Storage Tantalum chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. In addition, packaging materials will be degraded by high temperature- reels may soften or warp and tape peel force may increase. KEMET recommends that maximum storage temperature not exceed 40C and maximum storage humidity not exceed 60% relative humidity. Temperature fluctuations should be minimized to avoid condensation on the parts and atmospheres should be free of chlorine and sulphur bearing compounds. For optimized solderability chip stock should be used promptly, preferably within three years of receipt. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2011_T497 * 7/19/2013 12 Tantalum Surface Mount Capacitors High Reliability COTS (CWR09/19/29 Style) - T497 High Grade COTS MnO2 Series Tape & Reel Packaging Information KEMET's molded tantalum and aluminum chip capacitor families are packaged in 8 and 12 mm plastic tape on 7" and 13" reels in accordance with EIA Standard 481-1: Embossed Carrier Taping of Surface Mount Components for Automatic Handling. This packaging system is compatible with all tape-fed automatic pick-and-place systems. 8 mm (0.315") or 12 mm (0.472") Top Tape Thickness 0.10 mm (0.004") Maximum Thickness 180 mm (7.0") or 330 mm (13.0") Table 3 - Packaging Quantity KEMET Case Codes A B C D E F G H X 1005 1505 2005 1510 2010 2214 2711 2915 2824 Tape Width (mm) 8 12 12 12 12 12 12 12 12 Tape and Reel Dimensions 180 mm 330 mm (7" diameter) (13" diameter) 2500 2500 2500 2500 2500 1000 500 500 500 9500 9500 9500 9500 9500 3500 2500 2500 2500 (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2011_T497 * 7/19/2013 13 Tantalum Surface Mount Capacitors High Reliability COTS (CWR09/19/29 Style) - T497 High Grade COTS MnO2 Series Figure 1 - Embossed (Plastic) Carrier Tape Dimensions P2 T T2 ODo Po [10 pitches cumulative tolerance on tape 0.2 mm] E1 Ao F Ko B1 E2 Bo S1 W P1 T1 Center Lines of Cavity OD 1 Cover Tape B 1 is for tape feeder reference only, including draft concentric about B o. Embossment For cavity size, see Note 1 Table 4 User Direction of Unreeling Table 4 - Embossed (Plastic) Carrier Tape Dimensions Metric will govern Constant Dimensions -- Millimeters (Inches) Tape Size D0 8 mm 12 mm 1.5 +0.10/-0.0 (0.059 +0.004/-0.0) 16 mm D1 Minimum Note 1 1.0 (0.039) 1.5 (0.059) E1 P0 P2 1.75 0.10 (0.069 0.004) 4.0 0.10 (0.157 0.004) 2.0 0.05 (0.079 0.002) R Reference Note 2 25.0 (0.984) 30 (1.181) S1 Minimum Note 3 T Maximum T1 Maximum 0.600 (0.024) 0.600 (0.024) 0.100 (0.004) Variable Dimensions -- Millimeters (Inches) Tape Size Pitch 8 mm Single (4 mm) 12 mm Single (4 mm) & Double (8 mm) 16 mm Triple (12 mm) B1 Maximum Note 4 4.35 (0.171) 8.2 (0.323) 12.1 (0.476) E2 Minimum F P1 T2 Maximum W Maximum A0,B0 & K0 6.25 (0.246) 10.25 (0.404) 14.25 (0.561) 3.5 0.05 (0.138 0.002) 5.5 0.05 (0.217 0.002) 5.5 0.05 (0.217 0.002) 4.0 0.10 (0.157 0.004) 8.0 0.10 (0.315 0.004) 8.0 0.10 (0.315 0.004) 2.5 (0.098) 4.6 (0.181) 4.6 (0.181) 8.3 (0.327) 12.3 (0.484) 16.3 (0.642) Note 5 1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and hole location shall be applied independent of each other. 2. The tape, with or without components, shall pass around R without damage (see Figure 5). 3. If S1 < 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481-D, paragraph 4.3, section b). 4. B1 dimension is a reference dimension for tape feeder clearance only. 5. The cavity defined by A0, B0 and K0 shall surround the component with sufficient clearance that: (a) the component does not protrude above the top surface of the carrier tape. (b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed. (c) rotation of the component is limited to 20 maximum for 8 and 12 mm tapes and 10 maximum for 16 mm tapes (see Figure 2). (d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape and to 1.0 mm maximum for 16 mm tape (see Figure 3). (e) see Addendum in EIA Standard 481-D for standards relating to more precise taping requirements. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2011_T497 * 7/19/2013 14 Tantalum Surface Mount Capacitors High Reliability COTS (CWR09/19/29 Style) - T497 High Grade COTS MnO2 Series Packaging Information Performance Notes 1. Cover Tape Break Force: 1.0 Kg minimum. 2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be: Tape Width Peel Strength 8 mm 0.1 to 1.0 Newton (10 to 100 gf) 12 and 16 mm 0.1 to 1.3 Newton (10 to 130 gf) The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165 to 180 from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 10 mm/minute. 