© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2011_T497 • 7/19/2013 1
One world. One KEMET
Benets
Established reliability options
Taped and reeled per EIA 481–1
Symmetrical, compliant terminations
Laser-marked case
100% surge current test available on all case sizes
Termination options B, H, and T
Weibull failure options B and C
Voltage rating of 4 – 50 VDC
• Operatingtemperaturerangeof-55˚Cto+125˚C
• Capacitancevaluesof0.1μFto150μF
100% thermal shock
Applications
Typicalapplicationsincludedecouplingandlteringinmilitary,
medical, and aerospace applications.
Overview
The KEMET T497 Series is designed for the COTS (Commercial
Off-the-Shelf) requirements of military, medical, and aerospace
applications. This product is a COTS version of CWR09, 19, and
29 products. The T497 Series is a surface mount product offering
various lead-frame plating options, Weibull grading options, X-ray
inspection,surgecurrenttesting,andothercustomer-dened
testing options.
High Reliability COTS (CWR09/19/29 Style)
T497 High Grade COTS MnO2 Series
Environmental Compliance
RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder.
SPICE
Foradetailedanalysisofspecicpartnumbers,pleasevisitwww.kemet.comforafreedownloadofKEMET'sSPICEsoftware.
The KEMET SPICE program is freeware intended to aid design engineers in analyzing the performance of these capacitors over
frequency, temperature, ripple, and DC bias conditions.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2011_T497 • 7/19/2013 22
Tantalum Surface Mount Capacitors
High Reliability COTS (CWR09/19/29 Style) – T497 High Grade COTS MnO2 Series
Ordering Information
T497 G226 K020 A H 6110
Capacitor
Class Series Case Size Capacitance
Code(pF)
Capacitance
Tolerance Voltage FailureRate/
Design Lead Material Performance Options
T =
Tantalum
High Grade
COTS
A, B, C,
D,E,F,G,
H, X
Firsttwodigits
represent
signicantgures.
Thirddigitspecies
number of zeros.
K = ±10%
M = ±20%
004 = 4 V
006 = 6.3 V
010 = 10 V
016 = 16 V
020 = 20 V
025 = 25 V
035 = 35 V
050 = 50 V
A = N/A
B = 0.1%/1,000
hours
C =
0.01%/1,000
hours
T = 100% Matte Tin
(Sn) Plated
H = Standard Solder
Coated (SnPb 5%
Pb minimum)
B = Gold Plated
6110 = Standard features
6115 = No surge, 100% X-ray,
6210 Surge = 10 cycles 25°C,
6215 Surge = 10 cycles 25°C,
100% X-ray
6410 Surge = 10 cycles -55°C
and 85°C
6415 Surge = 10 cycles -55°C
and 85°C, 100% X-ray
Performance Characteristics
Item
Performance Characteristics
Operating Temperature -55°C to 125°C
Rated Capacitance Range 0.1µF–150µF@120Hz/25°C
Capacitance Tolerance K Tolerance (10%), M Tolerance (20%)
Rated Voltage Range 4 V – 50 V
DF(120Hz) RefertoPartNumberElectricalSpecicationTable
ESR (100 kHz) RefertoPartNumberElectricalSpecicationTable
Leakage Current ≤0.01CV(µA)atratedvoltageafter5minutes
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2011_T497 • 7/19/2013 33
Tantalum Surface Mount Capacitors
High Reliability COTS (CWR09/19/29 Style) – T497 High Grade COTS MnO2 Series
Qualication
Test Condition Characteristics
Endurance 105°C@ratedvoltage,2,000hours
125°C@2/3ratedvoltage,2,000hours
ΔC/C Within-20%/+10%ofinitialvalue
DF ≤InitialLimit
DCL 2xIL@125ºC
ESR 2 x Initial Limit
Storage Life 125°C@0volts,2,000hours
ΔC/C
Within-20%/+10%ofinitialvalue
DF Within initial limits
DCL Within 2.0 x initial limit
ESR Within 2.0 x initial limit
Humidity 85°C, 85% RH, 1,000 hours No Load
ΔC/C Within-5%/+35%ofinitialvalue
DF ≤InitialLimit
DCL Within 3.0 x initial limit
Temperature Stability
Extreme temperature exposure at a
successionofcontinuousstepsat+25ºC,
-55ºC,+25ºC,+8C,+125ºC,+25ºC
+2C
-55°C
+125°C
ΔC/C I L* ±20% ±20% ±30%
DF IL IL 1.2 x IL 1.5 x IL
DCL IL n/a 10 x IL 10 x IL
Surge Voltage 105°C, 1.32 x rated voltage 1,000 cycles
ΔC/C Within-20%/+10%ofinitialvalue
DF Within initial limits
DCL Within initial limits
ESR Within initial limits
Mechanical Shock/Vibration
MIL–STD–202, Method 213, Condition I, 100 G peak
MIL–STD–202, Method 204, Condition D, 10 Hz to 2,000 Hz,
20 G peak
ΔC/C Within ±10% of initial value
DF Within initial limits
DCL Within initial limits
*IL = Initial limit
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2011_T497 • 7/19/2013 44
Tantalum Surface Mount Capacitors
High Reliability COTS (CWR09/19/29 Style) – T497 High Grade COTS MnO2 Series
Electrical Characteristics
Capacitancevs.Frequency
0
1
10
100
1,000
100 1,000 10,000 100,000 1,000,000 10,000,000
Capacitance (µF)
Frequency (Hz)
T497D106/15
T497F336/15
T497H107/15
ESRvs.Frequency
0.1
1
10
100
1000
