Freescale Semiconductor, Inc. User's Manual Freescale Semiconductor, Inc... M68CPA08QF5264UM/D Version 1.0 June 24, 2003 M68CPA08QF5264 Programming Adapter User's Manual (c) Motorola, Inc., 2003 For More Information On This Product, Go to: www.freescale.com Freescale Semiconductor, Inc. Important Notice to Users Freescale Semiconductor, Inc... While every effort has been made to ensure the accuracy of all information in this document, Motorola assumes no liability to any party for any loss or damage caused by errors or omissions or by statements of any kind in this document, its updates, supplements, or special editions, whether such errors are omissions or statements resulting from negligence, accident, or any other cause. Motorola further assumes no liability arising out of the application or use of any information, product, or system described herein: nor any liability for incidental or consequential damages arising from the use of this document. Motorola disclaims all warranties regarding the information contained herein, whether expressed, implied, or statutory, including implied warranties of merchantability or fitness for a particular purpose. Motorola makes no representation that the interconnection of products in the manner described herein will not infringe on existing or future patent rights, nor do the descriptions contained herein imply the granting or license to make, use or sell equipment constructed in accordance with this description. Trademarks This document includes these trademarks: Motorola and the Motorola logo are registered trademarks of Motorola, Inc. Windows is a registered trademark of Microsoft Corporation in the U.S. and other countries. Intel is a registered trademark of Intel Corporation. Motorola, Inc., is an Equal Opportunity / Affirmative Action Employer. For an electronic copy of this book, visit Motorola's web site at http://e-www.motorola.com/ (c) Motorola, Inc., 2003; All Rights Reserved M68CPA08QF5264 Programming Adapter - Version 1.0 User's Manual 2 MOTOROLA For More Information On This Product, Go to: www.freescale.com Freescale Semiconductor, Inc. User's Manual -- M68CPA08QF5264 Programming Adapter Freescale Semiconductor, Inc... M68CPA08QF5264 Quick Start Guide The M68CPA08QF5264 is a low-cost programming adapter for HC08 family MCUs. It is designed to work with programmers that use a 16-pin MON08 interface. It supports 52-pin 0.65mm QFP packages, 64-pin 0.5mm QFP packages and 64-pin 0.8mm QFP packages. 1 - Connect wire jumpers MON08 connector J3 has the same pin signals as connector J2. You must connect up to 16 supplied jumpers from J3 to J1 for 52-pin 0.65mm QFP devices, from J3 to J6 for 64-pin 0.8mm QFP or 64-pin 0.5mm QFP devices. These jumpers provide power and programming signals to the MCU. Connections will vary depending on the specific device you are using. Refer to the device data sheet and the programer documentation for connection information. 2 - Insert a device to be programmed Be sure that power is removed before inserting a device. Socket U1 is used for 52-pin 0.65mm QFP devices, socket U2 for 64-pin 0.8mm QFP devices or socket U3 for 64-pin 0.5mm QFP devices. Open the desired socket and insert device. You should not use force when closing the socket lid. Close the socket latch to secure the device. 3 - Connect the MON08 programmer and program the device Connect a MON08 programmer to connector J2 of the programming adapter board. Be sure to verify that pin one of the programmer connects to pin one of connector J2. You may now use the programmer to program the inserted device. Refer to your programmer documentation for further operating instructions. Once the programmer indicates that the device has been properly programmed you may open the socket and remove the device. User's Manual MOTOROLA M68CPA08QF5264 Programming Adapter - Version 1.0 M68CPA08QF5264 Quick Start Guide For More Information On This Product, Go to: www.freescale.com 3 Freescale Semiconductor, Inc... Freescale Semiconductor, Inc. For More Information On This Product, Go to: www.freescale.com 1 1 1 1 2 1 3 1 1 1 1 1 1 2 3 4 5 6 7 8 9 10 11 12 For More Information On This Product, Go to: www.freescale.com N/A N/A U3 U2 U1 R1-R3 J6 J4,J5 J3 J2 J1 C1 JEDEC Page 2 OD 2 THA BARE BOARD (P/N RE11339) DDI SKT 0.5mm 64 PINS Enplas LABEL, PART NUMBER/REVISION 1"x 0.25" PRINTED WITH "RE11339B REV O" VENDOR SKT 0.8mm 64 PINS Enplas QFP64_PSOC_5M M_ENP QFP64_PSOC_8M M_ENP Yageo/DigiKey SAMTEC Berg Samtec Samtec SAMTEC Kemet RE11339F REV O FPQ-64-0.5-06 FPQ-64-0.8-10A FPQ-52-0.65-04 -- -- -- -- -- -- -- NOTES Approval Date:05/22/03 ZOR-25-R/ 0.0QTR-ND TSW-132-07-S-D 68001-605 TSW-108-08-G-D TST-108-01-S-D TSW-126-07-S-D C410C104M5U5CA PART NUMBER contained in MPN: M68CPA08QF5264 MFGR Enplas RES TF 0 Ohm 1/4w 5% HDR 2X32 TH 100mil CTR 330H Au HDR 1X5 TH 100mil CTR 330H Au HDR 2X8 TH 100mil CTR 330H Au HDR 2X8 TH 100mil CTR 330H Au SHRD HDR 2X26 TH 100mil CTR 330H Au CAP CER 0.1uF 50V 20% Z5U TH DESCRIPTION QFP52_PSOC_65M M_ENP SKT 0.65mm 52 PINS R600_MF50 HDR232 HDR105 HDR208 HDR208_4W HDR226 C300_CKR23 B11339.xls REF DES Motorola / Metrowerks QTY ITEM for PWB P/N RE11339B Freescale Semiconductor, Inc... BILL OF MATERIALS - DRAWING NO. 01A11339B REV O Freescale Semiconductor, Inc. Freescale Semiconductor, Inc. HOW TO REACH US: World Wide Web Address Motorola: http://e-www.motorola.com Information in this document is provided solely to enable system and software Freescale Semiconductor, Inc... implementers to use Motorola products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits or integrated circuits based on the information in this document. Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and the Stylized M Logo are registered in the U.S. Patent and Trademark Office. digital dna is a trademark of Motorola, Inc. All other product or service names are the property of their respective owners. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. (c) Motorola, Inc. 2003 M68CPA08QF5264UM/D For More Information On This Product, Go to: www.freescale.com