3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA Standards 556 and 624. Figure 2 - Maximum Component Rotation T Maximum Component Rotation Top View Maximum Component Rotation Side View Typical Pocket Centerline Tape Width (mm) 8,12 16 - 200 Bo Maximum Rotation ( 20 10 T) Typical Component Centerline Ao Figure 3 - Maximum Lateral Movement 8 mm & 12 mm Tape 0.5 mm maximum 0.5 mm maximum 16 mm Tape s Tape Maximum Width (mm) Rotation ( 8,12 20 16 - 56 10 72 - 200 5 S) Figure 4 - Bending Radius Embossed Carrier Punched Carrier 1.0 mm maximum 1.0 mm maximum R Bending Radius (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com R T2011_T497 * 7/19/2013 15 Tantalum Surface Mount Capacitors High Reliability COTS (CWR09/19/29 Style) - T497 High Grade COTS MnO2 Series Figure 5 - Reel Dimensions Full Radius, See Note W3 (Includes Access Hole at Slot Location (O 40 mm minimum) flange distortion at outer edge) W2 (Measured at hub) D A (See Note) N C (Arbor hole diameter) B (see Note) W1 (Measured at hub) If present, tape slot in core for tape start: 2.5 mm minimum width x 10.0 mm minimum depth Note: Drive spokes optional; if used, dimensions B and D shall apply. Table 5 - Reel Dimensions Metric will govern Constant Dimensions -- Millimeters (Inches) Tape Size A B Minimum C D Minimum 8 mm 178 0.20 (7.008 0.008) or 330 0.20 (13.000 0.008) 1.5 (0.059) 13.0 +0.5/-0.2 (0.521 +0.02/-0.008) 20.2 (0.795) 12 mm 16 mm Variable Dimensions -- Millimeters (Inches) Tape Size N Minimum W1 W2 Maximum W3 50 (1.969) 8.4 +1.5/-0.0 (0.331 +0.059/-0.0) 12.4 +2.0/-0.0 (0.488 +0.078/-0.0) 16.4 +2.0/-0.0 (0.646 +0.078/-0.0) 14.4 (0.567) 18.4 (0.724) 22.4 (0.882) Shall accommodate tape width without interference 8 mm 12 mm 16 mm (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2011_T497 * 7/19/2013 16 Tantalum Surface Mount Capacitors High Reliability COTS (CWR09/19/29 Style) - T497 High Grade COTS MnO2 Series Figure 6 - Tape Leader & Trailer Dimensions Embossed Carrier Carrier Tape Punched Carrier 8 mm & 12 mm only END Round Sprocket Holes START Top Cover Tape Elongated Sprocket Holes (32 mm tape and wider) Trailer 160 mm Minimum Components 100 mm Minimum Leader 400 mm Minimum Top Cover Tape Figure 7 - Maximum Camber Elongated sprocket holes (32 mm & wider tapes) Carrier Tape Round Sprocket Holes 1 mm Maximum, either direction Straight Edge 250 mm (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2011_T497 * 7/19/2013 17 Tantalum Surface Mount Capacitors High Reliability COTS (CWR09/19/29 Style) - T497 High Grade COTS MnO2 Series KEMET Corporation World Headquarters Europe Asia Southern Europe Paris, France Tel: 33-1-4646-1006 Northeast Asia Hong Kong Tel: 852-2305-1168 Mailing Address: P.O. Box 5928 Greenville, SC 29606 Sasso Marconi, Italy Tel: 39-051-939111 Shenzhen, China Tel: 86-755-2518-1306 www.kemet.com Tel: 864-963-6300 Fax: 864-963-6521 Central Europe Landsberg, Germany Tel: 49-8191-3350800 Corporate Offices Fort Lauderdale, FL Tel: 954-766-2800 Kamen, Germany Tel: 49-2307-438110 North America Northern Europe Bishop's Stortford, United Kingdom Tel: 44-1279-460122 2835 KEMET Way Simpsonville, SC 29681 Southeast Lake Mary, FL Tel: 407-855-8886 Espoo, Finland Tel: 358-9-5406-5000 Northeast Wilmington, MA Tel: 978-658-1663 Beijing, China Tel: 86-10-5829-1711 Shanghai, China Tel: 86-21-6447-0707 Taipei, Taiwan Tel: 886-2-27528585 Southeast Asia Singapore Tel: 65-6586-1900 Penang, Malaysia Tel: 60-4-6430200 Bangalore, India Tel: 91-806-53-76817 Central Novi, MI Tel: 248-994-1030 West Milpitas, CA Tel: 408-433-9950 Mexico Guadalajara, Jalisco Tel: 52-33-3123-2141 Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of KEMET Electronics Corporation. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2011_T497 * 7/19/2013 18 Tantalum Surface Mount Capacitors High Reliability COTS (CWR09/19/29 Style) - T497 High Grade COTS MnO2 Series Other KEMET Resources Tools Resource Location Configure A Part: CapEdge http://capacitoredge.kemet.com SPICE & FIT Software http://www.kemet.com/spice Search Our FAQs: KnowledgeEdge http://www.kemet.com/keask Electrolytic LifeCalculator http://www.kemet.com:8080/elc Product Information Resource Location Products Technical Resources (Including Soldering Techniques) RoHS Statement Quality Documents http://www.kemet.com/products http://www.kemet.com/technicalpapers http://www.kemet.com/rohs http://www.kemet.com/qualitydocuments Product Request Resource Location Sample Request Engineering Kit Request http://www.kemet.com/sample http://www.kemet.com/kits Contact Resource Location Website Contact Us Investor Relations www.kemet.com http://www.kemet.com/contact http://www.kemet.com/ir Call Us 1-877-MyKEMET Twitter http://twitter.com/kemetcapacitors Disclaimer All product specifications, statements, information and data (collectively, the "Information") in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation's ("KEMET") knowledge of typical operating conditions for such applications, but are not intended to constitute - and KEMET specifically disclaims - any warranty concerning suitability for a specific customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET's products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2011_T497 * 7/19/2013 19 Tantalum Surface Mount Capacitors High Reliability COTS (CWR09/19/29 Style) - T497 High Grade COTS MnO2 Series Digitally signed by Jeannette Calvo DN: c=US, st=FL, l=Fort Lauderdale, o=KEMET Corp., ou=Marketing Communications, cn=Jeannette Calvo, email=jeannettecalvo@kemet.com Date: 2013.07.26 12:06:17 -04'00' (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2011_T497 * 7/19/2013 20