© Semiconductor Components Industries, LLC, 2008
May, 2008 Rev. 9
1Publication Order Number:
MC79L00/D
MC79L00A Series
100 mA Negative Voltage
Regulators
The MC79L00A Series negative voltage regulators are
inexpensive, easytouse devices suitable for numerous applications
requiring up to 100 mA. Like the higher powered MC7900 Series
negative regulators, this series features thermal shutdown and current
limiting, making them remarkably rugged. In most applications, no
external components are required for operation.
The MC79L00A devices are useful for oncard regulation or any
other application where a regulated negative voltage at a modest
current level is needed. These regulators offer substantial advantage
over the common resistor/Zener diode approach.
Features
No External Components Required
Internal Short Circuit Current Limiting
Internal Thermal Overload Protection
Low Cost
Complementary Positive Regulators Offered (MC78L00 Series)
PbFree Packages are Available
*Automotive temperature range selections are available with special test conditions
and additional tests in 5, 12 and 15 V devices. Contact your local ON Semiconductor
sales office for information.
R1
R2
Z1
R3
R
5
R18
Q1
R6
Q4
R7
R4
R8
Q5
Q10
Q8
R9
Q14
Q9
C
Q6
R10 R11
Q7
Q2
Q11
R14 R15
Q13
Q12
R16
R17
GND
Output
Input
Figure 1. Representative Schematic Diagram
http://onsemi.com
THREETERMINAL LOW
CURRENT NEGATIVE FIXED
VOLTAGE REGULATORS
TO92
P SUFFIX
CASE 29
SOIC8
D SUFFIX
CASE 751
MARKING
DIAGRAMS
See detailed ordering and shipping information in the package
dimensions section on page 7 of this data sheet.
ORDERING INFORMATION
Pin 1. Ground
2. Input
3. Output
Pin 1. Vout
2. Vin
3. Vin
4. NC
5. GND
6. Vin
7. Vin
8. NC
xxx = Specific Device Code
A = Assembly Location
L = Wafer Lot
Y = Year
W, WW = Work Week
y = B or C
G= PbFree Package
MC79L
xxxxx
ALYWWG
G
1
8
(Note: Microdot may be in either location)
9Lxxx
ALYWx
G
1
8
123
12
BENT LEAD
TAPE & REEL
AMMO PACK
STRAIGHT LEAD
BULK PACK
3
MC79L00A Series
http://onsemi.com
2
MAXIMUM RATINGS (TA = +25°C, unless otherwise noted.)
Rating Symbol Value Unit
Input Voltage (5 V)
(12, 15, 18 V)
(24 V)
VI30
35
40
Vdc
Power Dissipation
Case 29 (TO92 Type)
TA = 25°C
Thermal Resistance, JunctiontoAmbient
Thermal Resistance, JunctiontoCase
Case 751 (SOIC8 Type) (Note 1)
TA = 25°C
Thermal Resistance, JunctiontoAmbient
Thermal Resistance, JunctiontoCase
PD
RqJA
RqJC
PD
RqJA
RqJC
Internally Limited
160
83
Internally Limited
180
45
W
°C/W
°C/W
W
°C/W
°C/W
Storage Temperature Range Tstg 65 to +150 °C
Junction Temperature TJ+150 °C
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
1. SOIC8 JunctiontoAmbient Thermal Resistance is for minimum recommended pad size. Refer to Figure 9 for Thermal Resistance variation
versus pad size.
*This device series contains ESD protection and exceeds the following tests:
Human Body Model 2000 V per MIL_STD_883, Method 3015
Machine Model Method 200 V.
ELECTRICAL CHARACTERISTICS (VI = 10 V, IO = 40 mA, CI = 0.33 mF, C O = 0.1 mF, 40°C < TJ +125°C (for MC79LXXAB),
0°C < TJ < +125°C (for MC79LXXAC)).
