MCC TM Micro Commercial Components omponents 20736 Marilla Street Chatsworth !"# $ % !"# DTA144EKA Features * * * PNP Digital Transistors Built-in bias resistors enable the configuration of an inverter circuit without connecting external input resistors The bias resistors consist of thin-film resistors with complete isolation to allow negative biasing of the input. They also have the advantage of almost completely eliminating parasitic effects. Only the on/off conditions need to be set for operation, making device design easy SOT-23-3L Absolute maximum ratings @ 25 Symbol VCC VIN IO IC(MAX) Pd Tj Tstg Parameter Supply voltage Input voltage A Min ---40 Output current --- Power dissipation Junction temperature Storage temperature -----55 Typ -50 ---30 -100 200 150 --- Max --10 Unit V V --- mA ----150 mW fT Parameter Input voltage (VCC=-5V, IO=-100A) (VO=-0.3V, IO=-2mA) Output voltage (IO/II=-10mA/-0.5mA Input current (VI=-5V) Output current (VCC=-50V, VI=0) DC current gain (VO=-5V, IO=-5mA) Input resistance Resistance ratio Transition frequency (VCE=-10V, IE=5mA, f=100MHz) 3 1 C 2 Min ---3.0 ------68 32.9 0.8 Typ ------------47 1.0 Max -0.5 ---0.3 -0.18 -0.5 --61.1 1.2 Unit V V V mA A --- 250 --- MHz K 1. IN 2. GND 3. OUT B E H G Electrical Characteristics @ 25 Symbol VI(off) VI(on) VO(on) II IO(off) GI R1 R2/R1 D J K DIMENSIONS DIM A B C D E G H J K INCHES MIN MAX .113 .117 .108 .112 .061 .065 .036 .038 .073 .077 .0016 .0039 .044 .049 .006 .007 .013 .015 MM MIN 2.87 2.75 1.55 .925 1.85 .04 1.12 .14 .34 MAX 2.97 2.85 1.65 .975 1.95 .100 1.25 .17 .37 NOTE Suggested Solder Pad Layout .031 .800 .035 .900 .087 2.200 inches mm .037 .950 .037 .950 www.mccsemi.com Revision: 1 2005/06/24 DTA144EKA MCC TM Micro Commercial Components www.mccsemi.com Revision: 1 2005/06/24