100 1,000 10,000 100,000 1,000,000 10,000,000
Impedance, ESR (Ohms)
Frequency (Hz)
T497D106/15_IMP
T497F336/15_IMP
T497H107/15_IMP
T497D106/15_ESR
T497F336/15_ESR
T497F107/15_ESR
Dimensions – Millimeters (Inches)
Metric will govern
Case Size Component
KEMET L* ±0.38 (0.015) W* ±0.38 (0.015) H* ±0.38 (0.015)
P+0.25(0.010),
-0.13 (0.005)
W2H2 Minimum
A2.54 (.100) 1.27 (.050) 1.27 (.050) 0.76 (.030)
1.27 ±0.13
(0.050 ±0.005)
0.76 (0.030)
B3.81 (.150) 1.27 (.050) 1.27 (.050) 0.76 (.030)
1.27 ±0.13
(0.050 ±0.005)
0.76 (0.030)
C5.08 (.200) 1.27 (.050) 1.27 (.050) 0.76 (.030)
1.27 ±0.13
(0.050 ±0.005)
0.76 (0.030)
D3.81 (.150) 2.54 (.100) 1.27 (.050) 0.76 (.030)
2.41+0.13,-0.25
(0.095+0.005,-0.010)
0.76 (0.030)
E5.08 (.200) 2.54 (.10 0) 1.27 (.050) 0.76 (.030)
2.41+0.13,-0.25
(0.095+0.005,-0.010)
0.76 (0.030)
F5.59 (.220) 3.43 (.135) 1.78 (.070) 0.76 (.030)
3.30 ±0.13
(0.130 ±0.005)
1.02 (0.040)
G6.73 (.265) 2.79 (.110) 2.79 (.110) 1.27 (.050)
2.67 ±0.13
(0.105 ±0.005)
1.52 (0.060)
H7.24 (.285) 3.81 (.150) 2.79 (.110) 1.27 (.050)
3.68+0.013,-0.51
(0.145+0.005,-0.020)
1.52 (0.060)
X6.93 (.273) 5.41 (.213) 2.74 (.108) 1.19 (.047)
3.05 ±0.13
(0.120 ±0.005)
1.22 (0.048)
Note: When solder coated terminations are required, add an additional 0.38 mm (0.015 inch) to the above tolerances for "L", "W", "H", "P" ,"W2" and "H2"
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2011_T497 • 7/19/2013 55
Tantalum Surface Mount Capacitors
High Reliability COTS (CWR09/19/29 Style) – T497 High Grade COTS MnO2 Series
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR Moisture
Sensitivity
VDC µF KEMET/EIA
(See below for
part options)
µA @ +2C
Maximum/5 Min
% @ 20ºC 120 Hz
Maximum
Ω @ +20ºC 100 kHz
Maximum
Reow Temperature
≤ 260ºC
44.7 A/1005 T497A475(1)004(2)(3) 0.2 6.0 12.0 1.0
44.7 B/1505 T497B475(1)004(2)(3) 0.2 6.0 8.0 1.0
415 B/1505 T497B156(1)004(2)(3) 0.6 8.0 8.0 1.0
433 D/1510 T497D336(1)004(2)(3) 1.3 8.0 4.0 1.0
433 F/2214 T497F336(1)004(2)(3) 1.3 8.0 2.2 1.0
468 E/2010 T497E686(1)004(2)(3) 2.7 8.0 3.0 1.0
468 F/2214 T497F686(1)004(2)(3) 2.7 6.0 2.0 1.0
468 G/2711 T497G686(1)004(2)(3) 2.7 10.0 1.1 1.0
4100 H/2915 T497H107(1)004(2)(3) 4.0 10.0 0.9 1.0
6.3 1.5 A/1005 T497A155(1)006(2)(3) 0.1 6.0 8.0 1.0
6.3 2.2 A/1005 T497A225(1)006(2)(3) 0.1 6.0 10.0 1.0
6.3 3.3 A/1005 T497A335(1)006(2)(3) 0.2 6.0 12.0 1.0
6.3 3.3 B/1505 T497B335(1)006(2)(3) 0.2 6.0 8.0 1.0
6.3 4.7 A/1005 T497A475(1)006(2)(3) 0.3 6.0 12.0 1.0
6.3 4.7 D/1510 T497D475(1)006(2)(3) 0.3 6.0 5.5 1.0
6.3 6.8 B/1505 T497B685(1)006(2)(3) 0.4 6.0 8.0 1.0
6.3 6.8 D/1510 T497D685(1)006(2)(3) 0.4 6.0 4.5 1.0
6.3 10 B/1505 T497B106(1)006(2)(3) 0.6 6.0 8.0 1.0
6.3 10 E/2010 T497E106(1)006(2)(3) 0.6 8.0 3.5 1.0
6.3 15 B/1505 T497B156(1)006(2)(3) 0.9 8.0 8.0 1.0
6.3 15 D/1510 T497D156(1)006(2)(3) 0.9 8.0 5.0 1.0
6.3 22 D/1510 T497D226(1)006(2)(3) 1.4 6.0 5.0 1.0
6.3 22 E/2010 T497E226(1)006(2)(3) 1.4 8.0 3.5 1.0
6.3 22 F/2214 T497F226(1)006(2)(3) 1.4 8.0 2.2 1.0
6.3 33 E/2010 T497E336(1)006(2)(3) 2.1 6.0 3.5 1.0
6.3 47 F/2214 T497F476(1)006(2)(3) 3.0 8.0 3.5 1.0
6.3 47 G/2711 T497G476(1)006(2)(3) 3.0 10.0 1.1 1.0
6.3 68 F/2214 T497F686(1)006(2)(3) 4.3 10.0 1.5 1.0
6.3 68 H/2915 T497H686(1)006(2)(3) 4.3 10.0 0.9 1.0
6.3 100 G/2711 T497G107(1)006(2)(3) 6.3 10.0 1.1 1.0
6.3 150 G/2711 T497G157(1)006(2)(3) 9.5 10.0 1.1 1.0
6.3 150 H/2915 T497H157(1)006(2)(3) 9.5 10.0 0.9 1.0
10 0.47 A/1005 T497A474(1)010(2)(3) 0.0 6.0 10.0 1.0
10 1A/1005 T497A105(1)010(2)(3) 0.1 6.0 10.0 1.0
10 1.5 A/1005 T497A155(1)010(2)(3) 0.2 6.0 10.0 1.0
10 2.2 A/1005 T497A225(1)010(2)(3) 0.2 6.0 12.0 1.0
10 2.2 B/1505 T497B225(1)010(2)(3) 0.2 6.0 8.0 1.0
10 3.3 A/1005 T497A335(1)010(2)(3) 0.3 6.0 12.0 1.0
10 3.3 B/1505 T497B335(1)010(2)(3) 0.3 6.0 10.0 1.0
10 4.7 B/1505 T497B475(1)010(2)(3) 0.5 6.0 8.0 1.0
10 4.7 D/1510 T497D475(1)010(2)(3) 0.5 6.0 4.5 1.0
10 6.8 B/1505 T497B685(1)010(2)(3) 0.7 6.0 8.0 1.0
10 6.8 F/2214 T497F685(1)010(2)(3) 0.7 6.0 5.0 1.0
10 6.8 E/2010 T497E685(1)010(2)(3) 0.7 6.0 3.5 1.0
10 10 B/1505 T497B106(1)010(2)(3) 1.0 8.0 8.0 1.0
10 10 D/1510 T497D106(1)010(2)(3) 1.0 6.0 4.0 1.0
10 10 E/2010 T497E106(1)010(2)(3) 1.0 6.0 3.5 1.0
10 15 D/1510 T497D156(1)010(2)(3) 1.5 6.0 5.0 1.0
VDC µF KEMET/EIA
(See below for
part options)
µA @ +2C
Maximum/5 Min
% @ 20ºC 120 Hz
Maximum
Ω @ +20ºC 100 kHz
Maximum
Reow Temperature
≤ 260ºC
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR Moisture
Sensitivity
Table 1 – Ratings & Part Number Reference
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance.