MC79L05AC, AB
Characteristics Symbol Min Typ Max Unit
Output Voltage (TJ = +25°C) VO4.8 5.0 5.2 Vdc
Input Regulation (TJ = +25°C)
7.0 Vdc VI 20 Vdc
8.0 Vdc VI 20 Vdc
Regline
150
100
mV
Load Regulation
TJ = +25°C, 1.0 mA IO 100 mA
1.0 mA IO 40 mA
Regload
60
30
mV
Output Voltage
7.0 Vdc VI 20 Vdc, 1.0 mA IO 40 mA
VI = 10 Vdc, 1.0 mA IO 70 mA
VO4.75
4.75
5.25
5.25
Vdc
Input Bias Current
(TJ = +25°C)
(TJ = +125°C)
IIB
6.0
5.5
mA
Input Bias Current Change
8.0 Vdc VI 20 Vdc
1.0 mA IO 40 mA
IIB
1.5
0.1
mA
Output Noise Voltage (TA = +25°C, 10 Hz f 100 kHz) Vn40 mV
Ripple Rejection (8.0 VI 18 Vdc, f = 120 Hz, TJ = +25°C) RR 41 49 dB
Dropout Voltage (IO = 40 mA, TJ = +25°C) |VIVO|1.7 Vdc
MC79L00A Series
http://onsemi.com
3
ELECTRICAL CHARACTERISTICS (VI = 19 V, IO = 40 mA, CI = 0.33 mF, C O = 0.1 mF, 40°C < TJ +125°C (for MC79LXXAB),
0°C < TJ < +125°C (for MC79LXXAC)).
MC79L12AC, AB
Characteristics Symbol Min Typ Max Unit
Output Voltage (TJ = +25°C) VO11.5 12 12.5 Vdc
Input Regulation (TJ = +25°C)
14.5 Vdc VI 27 Vdc
16 Vdc VI 27 Vdc
Regline
250
200
mV
Load Regulation
TJ = +25°C, 1.0 mA IO 100 mA
1.0 mA IO 40 mA
Regload
100
50
mV
Output Voltage
14.5 Vdc VI 27 Vdc, 1.0 mA IO 40 mA
VI = 19 Vdc, 1.0 mA IO 70 mA
VO11.4
11.4
12.6
12.6
Vdc
Input Bias Current
(TJ = +25°C)
(TJ = +125°C)
IIB
6.5
6.0
mA
Input Bias Current Change
16 Vdc VI 27 Vdc
1.0 mA IO 40 mA
IIB
1.5
0.2
mA
Output Noise Voltage (TA = +25°C, 10 Hz f 100 kHz) Vn80 mV
Ripple Rejection (15 VI 25 Vdc, f = 120 Hz, TJ = +25°C) RR 37 42 dB
Dropout Voltage (IO = 40 mA, TJ = +25°C) |VIVO|1.7 Vdc
ELECTRICAL CHARACTERISTICS (VI = 23 V, IO = 40 mA, CI = 0.33 mF, C O = 0.1 mF, 40°C < TJ +125°C (for MC79LXXAB),
0°C < TJ < +125°C (for MC79LXXAC)).
MC79L15AC, AB
Characteristics Symbol Min Typ Max Unit
Output Voltage (TJ = +25°C) VO14.4 15 15.6 Vdc
Input Regulation (TJ = +25°C)
17.5 Vdc VI 30 Vdc
20 Vdc VI 30 Vdc
Regline
300
250
mV
Load Regulation
TJ = +25°C, 1.0 mA IO 100 mA
1.0 mA IO 40 mA
Regload
150
75
mV
Output Voltage
17.5 Vdc VI Vdc, 1.0 mA IO 40 mA
VI = 23 Vdc, 1.0 mA IO 70 mA
VO14.25
14.25
15.75
15.75
Vdc
Input Bias Current
(TJ = +25°C)
(TJ = +125°C)
IIB
6.5
6.0
mA
Input Bias Current Change
20 Vdc VI 30 Vdc
1.0 mA IO 40 mA
DIIB
1.5
0.1
mA
Output Noise Voltage (TA = +25°C, 10 Hz f 100 kHz) VN90 mV
Ripple Rejection (18.5 VI 28.5 Vdc, f = 120 Hz) RR 34 39 dB
Dropout Voltage IO = 40 mA, TJ = +25°C |VIVO|1.7 Vdc
MC79L00A Series
http://onsemi.com
4
ELECTRICAL CHARACTERISTICS (VI = 27 V, IO = 40 mA, CI = 0.33 mF, C O = 0.1 mF, 40°C < TJ +125°C (for MC79LXXAB),
0°C < TJ < +125°C (for MC79LXXAC), unless otherwise noted).
