Features n RoHS compliant* and halogen free** n Surface mount SMC package n Standoff voltage: 5 to 170 volts n Peak Pulse Power: 5000 watts n Typical temperature coefficient: DVBR = 0.1 % x VBR @ 25 C x DT 5.0SMDJ Transient Voltage Suppressor Diode Series General Information Agency Recognition Portable communications, computing and video equipment manufacturers are challenging the semiconductor industry to develop increasingly higher power density circuit protection components. Description UL File Number: E153537 Bourns offers Transient Voltage Suppressor Diodes for surge and ESD protection applications, in compact chip package DO-214AB (SMC) size format. The Transient Voltage Suppressor series offers a choice of Working Peak Reverse Voltage from 5 V up to 170 V and Breakdown Voltage up to 209 V. Typical fast response times are less than 1.0 ps from 0 V to Breakdown Voltage. Bourns(R) Chip Diodes conform to JEDEC standards, are easy to handle with standard pick and place equipment and the flat configuration minimizes roll away. Electrical Characteristics (@ TA = 25 C Unless Otherwise Noted) Parameter Minimum Peak Pulse Power Dissipation (Tp = 1 ms) (Note 1,2) Peak Forward Surge Current 8.3 ms Single Half Sine Wave Superimposed on Rated Load (JEDEC Method) (Note 3,4) Steady State Power Dissipation @ TL = 50 C Maximum Instantaneous Forward Voltage @ IPP = 100 A (For Unidirectional Units Only) Operating Temperature Range Storage Temperature Range Symbol Value Unit PPK 5000 Watts IFSM 300 Amps PM(AV) 6.5 Watts VF 5 Volts TJ -55 to +150 C -55 to +150 C TSTG 1. Non-repetitive current pulse, per Pulse Waveform graph and derated above TA = 25 C per Pulse Derating Curve. 2. Thermal Resistance Junction to Lead. 3. 8.3 ms Single Sine Wave duty cycle = 4 pulses maximum per minute (unidirectional units only). 4. Mounted on 8.0 mm x 8.0 mm copper pad area to each terminal. How to Order 5.0SMDJ 12 CA - H Asia-Pacific: Tel: +886-2 2562-4117 * Email: asiacus@bourns.com Europe: Tel: +36 88 885 877 * Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 * Email: americus@bourns.com www.bourns.com Package 5.0SMDJ = SMC/DO-214AB Working Peak Reverse Voltage 12 = 12 VRWM (Volts) Suffix A = 5 % Tolerance Unidirectional Device CA = 5 % Tolerance Bidirectional Device Reel (Blank) = 13-inch Reel -H = 7-inch Reel WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov *RoHS Directive 2015/863, Mar 31, 2015 and Annex. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. 5.0SMDJ Transient Voltage Suppressor Diode Series Electrical Characteristics (@ TA = 25 C Unless Otherwise Noted) Unidirectional Device Part Number 5.0SMDJ5.0A 5.0SMDJ6.0A 5.0SMDJ6.5A 5.0SMDJ7.0A 5.0SMDJ7.5A 5.0SMDJ8.0A 5.0SMDJ8.5A 5.0SMDJ9.0A 5.0SMDJ10A 5.0SMDJ11A 5.0SMDJ12A 5.0SMDJ13A 5.0SMDJ14A 5.0SMDJ15A 5.0SMDJ16A 5.0SMDJ17A 5.0SMDJ18A 5.0SMDJ20A 5.0SMDJ22A 5.0SMDJ24A 5.0SMDJ26A 5.0SMDJ28A 5.0SMDJ30A 5.0SMDJ33A 5.0SMDJ36A 5.0SMDJ40A 5.0SMDJ43A 5.0SMDJ45A 5.0SMDJ48A 5.0SMDJ51A 5.0SMDJ54A 5.0SMDJ58A 5.0SMDJ60A 5.0SMDJ64A 5.0SMDJ70A 5.0SMDJ75A 5.0SMDJ78A 5.0SMDJ85A 5.0SMDJ90A 5.0SMDJ100A 5.0SMDJ110A 5.0SMDJ120A 5.0SMDJ130A 5.0SMDJ150A 5.0SMDJ160A 5.0SMDJ170A Part Marking 5RDE 5RDG 5RDK 5PDM 5PDP 5PDR 5PDT 5PDV 5PDX 5PDZ 5PEP 5PEQ 5PER 5PES 5PET 