(2) To complete KEMET part number, insert B (0.1%/1,000 hours), C (0.01%/1,000 hours) or A = N/A. Designates Reliability Level.
(3) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, B = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates
Termination Finish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked
with the higher voltage rating. Substitutions can include better than series.
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2011_T497 • 7/19/2013 66
Tantalum Surface Mount Capacitors
High Reliability COTS (CWR09/19/29 Style) – T497 High Grade COTS MnO2 Series
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR Moisture
Sensitivity
VDC µF KEMET/EIA
(See below for
part options)
µA @ +2C
Maximum/5 Min
% @ 20ºC 120 Hz
Maximum
Ω @ +20ºC 100 kHz
Maximum
Reow Temperature
≤ 260ºC
10 15 E/2010 T497E156(1)010(2)(3) 1.5 8.0 3.0 1.0
10 15 F/2214 T497F156(1)010(2)(3) 1.5 8.0 2.5 1.0
10 22 D/1510 T497D226(1)010(2)(3) 2.2 6.0 4.0 1.0
10 22 E/2010 T497E226(1)010(2)(3) 2.2 8.0 2.0 1.0
10 22 F/2214 T497F226(1)010(2)(3) 2.2 8.0 1.5 1.0
10 22 G/2711 T497G226(1)010(2)(3) 2.2 8.0 1.5 1.0
10 33 F/2214 T497F336(1)010(2)(3) 3.3 8.0 1.5 1.0
10 33 G/2711 T497G336(1)010(2)(3) 3.3 10.0 1.5 1.0
10 47 F/2214 T497F476(1)010(2)(3) 4.7 10.0 1.5 1.0
10 47 G/2711 T497G476(1)010(2)(3) 4.7 10.0 1.0 1.0
10 47 H/2915 T497H476(1)010(2)(3) 4.7 10.0 0.9 1.0
10 68 G/2711 T497G686(1)010(2)(3) 6.8 10.0 1.1 1.0
10 100 G/2711 T497G107(1)010(2)(3) 10.0 10.0 1.1 1.0
10 100 H/2915 T497H107(1)010(2)(3) 10.0 10.0 0.9 1.0
10 150 H/2915 T497H157(1)010(2)(3) 15.0 10.0 0.9 1.0
15 0.1 A/1005 T497A104(1)015(2)(3) 0.0 6.0 15.0 1.0
15 0.22 A/1005 T497A224(1)015(2)(3) 0.0 6.0 15.0 1.0
15 0.33 A/1005 T497A334(1)015(2)(3) 0.0 6.0 15.0 1.0
15 0.68 A/1005 T497A684(1)015(2)(3) 0.1 6.0 20.0 1.0
15 1A/1005 T497A105(1)015(2)(3) 0.2 6.0 15.0 1.0
15 1.5 A/1005 T497A155(1)015(2)(3) 0.2 6.0 15.0 1.0
15 1.5 B/1505 T497B155(1)015(2)(3) 0.2 6.0 8.0 1.0
15 2.2 A/1005 T497A225(1)015(2)(3) 0.3 6.0 15.0 1.0
15 3.3 B/1505 T497B335(1)015(2)(3) 0.5 6.0 9.0 1.0
15 3.3 D/1510 T497D335(1)015(2)(3) 0.5 6.0 5.0 1.0
15 4.7 B/1505 T497B475(1)015(2)(3) 0.7 6.0 5.0 1.0
15 4.7 D/1510 T497D475(1)015(2)(3) 0.7 6.0 6.0 1.0
15 4.7 E/2010 T497E475(1)015(2)(3) 0.7 6.0 4.0 1.0
15 6.8 D/1510 T497D685(1)015(2)(3) 1.0 6.0 6.0 1.0
15 10 D/1510 T497D106(1)015(2)(3) 1.5 6.0 6.0 1.0
15 10 E/2010 T497E106(1)015(2)(3) 1.5 6.0 4.0 1.0
15 10 F/2214 T497F106(1)015(2)(3) 1.5 6.0 2.5 1.0
15 15 E/2010 T497E156(1)015(2)(3) 2.3 6.0 4.0 1.0
15 15 F/2214 T497F156(1)015(2)(3) 2.3 6.0 2.5 1.0
15 22 F/2214 T497F226(1)015(2)(3) 3.3 8.0 3.0 1.0
15 22 G/2711 T497G226(1)015(2)(3) 3.3 6.0 1.1 1.0
15 33 F/2214 T497F336(1)015(2)(3) 5.0 6.0 3.0 1.0
15 33 H/2915 T497H336(1)015(2)(3) 5.0 8.0 0.9 1.0
15 47 G/2711 T497G476(1)015(2)(3) 7.1 8.0 1.1 1.0
15 68 H/2915 T497H686(1)015(2)(3) 10.2 8.0 0.9 1.0
15 100 H/2915 T497H107(1)015(2)(3) 15.0 10.0 0.9 1.0
20 0.15 A/1005 T497A154(1)020(2)(3) 0.0 8.0 15.0 1.0
20 0.47 A/1005 T497A474(1)020(2)(3) 0.1 8.0 14.0 1.0
20 0.68 A/1005 T497A684(1)020(2)(3) 0.1 6.0 15.0 1.0
20 0.68 B/1505 T497B684(1)020(2)(3) 0.1 6.0 10.0 1.0
20 1A/1005 T497A105(1)020(2)(3) 0.2 6.0 15.0 1.0
20 1B/1505 T497B105(1)020(2)(3) 0.2 6.0 12.0 1.0
20 1.5 B/1505 T497B155(1)020(2)(3) 0.3 6.0 9.0 1.0
VDC µF KEMET/EIA
(See below for
part options)
µA @ +2C
Maximum/5 Min
% @ 20ºC 120 Hz
Maximum
Ω @ +20ºC 100 kHz
Maximum
Reow Temperature
≤ 260ºC
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR Moisture
Sensitivity
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance.