MC79L18AC
Characteristics Symbol Min Typ Max Unit
Output Voltage (TJ = +25°C) VO17.3 18 18.7 Vdc
Input Regulation (TJ = +25°C)
20.7 Vdc VI 33 Vdc
21.4 Vdc VI 33 Vdc
22 Vdc VI 33 Vdc
21 Vdc VI 33 Vdc
Regline
325
275
mV
Load Regulation
TJ = +25°C, 1.0 mA IO 100 mA
1.0 mA IO 40 mA
Regload
170
85
mV
Output Voltage
20.7 Vdc VI 33 Vdc, 1.0 mA IO 40 mA
21.4 Vdc VI 33 Vdc, 1.0 mA IO 40 mA
VI = 27 Vdc, 1.0 mA IO 70 mA
VO17.1
17.1
18.9
18.9
Vdc
Input Bias Current
(TJ = +25°C)
(TJ = +125°C)
IIB
6.5
6.0
mA
Input Bias Current Change
21 Vdc VI 33 Vdc
27 Vdc VI 33 Vdc
1.0 mA IO 40 mA
IIB
1.5
0.1
mA
Output Noise Voltage (TA = +25°C, 10 Hz f 100 kHz) Vn150 mV
Ripple Rejection (23 VI 33 Vdc, f = 120 Hz, TJ = +25°C) RR 33 48 dB
Dropout Voltage IO = 40 mA, TJ = +25°C |VIVO| 1.7 Vdc
ELECTRICAL CHARACTERISTICS (VI = 33 V, IO = 40 mA, CI = 0.33 mF, C O = 0.1 mF, 40°C < TJ +125°C (for MC79LXXAB),
0°C < TJ < +125°C (for MC79LXXAC), unless otherwise noted).
MC79L24AC
Characteristics Symbol Min Typ Max Unit
Output Voltage (TJ = +25°C) VO23 24 25 Vdc
Input Regulation (TJ = +25°C)
27 Vdc VI 38 Vdc
27.5 Vdc VI 38 Vdc
28 Vdc VI 38 Vdc
Regline
350
300
mV
Load Regulation
TJ = +25°C, 1.0 mA IO 100 mA
1.0 mA IO 40 mA
Regload
200
100
mV
Output Voltage
27 Vdc VI 38 V, 1.0 mA IO 40 mA
28 Vdc VI 38 Vdc, 1.0 mA IO 40 mA
VI = 33 Vdc, 1.0 mA IO 70 mA
VO22.8
22.8
25.2
25.2
Vdc
Input Bias Current
(TJ = +25°C)
(TJ = +125°C)
IIB
6.5
6.0
mA
Input Bias Current Change
28 Vdc VI 38 Vdc
1.0 mA IO 40 mA
DIIB
1.5
0.1
mA
Output Noise Voltage (TA = +25°C, 10 Hz f 100 kHz) Vn200 mV
Ripple Rejection (29 VI 35 Vdc, f = 120 Hz, TJ = +25°C) RR 31 47 dB
Dropout Voltage IO = 40 mA, TJ = +25°C |VIVO|1.7 Vdc
MC79L00A Series
http://onsemi.com
5
APPLICATIONS INFORMATION
Design Considerations
The MC79L00A Series of fixed voltage regulators are
designed with Thermal Overload Protections that shuts
down the circuit when subjected to an excessive power
overload condition, Internal Short Circuit Protection that
limits the maximum current the circuit will pass.
In many low current applications, compensation
capacitors are not required. However, it is recommended
that the regulator input be bypassed with a capacitor if the
regulator is connected to the power supply filter with long
wire length, or if the output load capacitance is large. An
input bypass capacitor should be selected to provide good
highfrequency characteristics to insure stable operation
under all load conditions. A 0.33 mF or larger tantalum,
mylar, or other capacitor having low internal impedance at
high frequencies should be chosen. The bypass capacitor
should be mounted with the shortest possible leads directly
across the regulators input terminals. Normally good
construction techniques should be used to minimize ground
loops and lead resistance drops since the regulator has no
external sense lead. Bypassing the output is also
recommended.
Figure 2. Positive and Negative Regulator Figure 3. Standard Application
+Vin +VO
0.1mF
-Vin -VO
0.33mF
MC78LXX
MC79LXX
0.1mF
0.33mF
Input Output
CO**
0.1mF
CI*
0.33mF
MC79LXX
A common ground is required between the input and the output
voltages. The input voltage must remain typically 2.0 V above
the output voltage even during the low point on the ripple voltage.
