ORN www.vishay.com Vishay Dale Thin Film Molded, 50 mil Pitch, Dual-In-Line Thin Film Resistor, Surface Mount Network FEATURES * 0.068" (1.73 mm) maximum seated height * Rugged molded case construction with no internal solder * Low temperature coefficient ( 25 ppm/C) * JEDEC MS-012 STD variation AA package * Compliant to RoHS Directive 2002/95/EC * Halogen-free according to IEC 61249-2-21 definition Actual Size Note * Pb containing terminations are not RoHS compliant, exemptions may apply ORN series resistor networks feature four isolated resistors with standard 50 mil pitch lead spacing. The networks feature close TCR tracking and tight ratio tolerance and are ideally suited for unity gain operational amplifier circuitry. The standard resistance offering listed are available for immediate delivery. TYPICAL PERFORMANCE TCR SCHEMATIC TOL. 8 7 6 ABSOLUTE TRACKING 25 5 ABSOLUTE RATIO 0.1 0.05 5 STANDARD RESISTANCE OFFERING (R1 =) R1 R1 1 R1 2 R1 3 49.9 10 k 100 20 k 500 50 k 1 k 100 k 2 k 200 k 4.99 k 500 k 4 5 k Note * Consult factory for additional values and schematics STANDARD ELECTRICAL SPECIFICATIONS TEST Material Pin/Lead Number Resistance Range TCR: Absolute TCR: Tracking Tolerance: Absolute Tolerance: Ratio Power Rating: Resistor Power Rating: Package Stability: Absolute Stability: Ratio Voltage Coefficient Working Voltage Operating Temperature Range Storage Temperature Range Noise Thermal EMF Shelf Life Stability: Absolute Shelf Life Stability: Ratio Revision: 02-Sep-11 SPECIFICATIONS Passivated nichrome 8 33 to 500 k per resistor 25 ppm/C 5 ppm/C 0.05 % to 1.0 % 0.01 % to 0.5 % 100 mW 400 mW R 0.05 % R 0.015 % 0.1 ppm/V (typical) 100 V max. not to exceed P x R - 55 C to + 125 C - 55 C to + 150 C < - 30 dB 0.08 V/C R 0.01 % R 0.002 % 1 CONDITIONS - 55 C to + 125 C - 55 C to + 125 C + 25 C + 25 C Maximum at + 70 C Maximum at + 70 C 2000 h at + 70 C 2000 h at + 70 C 1 year at + 25 C 1 year at + 25 C Document Number: 60005 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ORN www.vishay.com Vishay Dale Thin Film DIMENSIONS AND IMPRINTING in inches and millimeters DIMENSION E B Resistance Value Code C F ORNA xxxx A G Date Code o D H Seating Plane I INCHES MILLIMETERS A 0.157 3.99 B 0.0165 0.0025 0.4 0.06 C 0.050 1.27 D 0.195 max. 4.93 E 0.008 0.001 0.20 0.03 F 0.028 0.001 0.71 0.02 G 0.239 0.005 6.07 0.13 H 0.068 max. 1.73 I 0.008 0.002 0.22 0.06 O 2 to 6 2 to 6 Note * Marking - Vishay symbol, part number from ordering information MECHANICAL SPECIFICATIONS DERATING CURVE Passivated nichrome Substrate Material Silicon Body 100 Precent of Rated Power Resistive Element Molded epoxy Terminals Copper alloy Lead (Pb)-free Option 100 % matte tin Tin Lead Option Sn90 Tin Lead and Lead (Pb)-free Finish Plated 100 % = 0.40 W 80 60 40 20 0 0 70 125 150 Ambient Temperature C GLOBAL PART NUMBER INFORMATION New Global Part Numbering: ORNA1002AUF O O R N A 1 0 0 2 A U F R N T A 1 0 0 3 Z T S GLOBAL MODEL (3 or 4 digits) SCHEMATIC RESISTANCE ORN (Tin lead) A = 4 isolated equal resistors The first 3 digits are significant figures and the last digit specifies the number of zeros to follow. R designates the decimal point. ORNT (Lead (Pb)-free) (e3) TOLERANCE AND RATIO TOLERANCE Example: 1002 = 10 k 1003 = 100 k 4991 = 4.99 k 50R0 = 50 Abs. Tol. A = 0.1 % (3) B = 0.1 % C = 0.25 % D = 0.5 % F=1% Q = 0.05 % (1) Z = 0.1 % (1) Ratio 0.05 % 0.1 % 0.1 % 0.1 % 0.5 % 0.01 % 0.025 % PACKAGING TAPE AND REEL T0 = 100 min., 100 mult T1 = 1000 min., 1000 mult (2) T3 = 300 min., 300 mult T5 = 500 min., 500 mult TF = Full reel 3000 TS = 100 min., 1 mult UF = TUBED Historical Part Number example: ORNA1001F (for reference purposes only) ORN A 1001 F SERIES SCHEMATIC RESISTANCE TOLERANCE AND RATIO TOLERANCE Notes (1) Tol. available 1K and up (2) Preferred packaging code (3) Ratio tolerance available 250 and up Revision: 02-Sep-11 2 Document Number: 60005 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: ORNA50-1 ORNA20-1 ORNA25-1T1 ORNA5-1TS ORNA50-1T5 ORNA2-1T1 ORNA5-1T1 ORNA50-1T1 ORNTA100-1T1 ORNTA2-1T1 ORNTA20-1T1 ORNTA25-1T1 ORNTA5-1T1 ORNTA50-1T1 ORNTA2-1UF ORNTA50-1UF ORNTA100-1UF ORNTA10-1UF ORNTA5-1UF ORNTA10-1T1 ORNA10-1T1 ORNA2-1T0 ORNA5-1T0 ORNA10-1T0 ORNA10-1T5 ORNA10-1TS ORNA10-1UF ORNA100-1TS ORNA2-1T5 ORNA2-1TS ORNA2-1UF ORNA20-1TS ORNA20-1UF ORNA25-1T0 ORNA25-1TS ORNA25-1UF ORNA5-1T3 ORNA5-1T5 ORNA5-1UF ORNA50-1TS ORNA50-1UF ORNTA10-1T0 ORNTA10-1T5 ORNTA100-1T0 ORNTA100-1T5 ORNTA2-1T0 ORNTA2-1T5 ORNTA2-1TS ORNTA20-1T0 ORNTA20-1T5 ORNTA20-1TS ORNTA20-1UF ORNTA25-1T0 ORNTA25-1T5 ORNTA25-1TS ORNTA25-1UF ORNTA5-1T0 ORNTA50-1T0 ORNTA50-1T5 ORNTA50-1TS