(2) To complete KEMET part number, insert B (0.1%/1,000 hours), C (0.01%/1,000 hours) or A = N/A. Designates Reliability Level.
(3) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, B = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates
Termination Finish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked
with the higher voltage rating. Substitutions can include better than series.
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2011_T497 • 7/19/2013 77
Tantalum Surface Mount Capacitors
High Reliability COTS (CWR09/19/29 Style) – T497 High Grade COTS MnO2 Series
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR Moisture
Sensitivity
VDC µF KEMET/EIA
(See below for
part options)
µA @ +2C
Maximum/5 Min
% @ 20ºC 120 Hz
Maximum
Ω @ +20ºC 100 kHz
Maximum
Reow Temperature
≤ 260ºC
20 2.2 B/1505 T497B225(1)020(2)(3) 0.4 6.0 9.0 1.0
20 2.2 D/1510 T497D225(1)020(2)(3) 0.4 6.0 5.0 1.0
20 3.3 D/1510 T497D335(1)020(2)(3) 0.7 6.0 6.0 1.0
20 3.3 E/2010 T497E335(1)020(2)(3) 0.7 6.0 4.0 1.0
20 4.7 E/2010 T497E475(1)020(2)(3) 0.9 6.0 6.0 1.0
20 4.7 F/2214 T497F475(1)020(2)(3) 0.9 6.0 4.0 1.0
20 6.8 D/1510 T497D685(1)020(2)(3) 1.4 6.0 5.0 1.0
20 6.8 E/2010 T497E685(1)020(2)(3) 1.4 6.0 5.0 1.0
20 6.8 F/2214 T497F685(1)020(2)(3) 1.4 6.0 2.4 1.0
20 10 F/2214 T497F106(1)020(2)(3) 2.0 6.0 3.0 1.0
20 15 F/2214 T497F156(1)020(2)(3) 3.0 6.0 3.0 1.0
20 15 G/2711 T497G156(1)020(2)(3) 3.0 6.0 1.1 1.0
20 22 G/2711 T497G226(1)020(2)(3) 4.4 6.0 2.5 1.0
20 22 H/2915 T497H226(1)020(2)(3) 4.4 6.0 0.9 1.0
20 33 H/2915 T497H336(1)020(2)(3) 6.6 8.0 0.9 1.0
20 47 H/2915 T497H476(1)020(2)(3) 9.4 8.0 0.9 1.0
25 0.33 A/1005 T497A334(1)025(2)(3) 0.1 6.0 15.0 1.0
25 0.47 A/1005 T497A474(1)025(2)(3) 0.1 6.0 15.0 1.0
25 0.68 B/1505 T497B684(1)025(2)(3) 0.2 6.0 7.5 1.0
25 1B/1505 T497B105(1)025(2)(3) 0.3 6.0 10.0 1.0
25 1C/2005 T497C105(1)025(2)(3) 0.3 6.0 6.5 1.0
25 1.5 D/1510 T497D155(1)025(2)(3) 0.4 6.0 6.5 1.0
25 2.2 D/1510 T497D225(1)025(2)(3) 0.6 6.0 6.0 1.0
25 2.2 E/2010 T497E225(1)025(2)(3) 0.6 6.0 3.5 1.0
25 3.3 E/2010 T497E335(1)025(2)(3) 0.8 6.0 4.0 1.0
25 4.7 F/2214 T497F475(1)025(2)(3) 1.2 6.0 2.5 1.0
25 6.8 F/2214 T497F685(1)025(2)(3) 1.7 6.0 3.0 1.0
25 6.8 G/2711 T497G685(1)025(2)(3) 1.7 6.0 1.2 1.0
25 10 F/2214 T497F106(1)025(2)(3) 2.5 6.0 2.5 1.0
25 10 G/2711 T497G106(1)025(2)(3) 2.5 6.0 1.4 1.0
25 15 G/2711 T497G156(1)025(2)(3) 3.8 6.0 1.4 1.0
25 15 H/2915 T497H156(1)025(2)(3) 3.8 6.0 1.0 1.0
25 22 G/2711 T497G226(1)025(2)(3) 5.5 6.0 1.4 1.0
25 22 H/2915 T497H226(1)025(2)(3) 5.5 6.0 0.9 1.0
25 22 X/2824 T497X226(1)025(2)(3) 5.5 6.0 0.9 1.0
25 33 H/2915 T497H336(1)025(2)(3) 8.3 8.0 0.9 1.0
25 33 X/2824 T497X336(1)025(2)(3) 8.3 8.0 0.9 1.0
35 0.22 A/1005 T497A224(1)035(2)(3) 0.1 6.0 18.0 1.0
35 0.33 A/1005 T497A334(1)035(2)(3) 0.1 6.0 22.0 1.0
35 0.47 B/1505 T497B474(1)035(2)(3) 0.2 6.0 10.0 1.0
35 0.68 C/2005 T497C684(1)035(2)(3) 0.2 6.0 8.0 1.0
35 1D/1510 T497D105(1)035(2)(3) 0.4 6.0 6.5 1.0
35 1.5 E/2010 T497E155(1)035(2)(3) 0.5 6.0 4.5 1.0
35 3.3 F/2214 T497F335(1)035(2)(3) 1.2 6.0 2.5 1.0
35 4.7 G/2711 T497G475(1)035(2)(3) 1.6 6.0 1.5 1.0
35 6.8 G/2711 T497G685(1)035(2)(3) 2.4 6.0 1.3 1.0
35 6.8 H/2915 T497H685(1)035(2)(3) 2.4 6.0 1.3 1.0
35 10 H/2915 T497H106(1)035(2)(3) 3.5 8.0 0.9 1.0
VDC µF KEMET/EIA
(See below for
part options)
µA @ +2C
Maximum/5 Min
% @ 20ºC 120 Hz
Maximum
Ω @ +20ºC 100 kHz
Maximum
Reow Temperature
≤ 260ºC
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR Moisture
Sensitivity
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance.