* CI is required if regulator is located an appreciable
* distance from the power supply filter
** CO improves stability and transient response.
MC79L00A Series
http://onsemi.com
6
TYPICAL CHARACTERISTICS
(TA = +25°C, unless otherwise noted.)
IIB, INPUT BIAS CURRENT (mA)
IIB, INPUT BIAS CURRENT (mA) VO, OUTPUT VOLTAGE (V)
Figure 4. Dropout Characteristics Figure 5. Dropout Voltage versus
Junction Temperature
Figure 6. Input Bias Current versus
Ambient Temperature
Figure 7. Input Bias Current versus
Input Voltage
Figure 8. Maximum Average Power Dissipation
versus Ambient Temperature (TO92)
8.0
6.0
4.0
2.0
00 -2.0 -4.0 -6.0 -0.8 -10
Vin, INPUT VOLTAGE (V)
MC79L05C
VO = -5.0 V
TJ = 25°C
IO = 1.0 mA IO = 100 mA
IO = 40 mA
-2.5
-2.0
-1.5
-1.0
-0.5
00 25 50 75 100 125
, INPUT/OUTPUT DIFFERENTIAL
VOLTAGE (V)
IO
TJ, JUNCTION TEMPERATURE (°C)
IO = 70 mA
-VV
4.0
4.2
3.8
3.6
3.4
3.2
3.0
00 25 50 75 100 125
TA, AMBIENT TEMPERATURE (°C)
MC79L05C
Vin = -10 V
VO = -5.0 V
IO = 40 mA
5.0
4.0
3.0
2.0
1.0
00 -5.0 -10 -15 -20 -25 -30 -35 -40
Vin, INPUT VOLTAGE (V)
MC79L05C
VO = -5.0 V
IO = 40 mA
10,000
1,000
100
10
, POWER DISSIPATION (mW)
D
TA, AMBIENT TEMPERATURE (°C)
25 50 75 100 125 150
P
No Heatsink
RqJA = 200°C/W
PD(max) to 25°C = 625 mW
Figure 9. SOP8 Thermal Resistance and Maximum
Power Dissipation versus P.C.B. Copper Length
30
50
70
90
110
130
150
0.4
0.8
1.2
1.6
2.0
2.4
2.8
02030504010
L, LENGTH OF COPPER (mm)
170 3.2
PD(max) for TA = +50°C
RqJA
PD, MAXIMUM POWER DISSIPATION (W)
ÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎ
ÎÎÎ
2.0 oz.
Copper
Graph represents symmetrical layout
3.0 mmL
L
IO = 40 mA
IO = 1.0 mA
JUNCTION-TO-AIR ( C/W)°
RJA , THERMAL RESISTANCE
θ
Dropout of Regulation is
defined when
DVO = 2% of VO
MC79L00A Series
http://onsemi.com
7
ORDERING INFORMATION
Device Nominal
Voltage
Operating Temperature
Range
Package Shipping
MC79L05ABD 5.0 V TJ = 40° to +125°C SOIC898 Units / Rail
MC79L05ABDG SOIC8
(PbFree)
98 Units / Rail
MC79L05ABDR2 SOIC82500 / Tape & Reel
MC79L05ABDR2G SOIC8
(PbFree)
2500 / Tape & Reel
MC79L05ABP TO92 2000 Units / Bag
MC79L05ABPG TO92
(PbFree)
2000 Units / Bag
MC79L05ABPRA TO92 2000 / Tape & Reel
MC79L05ABPRAG TO92
(PbFree)
2000 / Tape & Reel
MC79L05ACD TJ = 0° to +125°C SOIC898 Units / Rail
MC79L05ACDG SOIC8
(PbFree)
98 Units / Rail
MC79L05ACDR2 SOIC82500 / Tape & Reel
MC79L05ACDR2G SOIC8
(PbFree)
2500 / Tape & Reel
MC79L05ACP TO92 2000 Units / Bag
MC79L05ACPG TO92
(PbFree)
2000 Units / Bag
MC79L05ACPRA TO92 2000 / Tape & Reel
MC79L05ACPRAG TO92
(PbFree)
2000 / Tape & Reel
MC79L05ACPRM TO92 2000 / Tape & Ammo Box
MC79L05ACPRMG TO92
(PbFree)
2000 / Tape & Ammo Box
MC79L05ACPRP TO92 2000 / Tape & Ammo Box
MC79L05ACPRPG TO92
(PbFree)
2000 / Tape & Ammo Box
MC79L12ABD 12 V TJ = 40° to +125°C SOIC898 Units / Rail
