1N4678UR-1 thru 1N4717UR-1 Available on commercial versions 500 mW SURFACE MOUNT ZENER DIODES Screening in reference to MIL-PRF-19500 available DESCRIPTION The 1N4678UR-1 thru 1N4717UR-1 series of 0.5 watt glass surface mount DO-213AA Zener voltage regulators provides a selection from 1.8 to 43 volts. Standard tolerance is +/-5%, with 1% and 2% options available. The Zener test current is only 50 uA. The metal slugs that sandwich the die are metallurgically bonded to the silicon for high reliability. This type of internally bonded Zener package construction is also available with high-reliability upscreening as described in the Features section. Microsemi also offers numerous other Zener products to meet higher and lower power applications. DO-213AA Package Important: For the latest information, visit our website http://www.microsemi.com. FEATURES * * * * * Surface mount equivalent of JEDEC registered 1N4678 thru 1N4717 series. Internal metallurgical bond. Hermetically sealed surface mount package. Tighter voltage tolerances of 2% and 1% are available. Up-screening available in reference to MIL-PRF-19500. Also available in: DO-35 (DO-204AH) (surface mount) 1N4678-1 - 1N4717-1 (See part nomenclature for all available options.) * RoHS compliant devices available (commercial grade only). APPLICATIONS / BENEFITS * * * * * Regulates voltage over a broad operating current and temperature range. Voltage selection from 1.8 to 43 V. Non-sensitive to ESD per MIL-STD-750 method 1020. Minimal capacitance (see Figure 2). Inherently radiation hard as described in Microsemi's "MicroNote 050". MAXIMUM RATINGS Parameters/Test Conditions Junction and Storage Temperature (1) Thermal Resistance Junction-to-End Cap (1) Thermal Resistance Junction-to-Ambient (2) Steady-State Power Dissipation Forward Voltage @ 100 mA Solder Temperature @ 10 s Symbol Value T J and T STG R JL R JA PD VF T SP -65 to +175 100 250 0.5 1.5 260 Notes: 1. When mounted on FR4 PC board (1 oz Cu) with recommended footprint (see last page). 2. At T EC < 125 oC or at ambient T A < 50 C when mounted on FR4 PC board. Unit o C C/W o C/W W V o C o MSC - Lawrence 6 Lake Street, Lawrence, MA 01841 Tel: 1-800-446-1158 or (978) 620-2600 Fax: (978) 689-0803 MSC - Ireland Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 Website: www.microsemi.com T4-LDS-0240-1, Rev. 2 (120722) (c)2012 Microsemi Corporation Page 1 of 5 1N4678UR-1 thru 1N4717UR-1 MECHANICAL and PACKAGING * * * * * * * CASE: Hermetically sealed glass DO-213AA (SOD80 or MLL34) MELF style package. TERMINALS: End caps available with tin-lead plating or RoHS compliant matte-tin plating (commercial version only). Solderable per MIL-STD-750, method 2026. POLARITY: Cathode indicated by band where diode is to be operated with the banded end positive with respect to the opposite end for Zener regulation. MARKING: The cathode is the banded end of the device. TAPE & REEL option: Standard per EIA-481-1-B (add "TR" suffix to part number). Consult factory for quantities. WEIGHT: 0.04 grams. See Package Dimensions on last page. PART NOMENCLATURE MQ 1N4678 C UR -1 (e3) Reliability Level MQ (reference JAN) MX reference JANTX MV (reference JANTXV) MSP (reference JANS) Blank = Commercial RoHS Compliance e3 = RoHS Compliant (available on commercial grade only) Blank = non-RoHS Compliant Metallurgically Bonded JEDEC type number (see Electrical Characteristics table) Zener Voltage Tolerances Blank = 5% C = 2% D = 1% SYMBOLS & DEFINITIONS Definition Symbol I ZT or I ZK IR I ZM T SP VR VZ Surface Mount package Regulator Current: The dc regulator current (I Z ), at a specified test point (I ZT ), near breakdown knee (I ZK ). Reverse Current: The maximum reverse (leakage) current that will flow at the specified voltage and temperature. Maximum Regulator (Zener) Current: The maximum rated dc current for the specified power rating. Temperature Solder Pad: The maximum solder temperature that can be safely applied to the terminal. Reverse Voltage: The reverse voltage dc value, no alternating component. Zener Voltage: The Zener voltage the device will exhibit at a specified current (I Z ) in its breakdown region. T4-LDS-0240-1, Rev. 2 (120722) (c)2012 Microsemi Corporation Page 2 of 5 1N4678UR-1 thru 1N4717UR-1 o ELECTRICAL CHARACTERISTICS @ 25 C unless otherwise noted. JEDEC TYPE NUMBER (Note 1) NOMINAL ZENER VOLTAGE (Note 3) VZ ZENER TEST CURRENT Volts 1N4678UR-1 1.8 1N4679UR-1 2.0 1N4680UR-1 2.2 1N4681UR-1 2.4 1N4682UR-1 2.7 1N4683UR-1 3.0 1N4684UR-1 3.3 1N4685UR-1 3.6 1N4686UR-1 3.9 1N4687UR-1 4.3 1N4688UR-1 4.7 1N4689UR-1 5.1 1N4690UR-1 5.6 1N4691UR-1 6.2 1N4692UR-1 6.8 1N4693UR-1 7.5 1N4694UR-1 8.2 1N4695UR-1 8.7 1N4696UR-1 9.1 1N4697UR-1 10.0 1N4698UR-1 11.0 1N4699UR-1 12.0 1N4700UR-1 13.0 1N4701UR-1 14.0 1N4702UR-1 15.0 1N4703UR-1 16.0 1N4704UR-1 17.0 1N4705UR-1 18.0 1N4706UR-1 19.0 1N4707UR-1 20.0 1N4708UR-1 22.0 1N4709UR-1 24.0 1N4710UR-1 25.0 1N4711UR-1 27.0 1N4712UR-1 28.0 1N4713UR-1 30.0 1N4714UR-1 33.0 1N4715UR-1 36.0 1N4716UR-1 39.0 1N4717UR-1 43.0 *JEDEC registered data except that I ZM NOTES: 1. 2. 3. MAXIMUM MAXIMUM REVERSE MAXIMUM dc VOLTAGE LEAKAGE CURRENT ZENER REGULATION CURRENT* (Note 2 & 3) I ZT IR @ VR I ZM V Z A A Volts Volts mA 50 0.70 7.5 1.0 240 50 0.70 5.0 1.0 220 50 0.75 4.0 1.0 200 50 0.80 2.0 1.0 190 50 0.85 1.0 1.0 180 50 0.90 0.8 1.0 170 50 0.95 7.5 1.5 160 50 0.95 7.5 2.0 150 50 0.97 5.0 2.0 140 50 0.99 4.0 2.0 130 50 0.99 10.0 3.0 120 50 0.97 10.0 3.0 110 50 0.96 10.0 4.0 100 50 0.95 10.0 5.0 90 50 0.90 10.0 5.1 70 50 0.75 10.0 5.7 63.6 50 0.50 1.0 6.2 58.0 50 0.10 1.0 6.6 54.8 50 0.08 1.0 6.9 52.4 50 0.10 1.0 7.6 49.6 50 0.11 0.05 8.4 43.2 50 0.12 0.05 9.1 40.8 50 0.13 0.05 9.8 38.0 50 0.14 0.05 10.6 35.0 50 0.15 0.05 11.4 32.6 50 0.16 0.05 12.1 30.8 50 0.17 0.05 12.9 29.0 50 0.18 0.05 13.6 26.4 50 0.19 0.05 14.4 25.0 50 0.20 0.01 15.2 23.8 50 0.22 0.01 16.7 21.6 50 0.24 0.01 18.2 19.8 50 0.25 0.01 19.0 19.0 50 0.27 0.01 20.4 17.6 50 0.28 0.01 21.2 17.0 50 0.30 0.01 22.8 15.8 50 0.33 0.01 25.0 14.4 50 0.36 0.01 27.3 13.2 50 0.39 0.01 29.6 12.2 50 0.43 0.01 32.6 11.0 has been increased (doubled) for 500 mW power dissipation capabilities. All types as shown are +/-5% tolerance. Also available in 2% and 1% tolerance. V Z @ 100 A minus V Z @ 10 A. The electrical characteristics are measured after allowing the device to stabilize for 20 seconds when mounted with 3/8" minimum lead length from the base. T4-LDS-0240-1, Rev. 2 (120722) (c)2012 Microsemi Corporation Page 3 of 5 1N4678UR-1 thru 1N4717UR-1 PD RATED POWER DISSIPATION - mW GRAPHS TEC TA T EC - END CAP TEMPERATURE (oC) or T A on FR4 PC BOARD TYPICAL CAPACITANCE IN PICOFARADS (Pf) FIGURE 1 POWER DERATING CURVE At zero volts At -2 volts (VR) ZENER VOLTAGE V Z FIGURE 2 CAPACITANCE vs. ZENER VOLTAGE (TYPICAL) T4-LDS-0240-1, Rev. 2 (120722) (c)2012 Microsemi Corporation Page 4 of 5 1N4678UR-1 thru 1N4717UR-1 PACKAGE DIMENSIONS INCH MIN MAX 0.063 0.067 0.130 0.146 0.016 0.022 DIM A B C MILLIMETERS MIN MAX 1.60 1.70 3.30 3.70 0.41 0.55 PAD LAYOUT A B C T4-LDS-0240-1, Rev. 2 (120722) (c)2012 Microsemi Corporation inch .200 .055 .080 mm 5.08 1.40 2.03 Page 5 of 5