(2) To complete KEMET part number, insert B (0.1%/1,000 hours), C (0.01%/1,000 hours) or A = N/A. Designates Reliability Level.
(3) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, B = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates
Termination Finish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked
with the higher voltage rating. Substitutions can include better than series.
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2011_T497 • 7/19/2013 88
Tantalum Surface Mount Capacitors
High Reliability COTS (CWR09/19/29 Style) – T497 High Grade COTS MnO2 Series
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR Moisture
Sensitivity
VDC µF KEMET/EIA
(See below for
part options)
µA @ +2C
Maximum/5 Min
% @ 20ºC 120 Hz
Maximum
Ω @ +20ºC 100 kHz
Maximum
Reow Temperature
≤ 260ºC
35 15 X/2824 T497X156(1)035(2)(3) 5.3 6.0 0.9 1.0
50 0.1 A/1005 T497A104(1)050(2)(3) 0.1 6.0 22.0 1.0
50 0.15 A/1005 T497A154(1)050(2)(3) 0.1 6.0 17.0 1.0
50 0.22 B/1505 T497B224(1)050(2)(3) 0.1 6.0 14.0 1.0
50 0.33 B/1505 T497B334(1)050(2)(3) 0.2 6.0 12.0 1.0
50 0.47 C/2005 T497C474(1)050(2)(3) 0.2 6.0 8.0 1.0
50 0.68 D/1510 T497D684(1)050(2)(3) 0.3 6.0 7.0 1.0
50 1E/2010 T497E105(1)050(2)(3) 0.5 6.0 6.0 1.0
50 1.5 F/2214 T497F155(1)050(2)(3) 0.8 6.0 4.0 1.0
50 2.2 F/2214 T497F225(1)050(2)(3) 1.1 6.0 2.5 1.0
50 3.3 G/2711 T497G335(1)050(2)(3) 1.7 6.0 2.0 1.0
50 4.7 H/2915 T497H475(1)050(2)(3) 2.4 6.0 1.5 1.0
VDC µF KEMET/EIA
(See below for
part options)
µA @ +2C
Maximum/5 Min
% @ 20ºC 120 Hz
Maximum
Ω @ +20ºC 100 kHz
Maximum
Reow Temperature
≤ 260ºC
Rated
Voltage
Rated
Capacitance
Case Code/
Case Size KEMET Part Number DC
Leakage DF ESR Moisture
Sensitivity
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance.
(2) To complete KEMET part number, insert B (0.1%/1,000 hours), C (0.01%/1,000 hours) or A = N/A. Designates Reliability Level.
(3) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, B = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates
Termination Finish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked
with the higher voltage rating. Substitutions can include better than series.
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2011_T497 • 7/19/2013 99
Tantalum Surface Mount Capacitors
High Reliability COTS (CWR09/19/29 Style) – T497 High Grade COTS MnO2 Series
Recommended Voltage Derating Guidelines
-55°C to 85°C 85°C to 125°C
% Change in Working DC
Voltage with Temperature
VR67% of VR
Recommended Maximum
Application Voltage
50% of VR33% of VR
Ripple Current/Ripple Voltage
Permissible AC ripple voltage and current are related to equivalent
series resistance (ESR) and the power dissipation capabilities of
the device. Permissible AC ripple voltage which may be applied is
limited by two criteria:
1. The positive peak AC voltage plus the DC bias voltage, if any,
must not exceed the DC voltage rating of the capacitor.
2. The negative peak AC voltage in combination with bias
voltage,ifany,mustnotexceedtheallowablelimitsspeciedfor
reverse voltage. See the Reverse Voltage section for allowable
limits.
The maximum power dissipation by case size can be determined
using the table at right. The maximum power dissipation rating
stated in the table must be reduced with increasing environmental
operating temperatures. Refer to the table below for temperature
compensation requirements.
Temperature Compensation Multipliers
for Maximum Power Dissipation
≤25°C
85°C
12C
1.00
0.90
0.40
T= Environmental Temperature
Using the P max of the device, the maximum allowable rms ripple
current or voltage may be determined.
I(max) = √P max/R
E(max) = Z √P max/R
I = rms ripple current (amperes)
E = rms ripple voltage (volts)
P max = maximum power dissipation (watts)
KEMET
Case Code
EIA
Case Code
Maximum Power
Dissipation (P max)
mWatts @ 25°C
w/+20°C Rise
A
1005
50
B
1505
70
C
2005
75
D
1510
80
E
2010
90
F
2214
100
G
2711
125
H
2915
150
The maximum power dissipation rating must be reduced with increasing
environmental operating temperatures. Refer to the Temperature Compensation
Multiplier table for details.
0%
20%
40%
60%
80%
100%
120%
-55 25 85 125
% Working Voltage
% Change in Working DC Voltage
with Temperature
Temperature (ºC)
67%
33%
Recommended Maximum
Application Voltage (As %
of Rated Voltage)
R = ESR at specied frequency (ohms)
Z = Impedance at specied frequency (ohms)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2011_T497 • 7/19/2013 1010
Tantalum Surface Mount Capacitors
High Reliability COTS (CWR09/19/29 Style) – T497 High Grade COTS MnO2 Series
Reverse Voltage
Solid tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected with the wrong polarity. The
positiveterminalisidentiedonthecapacitorbodybyastripeplusinsomecasesabevelededge.Asmalldegreeoftransientreverse
voltage is permissible for short periods per the table. The capacitors should not be operated continuously in reverse mode, even within
these limits.
