Everlight Electronics Co., Ltd. http://www.everlight.com Rev.2 Page: 1 of 10
Device No. : DSE-0008792 Prepared date:22-Apr-2013 Prepared by: Perfect
Technical Data Sheet
Chip LED with Right Angle Lens
12-21/GVC-AMPB/2C
Features
․Package in 8mm tape on 7〞diameter reel.
․Compatible with automatic placement equipment.
․Compatible with infrared and vapor phase reflow
solder process.
․Mono-color type.
․Pb-free.
․The product itself will remain within RoHS complaint version.
Descriptions
․The 12-21 SMD LED is much smaller than lead
frame type components, thus enable smaller board
size, higher packing density, reduced storage space
and finally smaller equipment to be obtained.
․Besides, lightweight makes them ideal for
miniature applications etc.
Applications
․Backlighting in dashboard and switch.
․Telecommunication: Indicator and backlighting in
telephone and fax.
․Flat backlight for LCD, switch and symbol.
․General use.
Device Selection Guide
Part No.
Chip
Emitted Color
Resin Color
Material
12-21/GVC-AMPB/2C
AlGaInP
Green
Water Clear
12-21/GVC-AMPB/2C
Everlight Electronics Co., Ltd. http://www.everlight.com Rev.2 Page: 2 of 10
Device No. : DSE-0008792 Prepared date:22-Apr-2013 Prepared by: Perfect
Package Outline Dimensions
1.1
0.9 0.650.65 0.80.8
0.6
0.3
1.4
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
12-21/GVC-AMPB/2C
Everlight Electronics Co., Ltd. http://www.everlight.com Rev.2 Page: 3 of 10
Device No. : DSE-0008792 Prepared date:22-Apr-2013 Prepared by: Perfect
Absolute Maximum Ratings (Ta=25℃)
Parameter
Symbol
Rating
Unit
Reverse Voltage
VR
5
V
Forward Current
IF
25
mA
Peak Forward Current
(Duty 1/10 @1KHz)
IFP
60
mA
Power Dissipation
Pd
60
mW
ElectrostaticDischarge(HBM)
ESD
2000
V
Operating Temperature
Topr
-40 ~ +85
℃
Storage Temperature
Tstg
-40~ +90
℃
Soldering Temperature
Tsol
Electro-Optical Characteristics (Ta=25℃)
Parameter
Symbol
Min.
Typ.
Max.
Unit
Condition
Luminous Intensity
IV
18.0
-----
72.0
mcd
IF=20mA
Viewing Angle
2θ1/2
----
120
----
deg
Peak Wavelength
λp
----
568
----
nm
Dominant Wavelength
λd
563.5
----
571.5
nm
Spectrum Radiation
Bandwidth
△λ
----
20
----
nm
Forward Voltage
VF
1.75
-----
2.35
V
Reverse Current
IR
----
----
10
μA
VR =5V
Notes:
1.Tolerance of Luminous Intensity ±11%
2.Tolerance of Dominant Wavelength ±1nm
3.Tolerance of Forward Voltage ±0.1V
12-21/GVC-AMPB/2C
Everlight Electronics Co., Ltd. http://www.everlight.com Rev.2 Page: 4 of 10
Device No. : DSE-0008792 Prepared date:22-Apr-2013 Prepared by: Perfect
Bin Range Of Dom Wavelength
Group
Bin
Min
Max
Unit
Condition
A
C13
563.5
565.5
nm
IF=20mA
C14
565.5
567.5
C15
567.5
569.5
C16
569.5
571.5
Bin Range Of Luminous Intensity
Bin
Min
Max
Unit
Condition
M
18.0
28.5
mcd
IF=20mA
N
28.5
45.0
P
45.0
72.0
Bin Range Of Forward Voltage
Group
Bin
Min
Max
Unit
Condition
B
0
1.75
1.95
V
IF=20mA
1
1.95
2.15
2
2.15
2.35
Notes:
1.Tolerance of Luminous Intensity ±11%
2.Tolerance of Dominant Wavelength ±1nm
3.Tolerance of Forward Voltage ±0.1V
12-21/GVC-AMPB/2C
Everlight Electronics Co., Ltd. http://www.everlight.com Rev.2 Page: 5 of 10
Device No. : DSE-0008792 Prepared date:22-Apr-2013 Prepared by: Perfect
Typical Electro-Optical Characteristics Curves
12-21/GVC-AMPB/2C
Everlight Electronics Co., Ltd. http://www.everlight.com Rev.2 Page: 6 of 10
Device No. : DSE-0008792 Prepared date:22-Apr-2013 Prepared by: Perfect
Label explanation
CAT: Luminous Intensity Rank
HUE: Dom. Wavelength Rank
REF: Forward Voltage Rank
Reel Dimensions
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
RoHS
Pb
CPN :
P N : XXXXXXXXXXXXX
XXXXXXXXXXXXX
QTY : XXX
LOT NO : XXXXXXXXXX
Reference : XXXXXXXX
CAT : XXX
HUE : XXX
REF : XXX
EVERLIGHT
MADE IN TAIWAN
12-21/GVC-AMPB/2C
Everlight Electronics Co., Ltd. http://www.everlight.com Rev.2 Page: 7 of 10
Device No. : DSE-0008792 Prepared date:22-Apr-2013 Prepared by: Perfect
Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Moisture Resistant Packaging
Label Aluminum moisture-proof bag Desiccant Label
12-21/GVC-AMPB/2C
Everlight Electronics Co., Ltd. http://www.everlight.com Rev.2 Page: 8 of 10
Device No. : DSE-0008792 Prepared date:22-Apr-2013 Prepared by: Perfect
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below.
Confidence level：90%
LTPD：10%
No.
Items
Test Condition
Test
Hours/Cycles
Sample
Size
Ac/Re
1
Reflow Soldering
Temp. : 260℃±5℃
Min. 5sec.
6 Min.
22 PCS.
0/1
2
Temperature Cycle
H : +100℃ 15min
∫ 5 min
L : -40℃ 15min
300 Cycles
22 PCS.
0/1
3
Thermal Shock
H : +100℃ 5min
∫ 10 sec
L : -10℃ 5min
300 Cycles
22 PCS.
0/1
4
High Temperature
Storage
Temp. : 100℃
1000 Hrs.
22 PCS.
0/1
5
Low Temperature
Storage
Temp. : -40℃
1000 Hrs.
22 PCS.
0/1
6
DC Operating Life
IF = 20 mA
1000 Hrs.
22 PCS.
0/1
7
High Temperature /
High Humidity
85℃/ 85% RH
1000 Hrs.
22 PCS.
0/1
12-21/GVC-AMPB/2C
Everlight Electronics Co., Ltd. http://www.everlight.com Rev.2 Page: 9 of 10
Device No. : DSE-0008792 Prepared date:22-Apr-2013 Prepared by: Perfect
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection , otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less.
If unused LEDs remain, it should be stored in moisture proof packages.
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃ for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
12-21/GVC-AMPB/2C
Everlight Electronics Co., Ltd. http://www.everlight.com Rev.2 Page: 10 of 10
Device No. : DSE-0008792 Prepared date:22-Apr-2013 Prepared by: Perfect
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds
within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do
soldering of each terminal. Be careful because the damage of the product is often started at the time of the
hand solder.
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a
double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether
the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936
Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267 -6306
Tucheng, Taipei 236, Taiwan, R.O.C http://www.everlight.com