5PEU 5PEV 5PEW 5PEX 5PEZ 5PFE 5PFG 5PFK 5PFM 5PFP 5PFR 5PFT 5PFV 5PFX 5PFZ 5RGE 5PGG 5PGK 5PGM 5PGP 5PGR 5PGT 5PGV 5PGX 5PGZ 5PHE 5PHG 5PHK 5PHM 5PHP 5PHR Bidirectional Device Part Number 5.0SMDJ5.0CA 5.0SMDJ6.0CA 5.0SMDJ6.5CA 5.0SMDJ7.0CA 5.0SMDJ7.5CA 5.0SMDJ8.0CA 5.0SMDJ8.5CA 5.0SMDJ9.0CA 5.0SMDJ10CA 5.0SMDJ11CA 5.0SMDJ12CA 5.0SMDJ13CA 5.0SMDJ14CA 5.0SMDJ15CA 5.0SMDJ16CA 5.0SMDJ17CA 5.0SMDJ18CA 5.0SMDJ20CA 5.0SMDJ22CA 5.0SMDJ24CA 5.0SMDJ26CA 5.0SMDJ28CA 5.0SMDJ30CA 5.0SMDJ33CA 5.0SMDJ36CA 5.0SMDJ40CA 5.0SMDJ43CA 5.0SMDJ45CA 5.0SMDJ48CA 5.0SMDJ51CA 5.0SMDJ54CA 5.0SMDJ58CA 5.0SMDJ60CA 5.0SMDJ64CA 5.0SMDJ70CA 5.0SMDJ75CA 5.0SMDJ78CA 5.0SMDJ85CA Maximum Maximum Maximum Maximum Maximum Reverse Peak Clamping Peak Reverse Clamping Breakdown Voltage Voltage Pulse Voltage Pulse Standoff Leakage VBR (Volts) @ Ipp Current @ Ipp Current Voltage @ VRWM (10/1000 s) (8/20 s) Part Min. Marking 5DDE 5DDG 5DDK 5DDM 5DDP 5DDR 5DDT 5DDV 5DDX 5DDZ 5BEP 5BEQ 5BER 5BES 5BET 5BEU 5BEV 5BEW 5BEX 5BEZ 5BFE 5BFG 5BFK 5BFM 5BFP 5BFR 5BFT 5BFV 5BFX 5BFZ 5BGE 5BGG 5BGK 5BGM 5BGP 5BGR 5BGT 5BGV 6.40 6.67 7.22 7.78 8.33 8.89 9.44 10.00 11.10 12.20 13.30 14.40 15.60 16.70 17.80 18.90 20.00 22.20 24.40 26.70 28.90 31.10 33.30 36.70 40.00 44.40 47.80 50.00 53.30 56.70 60.00 64.40 66.70 71.10 77.80 83.30 86.70 94.40 100.00 111.00 122.00 133.00 144.00 167.00 178.00 189.00 Max. 7.00 7.37 7.98 8.60 9.21 9.83 10.40 11.10 12.30 13.50 14.70 15.90 17.20 18.50 19.70 20.90 22.10 24.50 26.90 29.50 31.90 34.40 36.80 40.60 44.20 49.10 52.80 55.30 58.90 62.70 66.30 71.20 73.70 78.60 86.00 92.10 95.80 104.00 111.00 123.00 135.00 147.00 159.00 185.00 197.00 209.00 @ IT (mA) 10 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 VRWM (V) 5.0 6.0 6.5 7.0 7.5 8.0 8.5 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 20.0 22.0 24.0 26.0 28.0 30.0 33.0 36.0 40.0 43.0 45.0 48.0 51.0 54.0 58.0 60.0 64.0 70.0 75.0 78.0 85.0 90.0 100.0 110.0 120.0 130.0 150.0 160.0 170.0 IR (A) 1050 1050 750 300 150 70 30 12 6 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 (10/1000 s) Vc (V) 9.2 10.3 11.2 12.0 12.9 13.6 14.4 15.4 17.0 18.2 19.9 21.5 23.2 24.4 26.0 27.6 29.2 32.4 35.5 38.9 42.1 45.4 48.4 53.3 58.1 64.5 69.4 72.7 77.4 82.4 87.1 93.6 96.8 103.0 113.0 121.0 126.0 137.0 146.0 162.0 177.0 193.0 209.0 243.0 259.0 275.0 (8/20 s) Ipp (A) 543.6 485.5 446.5 416.8 387.7 367.7 347.3 324.8 294.2 274.8 252.0 233.0 216.0 205.0 193.0 181.0 172.0 155.0 141.0 129.0 119.0 110.0 103.0 93.9 86.1 77.6 72.1 68.8 64.7 60.7 57.5 53.5 51.7 48.6 44.3 41.4 39.7 36.5 34.3 30.9 28.3 26.0 24.0 20.6 19.3 18.2 Vc (V) 12.0 13.4 14.6 15.6 16.8 17.7 18.7 20.0 22.1 23.7 25.9 28.0 30.2 31.7 33.8 35.9 38.0 42.1 46.2 50.6 54.7 59.0 62.9 69.3 75.5 83.9 90.2 94.5 100.6 107.1 113.2 121.7 125.8 133.9 146.9 157.3 163.8 178.1 189.8 210.6 230.1 250.9 271.7 315.9 336.7 357.5 Ipp (A) 4077.0 3641.3 3348.8 3126.0 2907.8 2757.8 2604.8 2436.0 2206.5 2061.0 1890.0 1747.5 1620.0 1537.5 1447.5 1357.5 1290.0 1162.5 1057.5 967.5 892.5 825.0 772.5 704.3 645.8 582.0 540.8 516.0 485.3 455.3 431.3 401.3 387.8 364.5 332.3 310.5 297.8 273.8 257.3 231.8 212.3 195.0 180.0 154.5 144.8 136.5 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. 