SPEC NO: DSAI9666 REV NO: V.3 DATE: MAR/05/2009 PAGE: 1 OF 4
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.F.Lu ERP: 1101024770
T-1 (3mm) SOLID STATE LAMP
PRELIMINARY SPEC Part Number: WP7104SEC/J3 Hyper Red
Features
zLow power consumption.
zPopular T-1 diameter package.
zGeneral purpose leads.
zReliable and rugged.
zLong life - solid state reliability.
zAvailable on tape and reel.
zRoHS compliant.
Description
The Hyper Red device is based on light emitting diode chip
made from AlGaInP.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. Specifications are subject to change without notice.
SPEC NO: DSAI9666 REV NO: V.3 DATE: MAR/05/2009 PAGE: 2 OF 4
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.F.Lu ERP: 1101024770
Selection Guide
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. Luminous intensity/ luminous Flux: +/-15%.
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
3. 5mm below package base.
Part No. Dice Lens Type
V
iewing
Angle [1]
Min. Typ. 2θ1/2
WP7104SEC/J3 Hyper Red (AlGaInP) WATER CLEAR 3300 7000 34°
Iv (mcd) [2]
@ 20mA
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Hyper Red 640 nm IF=20mA
λD [1] Dominant Wavelength Hyper Red 625 nm IF=20mA
Δλ1/2 Spectral Line Half-width Hyper Red 25 nm IF=20mA
C Capacitance Hyper Red 27 pF VF=0V;f=1MHz
VF [2] Forward Voltage Hyper Red 2.2 2.8 V IF=20mA
IR Reverse Current Hyper Red 10 uA VR = 5V
Parameter Hyper Red Units
Power dissipation 84 mW
DC Forward Current 30 mA
Peak Forward Current [1] 150 mA
Reverse Voltage 5 V
Operating/Storage Temperature -40°C To +85°C
Lead Solder Temperature [2] 260°C For 3 Seconds
Lead Solder Temperature [3] 260°C For 5 Seconds
SPEC NO: DSAI9666 REV NO: V.3 DATE: MAR/05/2009 PAGE: 3 OF 4
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.F.Lu ERP: 1101024770
Hyper Red WP7104SEC/J3
RED
SPEC NO: DSAI9666 REV NO: V.3 DATE: MAR/05/2009 PAGE: 4 OF 4
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.F.Lu ERP: 1101024770
PACKING & LABEL SPECIFICATIONS WP7104SEC/J3
