VS-16F(R) Series www.vishay.com Vishay Semiconductors Standard Recovery Diodes, (Stud Version), 16 A FEATURES * High surge current capability * Stud cathode and stud anode version * Wide current range * Types up to 1200 V VRRM * Designed and qualified for industrial and consumer level * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 DO-4 (DO-203AA) TYPICAL APPLICATIONS PRIMARY CHARACTERISTICS * Battery charges IF(AV) 16 A Package DO-4 (DO-203AA) Circuit configuration Single * Converters * Power supplies * Machine tool controls MAJOR RATINGS AND CHARACTERISTICS PARAMETER TEST CONDITIONS IF(AV) I2t VRRM UNITS 16 A TC 140 C 25 A 50 Hz 350 60 Hz 370 IF(RMS) IFSM VALUES A 50 Hz 612 60 Hz 560 Range 100 to 1200 V -65 to +175 C IRRM MAXIMUM AT TJ = 175 C mA TJ A2s ELECTRICAL SPECIFICATIONS SPECIFICATIONS VOLTAGE RATINGS TYPE NUMBER VS-16F(R) VOLTAGE CODE VRRM, MAXIMUM REPETITIVE PEAK REVERSE VOLTAGE V VRSM, MAXIMUM NON-REPETITIVE PEAK VOLTAGE V 10 100 150 20 200 275 40 400 500 60 600 725 80 800 950 100 1000 1200 120 1200 1400 12 Revision: 11-Jan-18 Document Number: 93491 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-16F(R) Series www.vishay.com Vishay Semiconductors FORWARD CONDUCTION PARAMETER SYMBOL Maximum average forward current at case temperature Maximum RMS forward current IF(AV) TEST CONDITIONS 180 conduction, half sine wave IF(RMS) t = 10 ms Maximum peak, one-cycle forward, non-repetitive surge current VALUES IFSM t = 8.3 ms t = 10 ms t = 8.3 ms t = 10 ms Maximum I2t for fusing I2t Maximum I2t for fusing I2t t = 8.3 ms t = 10 ms t = 8.3 ms No voltage reapplied A 140 C 25 A 350 No voltage reapplied 100 % VRRM reapplied UNITS 16 370 A 295 Sinusoidal half wave, initial TJ = TJ maximum 310 612 560 100 % VRRM reapplied A2s 435 395 t = 0.1 to 10 ms, no voltage reapplied 6120 Low level value of threshold voltage VF(TO)1 (16.7 % x x IF(AV) < I < x IF(AV)), TJ = TJ maximum 0.77 High level value of threshold voltage VF(TO)2 (I > x IF(AV)), TJ = TJ maximum 0.90 A2s V Low level value of forward slope resistance rf1 (16.7 % x x IF(AV) < I < x IF(AV)), TJ = TJ maximum 7.80 High level value of forward slope resistance rf2 (I > x IF(AV)), TJ = TJ maximum 5.70 Ipk = 50 A, TJ = 25 C, tp = 400 s rectangular wave 1.23 V VALUES UNITS m Maximum forward voltage drop VFM THERMAL AND MECHANICAL SPECIFICATIONS PARAMETER SYMBOL Maximum junction operating temperature range TEST CONDITIONS TJ -65 to +175 Maximum storage temperature range TStg -65 to +200 Maximum thermal resistance, junction to case RthJC DC operation 1.6 Maximum thermal resistance, case to heat sink RthCS Mounting surface, smooth, flat and greased 0.5 C K/W Not lubricated threads 1.5 + 0 - 10 % (13) N*m (lbf * in) Lubricated threads 1.2 + 0 - 10 % (10) N*m (lbf * in) 7 g 0.25 oz. Allowable mounting torque Approximate weight Case style See dimensions - link at the end of datasheet DO-4 (DO-203AA) RthJC CONDUCTION CONDUCTION ANGLE SINUSOIDAL CONDUCTION RECTANGULAR CONDUCTION 180 0.31 0.23 120 0.38 0.40 90 0.49 0.54 60 0.72 0.75 30 1.20 1.21 TEST CONDITIONS UNITS TJ = TJ maximum K/W Note * The table above shows the increment of thermal resistance RthJC when devices operate at different conduction angles than DC Revision: 11-Jan-18 Document Number: 93491 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-16F(R) Series www.vishay.com 180 16F(R) Series R thJC (DC) = 1.6 K/W 16F(R) Series R thJC (DC) = 1.6 K/W Maximum Allowable Case Temperature (C) Maximum Allowable Case Temperature (C) 180 Vishay Semiconductors 170 160 Conduction Angle 150 90 140 60 170 160 Conduction Period 150 90 60 120 140 120 30 30 180 130 180 DC 130 0 4 8 12 16 20 0 5 Average Forward Current (A) 15 20 25 30 Average Forward Current (A) Fig. 1 - Current Ratings Characteristics Maximum Average Forward Power Loss (W) 10 Fig. 2 - Current Ratings Characteristics 20 R 180 120 90 60 30 16 6K = 4K /W 8 K/ W 10 K /W 12 RMS Limit -D elta R 15 K/W 8 20 K/W Conduction Angle 30 K/W 4 0 th SA /W 16F(R) Series TJ = 175C 0 4 8 12 16 Average Forward Current (A) 25 20 50 75 100 Maximum Allowable Ambient Temperature (C) Maximum Average Forward Power Loss (W) Fig. 3 - Forward Power Loss Characteristics 25 DC 180 120 90 60 30 20 15 R th 6K /W SA RMS Limit 8 K/ W 10 K /W =4 K/W -D elta R 1 5 K/W 10 20 K/W Conduction Period 30 K/W 5 16F(R) Series TJ = 175C 0 0 5 10 15 20 25 30 25 50 75 100 Maximum Allowable Ambient Temperature (C) Average Forward Current (A) Fig. 4 - Forward Power Loss Characteristics Revision: 11-Jan-18 Document Number: 93491 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-16F(R) Series Instantaneous Forward Current (A) 325 Vishay Semiconductors At Any Rated Load Condition And With Rated VRRM Applied Following Surge. Initial TJ = 175C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s 300 275 250 225 200 175 16F(R) Series 150 125 1 10 1000 TJ = 25C TJ = 175C 100 10 16F(R) Series 1 0 100 Number Of Equal Amplitude Half Cycle Current Pulses (N) Fig. 5 - Maximum Non-Repetitive Surge Current 350 325 300 275 Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Initial TJ = 175C No Voltage Reapplied Rated VRRM Reapplied 225 200 175 125 0.01 16F(R) Series 0.1 2 3 4 5 6 Fig. 7 - Forward Voltage Drop Characteristics 250 150 1 Instantaneous Forward Voltage (V) ZthJC - Transient Thermal Impedance (C/W) Peak Half Sine Wave Forward Current (A) Peak Half Sine Wave Forward Current (A) www.vishay.com 1 Pulse Train Duration (s) 10 Steady State Value R thJC = 1.6 K/W (DC Operation) 1 16F(R) Series 0.1 0.001 0.01 0.1 1 10 Square Wave Pulse Duration (s) Fig. 8 - Thermal Impedance ZthJC Characteristics Fig. 6 - Maximum Non-Repetitive Surge Current ORDERING INFORMATION TABLE Device code VS- 16 F R 120 M 1 2 3 4 5 6 1 - Vishay Semiconductors product 2 - Current rating: code = IF(AV) 3 - F = standard device 4 - None = stud normal polarity (cathode to stud) R = stud reverse polarity (anode to stud) 5 - Voltage code x 10 = VRRM (see Voltage Ratings table) 6 - None = stud base DO-4 (DO-203AA) 10-32UNF-2A M = stud base DO-4 (DO-203AA) M5 x 0.8 LINKS TO RELATED DOCUMENTS Dimensions www.vishay.com/doc?95311 Revision: 11-Jan-18 Document Number: 93491 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Outline Dimensions Vishay Semiconductors DO-203AA (DO-4) DIMENSIONS in millimeters (inches) + 0.3 0 + 0.01 (0.08 0) 0.8 0.1 (0.03 0.004) 3.30 (0.13) 4.00 (0.16) 2 5.50 (0.22) MIN. R 0.40 R (0.02) O 1.80 0.20 (O 0.07 0.01) 20.30 (0.80) MAX. O 6.8 (0.27) 10.20 (0.40) MAX. 3.50 (0.14) 11.50 (0.45) 10.70 (0.42) 10/32" UNF-2A For metric devices: M5 x 0.8 11 (0.43) Document Number: 95311 Revision: 30-Jun-08 For technical questions, contact: indmodules@vishay.com www.vishay.com 1 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: VS-16F10 VS-16F100 VS-16F120 VS-16F20 VS-16F40 VS-16F60 VS-16F80 VS-16FR10 VS-16FR100 VS16FR120 VS-16FR20 VS-16FR40 VS-16FR60 VS-16FR80 VS-16FL80S05 VS-16F120M VS-16FR80M