Temperature
Permissible Transient Reverse Voltage
25°C
15% of Rated Voltage
85°C
5% of Rated Voltage
12C
1% of Rated Voltage
Table 2 – Land Dimensions/Courtyard
KEMET
Metric
Size
Code
Density Level A:
Maximum (Most) Land
Protrusion (mm)
Density Level B:
Median (Nominal) Land
Protrusion (mm)
Density Level C:
Minimum (Least) Land
Protrusion (mm)
Case
EIA
L
W
S
V1
V2
L
W
S
V1
V2
L
W
S
V1
V2
1005
2.19
1.44
0.15
5.54
2.66
1.89
1.32
0.15
4.44
2.16
1.52
1.22
0.29
3.58
1.90
B
1505
2.30
1.44
1.20
6.80
2.66
1.90
1.32
1.40
5.70
2.16
1.52
1.22
1.56
4.84
1.90
C
2005
2.30
1.44
2.47
8.08
2.66
1.90
1.32
2.67
6.98
2.16
1.52
1.22
2.83
6.12
1.90
D
1510
2.30
2.58
1.20
6.80
3.92
1.90
2.46
1.40
5.70
3.42
1.52
2.36
1.56
4.84
3.16
E
2010
2.30
2.58
2.47
8.08
3.92
1.90
2.46
2.67
6.98
3.42
1.52
2.36
2.83
6.12
3.16
F
2214
2.30
3.47
2.98
8.58
4.82
1.90
3.35
3.18
7.48
4.32
1.52
3.25
3.34
6.62
4.06
G
2711
2.81
2.84
3.10
9.72
4.18
2.41
2.72
3.30
8.62
3.68
2.03
2.62
3.46
7.76
3.42
H
2915
2.81
3.84
3.61
10.24
5.20
2.41
3.72
3.81
9.14
4.70
2.03
3.62
3.97
8.28
4.44
X
2824
2.73
3.22
3.46
9.92
6.80
2.33
3.10
3.66
8.82
6.30
1.95
3.00
3.82
7.9 6
6.04
Density Level A: For low-density product applications. Recommended for wave solder applications and
provides a wider process window for reow solder processes.
Density Level B: For products with a moderate level of component density. Provides a robust solder
attachment condition for reow solder processes.
Density Level C: For high component desity product applications. Before adapting the minimum land
pattern variations the user should perform qualication testing based on the conditions outlined in IPC
standard 7351 (IPC–7351).
¹ Land pattern geometry is too small for silkscreen outline.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2011_T497 • 7/19/2013 1111
Tantalum Surface Mount Capacitors
High Reliability COTS (CWR09/19/29 Style) – T497 High Grade COTS MnO2 Series
Time
Temperature
T
smin
25ºC to Peak
tL
tS
25
tP
T
smax
TL
TP
Maximum Ramp Up Rate = 3ºC/seconds
Maximum Ramp Down Rate = 6ºC/seconds
Soldering Process
KEMET’s families of surface mount capacitors are compatible
withwave(singleordual),convection,IR,orvaporphasereow
techniques. Preheating of these components is recommended
toavoidextremethermalstress.KEMET'srecommended
proleconditionsforconvectionandIRreowreecttheprole
conditions of the IPC/J–STD–020D standard for moisture
sensitivity testing. The devices can safely withstand a maximum
ofthreereowpassesattheseconditions.
Please note that although the X/7343–43 case size can withstand
wavesoldering,thetallprole(4.3mmmaximum)dictatescarein
wave process development.
Handsolderingshouldbeperformedwithcareduetothedifculty
in process control. If performed, care should be taken to avoid
contact of the soldering iron to the molded case. The iron should
be used to heat the solder pad, applying solder between the pad
andthetermination,untilreowoccurs.Oncereowoccurs,the
iron should be removed immediately. “Wiping” the edges of a chip
and heating the top surface is not recommended.
Duringtypicalreowoperations,aslightdarkeningofthegold-
colored epoxy may be observed. This slight darkening is normal
and not harmful to the product. Marking permanency is not
affected by this change.
Prole Feature SnPb Assembly Pb-Free Assembly
Preheat/Soak
Temperature Minimum (T
Smin
)10C 15C
Temperature Maximum (T
Smax
)15C 200°C
Time (t
s
) from T
smin
to T
smax
) 60 – 120 seconds 60 – 120 seconds
Ramp-up Rate (T
L
to T
P
)3°C/seconds maximum 3°C/seconds maximum
Liquidous Temperature (TL)
183°C
217°C
Time Above Liquidous (t
L
) 60 – 150 seconds 60 – 150 seconds
Peak Temperature (TP)
220°C*
235°C**
250°C*
260°C**
Time within 5°C of Maximum
Peak Temperature (tP)
20 seconds maximum 30 seconds maximum
Ramp-down Rate (TP to TL)
6°C/seconds maximum
6°C/seconds maximum
Time 25°C to Peak Temperature 6 minutes maximum 8 minutes maximum
Note: All temperatures refer to the center of the package, measured on the
package body surface that is facing up during assembly reow.
