LPV SMT Pin Header 2.54 mm Pitch For IDC Systems General Technical Features ERNI has designed the LPV Pin Header series in accordance with the IEC 60603-13 (DIN 41651) standard for signal transmission between PC boards and interfaces. SMT Pin Headers are designed for fully automatic SMT assembly and are characterized by the following features: black insulation body for easy visual recognition and high temperature resistant thermoplastic for all standard SMT reflow soldering processes. The pin headers are developed with pre-assembled pick-and-place covers that provide a firm vacuum grip and the tray packaging is designed for fully automated assembly. For signal transmission, use the female IDC connectors from the LPV series. * Pitch: 2.54 mm x 2.54 mm * Standard vertical and right angle pin header with interlocking clip www.ERNI.com/contact/ Catalog E XXXXXX 10/01 * Pin Number Standard: 10 - 64 * Material Insulator: PA46 Contact: Cu-Alloy * Plating Mating area: Au over Ni Termination: Sn * Closed design * Optional center or side polarization * Temperature range: -55/125C * Maximum SMT reflow solder temperature: 10s bei 260C * Current rating: 1A * Insulation resistance: >105 * Voltage rate: 1000 Veff Edition 1 Vertical SMT Pin Header Dimensional Drawings 0.25 Recesses for polarization element. See table for part numbers 1.5 140 0.1 -0.1 17 0.1 6.1 Example for printing 2.54 2.5 0.1 n x 2.54 = B D A 1.9-0.1 1.5 long short +0.3 14.4 +0.3 10.8 +1.0 23.2 +0.1 26.9 6.4 -0.05 +1.0 8 -0.2 2.54 1.52 0.05 Vakuum pick area D 7 10 B 2.54 9 4.5 3.5 4.25 8.5 3.5 3.7 0.25 1 2.8 D Number of Pins 10 14 16 20 26 34 40 50 60 64 2 www.ERNI.com/contact/ Catalog E XXXXXX 10/01 Edition 1 0.3 0.3 A B D +0.2 +/-0.5 +/-0.1 32.0 37.1 39.6 44.7 52.3 62.5 70.1 82.8 95.5 100.6 10.16 15.24 17.78 22.86 30.48 40.64 48.26 60.96 73.66 78.74 27.94 33.02 35.56 40.64 48.26 58.42 66.04 78.74 91.44 96.52 Number of recesses 1 1 2 2 2 2 2 2 2 2 Right Angle SMT Pin Header Dimensional Drawings Recesses for polarization element. See table for part numbers 0.25 1.5 2.5 A Clipebene 3 9 0.1 0.3 140 1.5 17 3.5 0.1 0.3 6.1 Example for printing 0.1 Vakuum pick area C 0.1 0.05 A A 1.9-0.1 C long n x 2.54 = B short 7 10 +0.3 14.4 +0.3 10.8 +1.0 23.2 +1.0 26.9 +0.1 6.4 -0.05 8 -0.2 2.54 0.05 2.54 0.3 0.3 B 2.54 9,8 4.3 3.7 8.5 3.5 4.25 3.5 1 2.8 C Number of Pins 10 14 16 20 26 34 40 50 60 64 A B C +0.2 +/-0.5 +/-0.1 32.0 37.1 39.6 44.7 52.3 62.5 70.1 82.8 95.5 100.6 10.16 15.24 17.78 22.86 30.48 40.64 48.26 60.96 73.66 78.74 21.84 26.92 29.46 34.54 42.16 52.32 59.94 72.64 85.34 90.42 Number of recesses 1 1 2 2 2 2 2 2 2 2 3 www.ERNI.com/contact/ Catalog E XXXXXX 10/01 Edition 1 Ordering Information Vertical SMT Pin Header Right Angle SMT Pin Header Part Number 123407 123408 123409 123410 123411 123412 123413 123414 123415 123416 Accessories Interlocking clip / short Interlocking clip / long Part Number 124722 124723 Number of Pins 10 14 16 20 26 34 40 50 60 64 Part Number 123417 123418 123419 123420 123421 123422 123423 123424 123425 123426 Printed in Germany * Subject to modification without prior notice. Number of Pins 10 14 16 20 26 34 40 50 60 64 4 www.ERNI.com/contact/ Catalog E XXXXXX 10/01 Edition 1