STS, FEATURES UL Recognized File # E-230084 # Ideal for printed circuit board * Reliable low cost construction technique results in inexpensive product High temperature soldering guaranteed: 250C/10 seconds at 5 Ibs.(2.3kg) tension # Small size,simple installation Leads solderable per MIL-STD-202, Method 208 KBP2005 THRU KBP210 Voltage Range 50 to 1000 Volts Current 2.0 Amperes KBP 162(4.1) 600(15.2) aS 560(14.2) > + tr Ts pss Sets 460(11.7) 420(10.7) 2039(1.0) 0.500127) cane 0.60 (15.27) | | MIN | al yi at 60/47) u 5 140(3,6) | 034(8.6} 0281 7.6 ) Dimensions in inches and (millimeters) For capacitive load, derate current by 20% MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25C ambient temperature unless otherwise specified, Single phase, half wave, 60Hz, resistive or inductive load, KBP KBP KBP KBP KBP KBP KBP Type Number 2005 | 201 | 202 | 204 206 | 208 | 210 | UNITS Maximum Repetitive Peak Reverse Vollage VRRM| 50 100 200 400 600 B00 | 1000 V Maximum RMS Voltage Vams| 39 70 140 280 420 560 700 V Maximum DC Blocking Voltage Vobe 50 100 200 400 600 600 1000 V Maximum Average Forward Rectified Current @Ta= sO , IF(AV) as A Peak Forward Surge Current 8.3 ms Single Half Sine-wave Superimposed on Rated load lFsm 50 A (JEDEC method) Maximum Instantaneous Forward Voltage We Drop Per leq @ 24 1.1 V Maximun DC Reverse Current Ta=25'C | Ir 5 iA at Rated DC Blocking Voltage Ta= 125 C 100 LA Operating Temperature Range Tu =55 to + 150 "C storage Temperature Range TSTG =55 to + 150 "Cc RATING AND CHARACTERISTIC CURVES KBP2005 THRU KBP210 FIG, 1- MAXIMUN NON-REPETITIVE FORWARD SURGE CURRENT PER BRIDGE ELEMENT 60 < i BO X G 40 LL) g Sel = 30 a a Ps < NS = #20 J o ay a * 410 0) i 2 4 6 10 20 40 60 100 NUMBER OF CYCLES AT 60Hz FIG.2-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PER BRIDGE ELEMENT 10.0 1,0 0,1 INSTANTANEOUS FORWARD CURRENT. (A) T25'C PULSE WIDTH-300uS 1% DUTY CYCLE ir a A | 7,0 1,1 12 14 1.4 INSTANTANEOUS FORWARD VOLTAGEV) UA) AVERAGE FORWARD CURRENT INSTANTANEOUS REVERSE CURRENT. (wA) FIG.2-MAXIMUM FORWARD CURRENT DERATING CURVE 100 10 0.1 20 40 60 80 100 AMBIENT TEMPERATURE, (C) 120 140 150 F|iG,4- TYPICAL REVERSE CHARACTERISTICS PER BRIDGE ELEMENT 20 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) 40 60 ao) 100 120 140