MC79L12ABDG SOIC8
(PbFree)
98 Units / Rail
MC79L12ABDR2 SOIC82500 / Tape & Reel
MC79L12ABDR2G SOIC8
(PbFree)
2500 / Tape & Reel
MC79L12ABP TO92 2000 Units / Bag
MC79L12ABPG TO92
(PbFree)
2000 Units / Bag
MC79L12ABPRA TO92 2000 / Tape & Reel
MC79L12ABPRAG TO92
(PbFree)
2000 / Tape & Reel
For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
MC79L00A Series
http://onsemi.com
8
ORDERING INFORMATION
Device Nominal
Voltage
Operating Temperature
Range
Package Shipping
MC79L12ACD 12 V TJ = 0° to +125°C SOIC898 Units / Rail
MC79L12ACDG SOIC8
(PbFree)
98 Units / Rail
MC79L12ACDR2 SOIC82500 / Tape & Reel
MC79L12ACDR2G SOIC8
(PbFree)
2500 / Tape & Reel
MC79L12ACP TO92 2000 Units / Bag
MC79L12ACPG TO92
(PbFree)
2000 Units / Bag
MC79L12ACPRA TO92 2000 / Tape & Reel
MC79L12ACPRAG TO92
(PbFree)
2000 / Tape & Reel
MC79L12ACPRP TO92 2000 / Tape & Ammo Box
MC79L12ACPRPG TO92
(PbFree)
2000 / Tape & Ammo Box
MC79L15ABD 15 V TJ = 40° to +125°C SOIC898 Units / Rail
MC79L15ABDG SOIC8
(PbFree)
98 Units / Rail
MC79L15ABDR2 SOIC82500 / Tape & Reel
MC79L15ABDR2G SOIC8
(PbFree)
2500 / Tape & Reel
MC79L15ABP TO92 2000 Units / Bag
MC79L15ABPG TO92
(PbFree)
2000 Units / Bag
MC79L15ABPRP TO92 2000 / Tape & Ammo Box
MC79L15ABPRPG TO92
(PbFree)
2000 / Tape & Ammo Box
MC79L15ACD TJ = 0° to +125°C SOIC898 Units / Rail
MC79L15ACDG SOIC8
(PbFree)
98 Units / Rail
MC79L15ACDR2 SOIC82500 / Tape & Reel
MC79L15ACDR2G SOIC8
(PbFree)
2500 / Tape & Reel
MC79L15ACP TO92 2000 Units / Bag
MC79L15ACPG TO92
(PbFree)
2000 Units / Bag
MC79L15ACPRA TO92 2000 / Tape & Reel
MC79L15ACPRAG TO92
(PbFree)
2000 / Tape & Reel
MC79L15ACPRE TO92 2000 / Tape & Reel
MC79L15ACPREG TO92
(PbFree)
2000 / Tape & Reel
MC79L15ACPRP TO92 2000 / Tape & Ammo Box
MC79L15ACPRPG TO92
(PbFree)
2000 / Tape & Ammo Box
For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
MC79L00A Series
http://onsemi.com
9
ORDERING INFORMATION
Device Nominal
Voltage
Operating Temperature
Range
Package Shipping
MC79L18ABPRP 18 V TJ = 40° to +125°CTO92 2000 / Tape & Ammo Box
MC79L18ABPRPG TO92
(PbFree)
2000 / Tape & Ammo Box
MC79L18ACP TJ = 0° to +125°CTO92 2000 Units / Bag
MC79L18ACPG TO92
(PbFree)
2000 Units / Bag
MC79L24ABP 24 V TJ = 40° to +125°CTO92 2000 Units / Bag
MC79L24ABPG TO92
(PbFree)
2000 Units / Bag
MC79L24ACP TJ = 0° to +125°CTO92 2000 Units / Bag
MC79L24ACPG TO92
(PbFree)
2000 Units / Bag
MC79L24ACPRM TO92 2000 / Tape & Ammo Box
MC79L24ACPRMG TO92
(PbFree)
2000 / Tape & Ammo Box
MC79L24ACPRP TO92 2000 / Tape & Ammo Box
MC79L24ACPRPG TO92
(PbFree)
2000 / Tape & Ammo Box
For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
MC79L00A Series
http://onsemi.com
10
PACKAGE DIMENSIONS
SOIC8
CASE 75107
ISSUE AJ
SEATING
PLANE
1
4
58
N
J
X 45_
K
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ANSI Y14.5M, 1982.