*Case Size D, E, P, Y, and X
**Case Size A, B, C, H, I, K, M, R, S, T, U, V, W, and Z
Construction
MNO2 /Ta2O5/Ta Silver Adhesive
Carbon
Silver Paint Washer
Tantalum Wire
Weld
Leadframe
(-Cathode) Leadframe
(+Anode)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2011_T497 • 7/19/2013 1212
Tantalum Surface Mount Capacitors
High Reliability COTS (CWR09/19/29 Style) – T497 High Grade COTS MnO2 Series
Capacitor Marking
KEMET
High
Reliability
COTS
Rated
Voltage
156
35 K
230
Polarity
Indicator (+)
Picofarad Code
KEMET ID
Date
Code*
* 230 = 30th week of 2012
Date Code *
1st digit = Last number of Year 9 = 2009
0 = 2010
1 = 2011
2 = 2012
3 = 2013
4 = 2014
2nd and 3rd digit = Week of the Year 01 = 1st week of the Year to
52 = 52nd week of the Year
Storage
Tantalum chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in other
environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term
storage. In addition, packaging materials will be degraded by high temperature– reels may soften or warp and tape peel force may
increase.KEMETrecommendsthatmaximumstoragetemperaturenotexceed40ºCandmaximumstoragehumiditynotexceed60%
relativehumidity.Temperatureuctuationsshouldbeminimizedtoavoidcondensationonthepartsandatmospheresshouldbefreeof
chlorineandsulphurbearingcompounds.Foroptimizedsolderabilitychipstockshouldbeusedpromptly,preferablywithinthreeyears
of receipt.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2011_T497 • 7/19/2013 1313
Tantalum Surface Mount Capacitors
High Reliability COTS (CWR09/19/29 Style) – T497 High Grade COTS MnO2 Series
Tape & Reel Packaging Information
KEMET’s molded tantalum and aluminum chip capacitor families are packaged in 8 and 12 mm plastic tape on 7" and 13" reels in
accordance with EIA Standard 481–1: Embossed Carrier Taping of Surface Mount Components for Automatic Handling. This packaging
system is compatible with all tape-fed automatic pick-and-place systems.
Table 3 – Packaging Quantity
KEMET Case
Codes
Tape
Width
(mm)
Tape and Reel Dimensions
180 mm
(7" diameter)
330 mm
(13" diameter)
A
1005
8
2500
9500
B
1505
12
2500
9500
C
2005
12
2500
9500
D
1510
12
2500
9500
E
2010
12
2500
9500
F
2214
12
1000
3500
G
2711
12
500
2500
H
2915
12
500
2500
X
2824
12
500
2500
Top Tape Thickness
0.10 mm (0.004")
Maximum Thickness
8 mm (0.315")
or
12 mm (0.472") 180 mm (7.0")
or
330 mm (13.0")
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2011_T497 • 7/19/2013 1414
Tantalum Surface Mount Capacitors
High Reliability COTS (CWR09/19/29 Style) – T497 High Grade COTS MnO2 Series
Figure 1 – Embossed (Plastic) Carrier Tape Dimensions
Po
T
F
W
Center Lines of Cavity
Ao
Bo
User Direction of Unreeling
Cover Tape
Ko
B
1
is for tape feeder reference only,
including draft concentric about B
o.
T
2
ØD
1
ØDo
B
1
S
1
T
1
E
1
E
2
P
1
P
2
Embossment
For cavity size,
see Note 1 Table 4
[10 pitches cumulative
tolerance on tape ± 0.2 mm]
Table 4 – Embossed (Plastic) Carrier Tape Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size D0
D
1
Minimum
Note 1
E1P0 P2
R Reference
Note 2
S
1
Minimum
Note 3
T Maximum T1 Maximum
8 mm
1.5+0.10/-0.0
(0.059+0.004/-0.0)
1.0
(0.039)
1.75 ±0.10
(0.069 ±0.004)
4.0 ±0.10
(0.157 ±0.004)
2.0 ±0.05
(0.079 ±0.002)
25.0
(0.984)
0.600
(0.024)
0.600
(0.024)
0.100
(0.004)
12 mm 1.5
(0.059)
30
(1.181)
16 mm
Variable Dimensions — Millimeters (Inches)
Tape Size Pitch
B
1
Maximum
Note 4
E2 Minimum F P1 T2 Maximum W Maximum A0,B0 & K0
8 mm Single (4 mm)
4.35
(0.171)
6.25
(0.246)
3.5 ±0.05
(0.138 ±0.002)
4.0 ±0.10
(0.157 ±0.004)
2.5
(0.098)
8.3
(0.327)
Note 512 mm
Single (4 mm) &
Double (8 mm)
8.2
(0.323)
10.25
(0.404)
5.5 ±0.05
(0.217 ±0.002)
8.0 ±0.10
(0.315 ±0.004)
4.6
(0.181)
12.3
(0.484)
16 mm Triple (12 mm)
12.1
(0.476)
14.25
(0.561)
5.5 ±0.05
(0.217 ±0.002)
8.0 ±0.10
(0.315 ±0.004)
4.6
(0.181)
16.3
(0.642)
1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and
hole location shall be applied independent of each other.
2. The tape, with or without components, shall pass around R without damage (see Figure 5).
3. If S1 < 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481–D, paragraph 4.3, section b).
4. B1 dimension is a reference dimension for tape feeder clearance only.
5. The cavity de ned by A0, B0 and K0 shall surround the component with suf cient clearance that:
(a) the component does not protrude above the top surface of the carrier tape.
(b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed.
(c) rotation of the component is limited to 20° maximum for 8 and 12 mm tapes and 10° maximum for 16 mm tapes (see Figure 2).
(d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape and to 1.0 mm maximum for 16 mm tape (see Figure 3).
(e) see Addendum in EIA Standard 481–D for standards relating to more precise taping requirements.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2011_T497 • 7/19/2013 1515
Tantalum Surface Mount Capacitors
High Reliability COTS (CWR09/19/29 Style) – T497 High Grade COTS MnO2 Series
Packaging Information Performance Notes
1. Cover Tape Break Force: 1.0 Kg minimum.
2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be:
Tape Width Peel Strength
8 mm 0.1 to 1.0 Newton (10 to 100 gf)
12 and 16 mm 0.1 to 1.3 Newton (10 to 130 gf)
The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165° to 180°
from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 ±10 mm/minute.
3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA
Standards 556 and 624.
Figure 2 – Maximum Component Rotation
Ao
Bo
°
T
°
s
Maximum Component Rotation
Top View
Maximum Component Rotation
Side View
Tape Maximum
Width (mm) Rotation (°
T)
8,12 20
16 – 200 10 Tape Maximum
Width (mm) Rotation ( °
S)
8,12 20
16 – 56 10
72 – 200 5
Typical Pocket Centerline
Typical Component Centerline
Figure 3 – Maximum Lateral Movement
0.5 mm maximum
0.5 mm maximum
8 mm & 12 mm Tape
1.0 mm maximum
1.0 mm maximum
16 mm Tape
Figure 4 – Bending Radius
RR
Bending
Radius
Embossed
Carrier
Punched
Carrier
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2011_T497 • 7/19/2013 1616
Tantalum Surface Mount Capacitors
High Reliability COTS (CWR09/19/29 Style) – T497 High Grade COTS MnO2 Series
Figure 5 – Reel Dimensions
AD(See Note)
Full Radius,
See Note
B(see Note)
Access Hole at
Slot Location
(Ø 40 mm minimum)
If present,
tape slot in core
for tape start:
2.5 mm minimum width x
10.0 mm minimum depth
W3(Includes
flange distortion
at outer edge)
W2(Measured at hub)
W1(Measured at hub)
C
(Arbor hole
diameter)
Note: Drive spokes optional; if used, dimensions B and D shall apply.