5.0SMDJ Transient Voltage Suppressor Diode Series A Product Dimensions Recommended Footprint A A B C B B A C G Dimension C CATHODEBAND (UNIDIRECTIONALDEVICESONLY) A (Max.) B (Min.) G F H D C (Min.) E H F DIMENSIONS: Dimension SMC MM (DO-214AB) DIMENSIONS: (INCHES) 6.60 - 7.11 A (0.260 - 0.280) 5.59 - 6.22 B (0.220 - 0.245) 2.90 - 3.20 C (0.114 - 0.126) 0.15 - 0.31 D (0.006 - 0.012) 7.75 - 8.13 E (0.305 - 0.320) 0.05 - 0.20 F (0.002 - 0.008) 2.01 - 2.62 G (0.080 - 0.103) 0.76 - 1.52 H (0.030 - 0.060) DIMENSIONS: SMC (DO-214AB) 4.69 (0.185) 3.07 (0.121) 1.53 (0.060) DIMENSIONS: D E C B CATHODEBAND (UNIDIRECTIONALDEVICESONLY) MM (INCHES) MM (INCHES) Physical Specifications Encapsulation..............................Molded plastic per UL Class 94V-0 Polarity....................... Cathode band indicates unidirectional device No cathode band indicates bidirectional device Environmental Specifications Moisture Sensitivity Level.................................................................1 ESD Classification (HBM)............................................................. 3B MM (INCHES) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. 5.0SMDJ Transient Voltage Suppressor Diode Series Rating & Characteristic Curves Pulse Derating Curve Maximum Non-Repetitive Surge Current PeakForwardSurgeCurrent(Amps) PeakPulseDeratinginPercentof PeakPowerorCurrent 100 75 50 25 10x1000WaveformasDefined byR.E.A. 0 25 0 75 50 100 125 150 175 300 250 200 150 100 300Aat1cycle 100Aat80cycles 50 0 1 200 2 5 Pulse Waveform CJ-JunctionCapacitance(pF) IP,PeakPulseCurrent(%) Halfvalue= IRSM 2 Pulsewidth(TP) isdefinedasthatpoint wherethepeakcurrent decaysto50%ofIPSM. 50 10x1000waveform asdefinedbyR.E.A. TA=25C TP 100 0 2.0 1.0 3.0 Bidirectionalv=0v Unidirectionalv=0v 10000 1000 100 Bidirectional @VR TJ=25C f=1.0MHz Vsig=50mVp-p 10 1 4.0 Unidirectional @VR 1 10 T,Time(ms) 100 1000 VBR-ReverseBreakdownVoltage(V) Pulse Rating Curve Steady State Power Derating Curve 1000 6.5 TA=25C PM(AV)SteadyStatePowerDissipation(W) P PPM -PeakPulsePower(kW) 50 100000 Peakvalue(IRSM) 100 20 Typical Junction Capacitance TR=10s 0 10 NumberofCyclesat60Hz JunctionTemperature(C) 100 10 1 8.0x8.0mm (0.31x0.31in.) CopperPadAreas 0.1 0.1s 1.0s 10s 100s 1.0ms t d -PulseWidth(sec.) 10ms 6.0 5.5 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 60HzResistiveor InductiveLoad 0 25 50 75 100 125 150 175 200 TL,LeadTemperature(C) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. 5.0SMDJ Transient Voltage Suppressor CDDFN5-0504N - TVS/Steering DiodeDiode ArraySeries Packaging Information The product will be dispensed in tape and reel format (see diagram below). P 0 P 1 d T E IndexHole 120 F D2 W B D1 D P Trailer ....... ....... End A Unidirectional Product Orientation C Device ....... ....... ....... ....... Leader ....... ....... 