2. CONTROLLING DIMENSION: MILLIMETER.
3. DIMENSION A AND B DO NOT INCLUDE
MOLD PROTRUSION.
4. MAXIMUM MOLD PROTRUSION 0.15 (0.006)
PER SIDE.
5. DIMENSION D DOES NOT INCLUDE DAMBAR
PROTRUSION. ALLOWABLE DAMBAR
PROTRUSION SHALL BE 0.127 (0.005) TOTAL
IN EXCESS OF THE D DIMENSION AT
MAXIMUM MATERIAL CONDITION.
6. 75101 THRU 75106 ARE OBSOLETE. NEW
STANDARD IS 75107.
A
BS
D
H
C
0.10 (0.004)
DIM
A
MIN MAX MIN MAX
INCHES
4.80 5.00 0.189 0.197
MILLIMETERS
B3.80 4.00 0.150 0.157
C1.35 1.75 0.053 0.069
D0.33 0.51 0.013 0.020
G1.27 BSC 0.050 BSC
H0.10 0.25 0.004 0.010
J0.19 0.25 0.007 0.010
K0.40 1.27 0.016 0.050
M0 8 0 8
N0.25 0.50 0.010 0.020
S5.80 6.20 0.228 0.244
X
Y
G
M
Y
M
0.25 (0.010)
Z
Y
M
0.25 (0.010) ZSXS
M
____
1.52
0.060
7.0
0.275
0.6
0.024
1.270
0.050
4.0
0.155
ǒmm
inchesǓ
SCALE 6:1
*For additional information on our PbFree strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
SOLDERING FOOTPRINT*
MC79L00A Series
http://onsemi.com
11
PACKAGE DIMENSIONS
TO92 (TO226)
CASE 2911
ISSUE AM
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. CONTOUR OF PACKAGE BEYOND DIMENSION R
IS UNCONTROLLED.
4. LEAD DIMENSION IS UNCONTROLLED IN P AND
BEYOND DIMENSION K MINIMUM.
R
A
P
J
L
B
K
G
H
SECTION XX
C
V
D
N
N
XX
SEATING
PLANE DIM MIN MAX MIN MAX
MILLIMETERSINCHES
A0.175 0.205 4.45 5.20
B0.170 0.210 4.32 5.33
C0.125 0.165 3.18 4.19
D0.016 0.021 0.407 0.533
G0.045 0.055 1.15 1.39
H0.095 0.105 2.42 2.66
J0.015 0.020 0.39 0.50
K0.500 --- 12.70 ---
L0.250 --- 6.35 ---
N0.080 0.105 2.04 2.66
P--- 0.100 --- 2.54
R0.115 --- 2.93 ---
V0.135 --- 3.43 ---
1
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION:
MILLIMETERS.
3. CONTOUR OF PACKAGE BEYOND
DIMENSION R IS UNCONTROLLED.
4. LEAD DIMENSION IS UNCONTROLLED IN
P AND BEYOND DIMENSION K MINIMUM.
RA
P
J
B
K
G
SECTION XX
C
V
D
N
XX
SEATING
PLANE DIM MIN MAX
MILLIMETERS
A4.45 5.20
B4.32 5.33
C3.18 4.19
D0.40 0.54
G2.40 2.80
J0.39 0.50
K12.70 ---
N2.04 2.66
P1.50 4.00
R2.93 ---
V3.43 ---
1
T
STRAIGHT LEAD
BULK PACK
BENT LEAD
TAPE & REEL
AMMO PACK
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any
liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental
damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over
time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under
its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body,
or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death
may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees,
subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of
personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part.
SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
N. American Technical Support: 8002829855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81357733850
MC79L00/D
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 3036752175 or 8003443860 Toll Free USA/Canada
Fax: 3036752176 or 8003443867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your loc
a
Sales Representative