N
Table 5 – Reel Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size A B Minimum C D Minimum
8 mm
178 ±0.20
(7.008 ±0.008)
or
330 ±0.20
(13.000 ±0.008)
1.5
(0.059)
13.0+0.5/-0.2
(0.521+0.02/-0.008)
20.2
(0.795)
12 mm
16 mm
Variable Dimensions — Millimeters (Inches)
Tape Size N Minimum W
1
W
2
Maximum W
3
8 mm
50
(1.969)
8.4+1.5/-0.0
(0.331+0.059/-0.0)
14.4
(0.567)
Shall accommodate tape width
without interference
12 mm
12.4+2.0/-0.0
(0.488+0.078/-0.0)
18.4
(0.724)
16 mm
16.4+2.0/-0.0
(0.646+0.078/-0.0)
22.4
(0.882)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2011_T497 • 7/19/2013 1717
Tantalum Surface Mount Capacitors
High Reliability COTS (CWR09/19/29 Style) – T497 High Grade COTS MnO2 Series
Figure 6 – Tape Leader & Trailer Dimensions
Trailer
160 mm Minimum
Carrier Tape
END START
Round Sprocket Holes
Elongated Sprocket Holes
(32 mm tape and wider)
Top Cover Tape
Top Cover Tape
Punched Carrier
8 mm & 12 mm only
Embossed Carrier
Components
100 mm
Minimum Leader
400 mm Minimum
Figure 7 – Maximum Camber
Carrier Tape
Round Sprocket Holes
1 mm Maximum, either direction
Straight Edge
250 mm
Elongated sprocket holes
(32 mm & wider tapes)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2011_T497 • 7/19/2013 1818
Tantalum Surface Mount Capacitors
High Reliability COTS (CWR09/19/29 Style) – T497 High Grade COTS MnO2 Series
KEMET Corporation
World Headquarters
2835 KEMET Way
Simpsonville, SC 29681
Mailing Address:
P.O. Box 5928
Greenville, SC 29606
www.kemet.com
Tel: 864-963-6300
Fax:864-963-6521
Corporate Of ces
FortLauderdale,FL
Tel: 954-766-2800
North America
Southeast
LakeMary,FL
Tel: 407-855-8886
Northeast
Wilmington, MA
Tel: 978-658-1663
Central
Novi, MI
Tel: 248-994-1030
West
Milpitas, CA
Tel: 408-433-9950
Mexico
Guadalajara, Jalisco
Tel: 52-33-3123-2141
Europe
Southern Europe
Paris,France
Tel: 33-1-4646-1006
Sasso Marconi, Italy
Tel: 39-051-939111
Central Europe
Landsberg, Germany
Tel: 49-8191-3350800
Kamen, Germany
Tel: 49-2307-438110
Northern Europe
Bishop’s Stortford, United Kingdom
Tel: 44-1279-460122
Espoo,Finland
Tel: 358-9-5406-5000
Asia
Northeast Asia
Hong Kong
Tel: 852-2305-1168
Shenzhen, China
Tel: 86-755-2518-1306
Beijing, China
Tel: 86-10-5829-1711
Shanghai, China
Tel: 86-21-6447-0707
Taipei, Taiwan
Tel: 886-2-27528585
Southeast Asia
Singapore
Tel: 65-6586-1900
Penang, Malaysia
Tel: 60-4-6430200
Bangalore, India
Tel: 91-806-53-76817
Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not
assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of
KEMET Electronics Corporation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2011_T497 • 7/19/2013 1919
Tantalum Surface Mount Capacitors
High Reliability COTS (CWR09/19/29 Style) – T497 High Grade COTS MnO2 Series
Other KEMET Resources
Tools
Resource Location
CongureAPart:CapEdge http://capacitoredge.kemet.com
SPICE&FITSoftware http://www.kemet.com/spice
SearchOurFAQs:KnowledgeEdge http://www.kemet.com/keask
Electrolytic LifeCalculator http://www.kemet.com:8080/elc
Product Information
Resource Location
Products http://www.kemet.com/products
Technical Resources (Including Soldering Techniques) http://www.kemet.com/technicalpapers
RoHS Statement http://www.kemet.com/rohs
QualityDocuments http://www.kemet.com/qualitydocuments
Product Request
Resource Location
Sample Request http://www.kemet.com/sample
Engineering Kit Request http://www.kemet.com/kits
Contact
Resource Location
Website www.kemet.com
Contact Us http://www.kemet.com/contact
Investor Relations http://www.kemet.com/ir
Call Us 1-877-MyKEMET
Twitter http://twitter.com/kemetcapacitors
Disclaimer
Allproductspecications,statements,informationanddata(collectively,the“Information”)inthisdatasheetaresubjecttochange.Thecustomerisresponsibleforcheckingand
verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.
All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are
notintendedtoconstitute–andKEMETspecicallydisclaims–anywarrantyconcerningsuitabilityforaspeciccustomerapplicationoruse.TheInformationisintendedforuseonly
by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise
provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still
occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective
circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage.
Although all productrelated warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not
be required.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2011_T497 • 7/19/2013 2020
Tantalum Surface Mount Capacitors
High Reliability COTS (CWR09/19/29 Style) – T497 High Grade COTS MnO2 Series
Digitally signed by Jeannette Calvo
DN: c=US, st=FL, l=Fort Lauderdale, o=KEMET Corp., ou=Marketing
Communications, cn=Jeannette Calvo, email=jeannettecalvo@kemet.com
Date: 2013.07.26 12:06:17 -04'00'