10pitches(min.) DIMENSIONS: MM (INCHES) 10pitches(min.) DirectionofFeed Item Symbol Carrier Width A Carrier Length B Carrier Depth C Sprocket Hole d Reel Outside Diameter D Reel Inner Diameter D1 Feed Hole Diameter D2 Sprocket Hole Position E Punch Hole Position F Punch Hole Pitch P Sprocket Hole Pitch P0 Embossment Center P1 Overall Tape Thickness T Tape Width W Reel Width W1 Quantity per Reel REV. 03/20 W1 Start -- Devices are packed in accordance with EIA standard EIA-481-D and specifications shown here. SMC (DO-214AB) 7-Inch Reel 13-Inch Reel 6.0 0.20 (0.236 0.079) 8.3 0.20 (0.327 0.008) 2.5 0.20 (0.098 0.008) 1.50 0.10 (0.059 0.004) 178 330 (7.008) (12.992) 50.0 MIN. (1.969) 13.0 +0.50/-0.20 (0.512 +0.020/-0.008) 1.75 0.10 (0.069 0.004) 7.50 0.10 (0.295 0.004) 8.00 0.10 (0.315 0.004) 4.00 0.10 (0.157 0.004) 2.00 0.10 (0.079 0.004) 0.30 0.10 (0.012 0.004) 16.00 0.30 (0.630 0.012) 22.4 MAX. (0.882) 500 3,000 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns(R) products manufactured by or on behalf of Bourns, Inc. and its affiliates (collectively, "Bourns"). Unless otherwise expressly indicated in writing, Bourns(R) products and data sheets relating thereto are subject to change without notice. Users should check for and obtain the latest relevant information and verify that such information is current and complete before placing orders for Bourns(R) products. The characteristics and parameters of a Bourns(R) product set forth in its data sheet are based on laboratory conditions, and statements regarding the suitability of products for certain types of applications are based on Bourns' knowledge of typical requirements in generic applications. The characteristics and parameters of a Bourns(R) product in a user application may vary from the data sheet characteristics and parameters due to (i) the combination of the Bourns(R) product with other components in the user's application, or (ii) the environment of the user application itself. The characteristics and parameters of a Bourns(R) product also can and do vary in different applications and actual performance may vary over time. Users should always verify the actual performance of the Bourns(R) product in their specific devices and applications, and make their own independent judgments regarding the amount of additional test margin to design into their device or application to compensate for differences between laboratory and real world conditions. Unless Bourns has explicitly designated an individual Bourns(R) product as meeting the requirements of a particular industry standard (e.g., ISO/TS 16949) or a particular qualification (e.g., UL listed or recognized), Bourns is not responsible for any failure of an individual Bourns(R) product to meet the requirements of such industry standard or particular qualification. Users of Bourns(R) products are responsible for ensuring compliance with safety-related requirements and standards applicable to their devices or applications. Bourns(R) products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining applications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property or environmental damage. Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any Bourns(R) products in such unauthorized applications might not be safe and thus is at the user's sole risk. Life-critical applications include devices identified by the U.S. Food and Drug Administration as Class III devices and generally equivalent classifications outside of the United States. Bourns expressly identifies those Bourns(R) standard products that are suitable for use in automotive applications on such products' data sheets in the section entitled "Applications." Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns(R) standard products in an automotive application might not be safe and thus is not recommended, authorized or intended and is at the user's sole risk. If Bourns expressly identifies a sub-category of automotive application in the data sheet for its standard products (such as infotainment or lighting), such identification means that Bourns has reviewed its standard product and has determined that if such Bourns(R) standard product is considered for potential use in automotive applications, it should only be used in such sub-category of automotive applications. Any reference to Bourns(R) standard product in the data sheet as compliant with the AEC-Q standard or "automotive grade" does not by itself mean that Bourns has approved such product for use in an automotive application. Bourns(R) standard products are not tested to comply with United States Federal Aviation Administration standards generally or any other generally equivalent governmental organization standard applicable to products designed or manufactured for use in aircraft or space applications. Bourns expressly identifies Bourns(R) standard products that are suitable for use in aircraft or space applications on such products' data sheets in the section entitled "Applications." Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns(R) standard product in an aircraft or space application might not be safe and thus is not recommended, authorized or intended and is at the user's sole risk. The use and level of testing applicable to Bourns(R) custom products shall be negotiated on a case-by-case basis by Bourns and the user for which such Bourns(R) custom products are specially designed. Absent a written agreement between Bourns and the user regarding the use and level of such testing, the above provisions applicable to Bourns(R) standard products shall also apply to such Bourns(R) custom products. Users shall not sell, transfer, export or re-export any Bourns(R) products or technology for use in activities which involve the design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use Bourns(R) products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions apply to all uses and applications that violate national or international prohibitions, including embargos or international regulations. Further, Bourns(R) products and Bourns technology and technical data may not under any circumstance be exported or re-exported to countries subject to international sanctions or embargoes. Bourns(R) products may not, without prior authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible to receive U.S. commodities, software, and technical data. To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability for special, punitive, consequential, incidental or indirect damages or lost revenues or lost profits, and (ii) any and all implied warranties, including implied warranties of fitness for particular purpose, non-infringement and merchantability. For your convenience, copies of this Legal Disclaimer Notice with German, Spanish, Japanese, Traditional Chinese and Simplified Chinese bilingual versions are available at: Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf C1753 05/17/18R