FTR-P4 SERIES COMPACT POWER TWIN RELAY 1POLE X 2, H-BRIDGE--25 A FOR AUTOMOTIVE APPLICATIONS FTR-P4 Series FEATURES Compact for high density packaging. (60% volume of previous generation FBR512). High contact capacity with proven contact material. (100,000 operations, 14 V, 25 A achieved, even with reduced size). Coil power savings (600mW nominal achieved with state-of-the-art magnetic analysis/ design). 125C version is available. Ease of PCB layout (all terminals on perimeter, coil and contact terminals separated). Pin compatible with low acoustic noise relay, FTR-P2. Optional over-voltage circuit breaking capability (0.6mm gap, contact our representative). Packaging for auto-insertion (tube packing, 30 relays/tube). ORDERING INFORMATION [Example] FTR-P4 (a) C (b) N (c) 012 W1 (d) (e) *** (f) (a) Series Name FTR-P4 Series (b) Contact Arrangement C : 1 Form C x 2 (H-Bridge) (c) Contact Gap N P : 0.3mm gap : 0.6mm gap (d) Nominal Coil Voltage 009 010 012 : 9VDC : 10VDC : 12VDC (e) Contact Material W1 : Silver-tin oxide-indium (f) Custom Designation Nil -01 : Standard (85C) : High temperature (125C) Note: The part number stamped on the relay cover does not include "FTR". Example: Ordering part number: FTR-P4CN012W1 Stamped on part number: P4CN012W1 TYPICAL APPLICATIONS Power window Door lock Power seat Sun roof Tilt steering Retractable antenna 1 FTR-P4 SERIES SPECIFICATIONS Specification Item Standard Contact High Temperature version Arrangement 1 form C x 2 (H-Bridge) Material Silver-tin oxide-indium Voltage Drop (Resistance) Maximum 100 m Rating 25 A at 14 VDC (locked motor load) Maximum Carrying Current 25 A / 1 hour (20 C, 100% rated coil voltage) Maximum Inrush Current (Reference) 35 A Maximum Switching Current (Reference) 35 A at 16 VDC (at 2 A 12 VDC) Minimum Switching Load*1 (Reference) 1 A, 6 VDC Operating Temperature Range -40 C to +85 C (no frost) -40 C to +125 C (no frost) Storage Temperature Range -40 C to+100 C (no frost) Operate (at nominal voltage) Maximum 10ms (not including bounce) Release (at nominal voltage) Maximum 5ms (not including bounce, no diode) Maximum 15ms (not including bounce, with diode) Mechanical 10 x 106 operations minimum Electrical 100 x 103 operations minimum 14 VDC, 25 A (locked motor load) (1 operation = 1 forward, 1 reverse) Coil Timing Values Life Vibration Resistance Shock Resistance Other Operational 10-55Hz, 1.5mm double amplitude (=9.13G @ 55Hz) 55-100Hz, 45m/sec2 (4.6G) Operational 100 m/s2 minimum (10G) Endurance 1, 000 m/s2 minimum (100G) Insulation Resistance (initial) 100M ohms @500 VAC Dielectric Withstanding Voltage (initial) 500 VAC Weight -40 C to +125 C (no frost) Approximately 9.0g *1 Values when switching a resistive load at normal room temperature and humidity and in a clean environment. The minimum switching load varies with the switching frequency and operating environment. 2 FTR-P4 SERIES COIL DATA CHART FTR-P4 Series Model Coil Nominal Resistance Coil (10% at Voltage 20 C) Must Operate Voltage Must Release Voltage (at 20 C) Coil Power at Nominal Voltage Thermal Resistance (approx.) FTR-P4CN009W1 ( ) 9VDC 135 5.5VDC (at 20 C) 6.9VDC (at 85 C) 0.75VDC 0.6W 73 C/W FTR-P4CN010W1 ( ) 10VDC 167 6.3VDC (at 20 C) 7.9VDC (at 85 C) 0.9VDC 0.6W 73 C/W FTR-P4CN012W1 ( ) 12VDC 240 7.3VDC (at 20 C) 9.2VDC (at 85 C) 1.0VDC 0.6W 73 C/W Note: ( ) is "Nil" or "-01" 3 FTR-P4 SERIES CHARACTERISTIC DATA 1. LIFE TEST (EXAMPLES) M * Change of operate and release voltage Percent of nominal coil voltage (%) * Test item 14 V DC-25 A locked motor 100K operations* minimim 0.25 seconds ON, 9.75 seconds OFF 100 80 OPERATE 60 40 20 RELEASE 0 20 * Current wave form 10 sec 100 * Change in contact resistance 500 1000 (Measured at 6 VDC, 1A wet) 1000 0A Contact Resistance (m) (RL-1) 25 A 50 Number of operations* (x 103 times) Initial 100 (RL-2) 25 A 0A 0.25 sec 0.25 sec 5 sec 10 1 * 1 operation = 1 forward and 1 reverse 20 Initial 50 100 500 1000 Number of operations* (x 103 times) 4 FTR-P4 SERIES 3. COIL TEMPERATURE RISE 2. MAXIMUM BREAK CAPACITY 100 Motor lock load Coil temperature rise (degrees C) Switching current (A) 50 P4CP 20 P4CN 10 5 2 Ambient temperature: 20C 120 100 0.6 W Contact carrying current: 20A 80 60 0.6 W Contact carrying current: 10A 0.6 W 40 Contact carrying current: 0.0A 20 0 0 1 10 12 14 16 20 25 30 10 20 30 Applied time (minutes) Source voltage (VDC) Ratio of coil voltage to nominal voltage (%) 4. OPERATING COIL VOLTAGE RANGE 140 120 Continuous operating range at 10A carry current 100 80 60 e oltag rate v -ope Must 40 -30 -20 0 20 40 60 80 100 Ambient temperature C 5 FTR-P4 SERIES 5. VIBRATION RESISTANCE CHARACTERISTIC 5 Dual amplitude (mm) 1 0.5 0.1 0.01 Acceleration 100 50 44 m/s2 Range where chattering occurs Break contact Coil deenergized on X-axis On vehicle Electronic equipment Standard 10 10 50 100 500 1000 Frequency : 10~2000 Hz Acceleration : 100 m/s2 maximum Vibration direction : see drawing below Detection level : generation of 1 ms or longer contact opening Z FTR-P4 X 2000 Y Frequency (Hz) 6. SHOCK RESISTANCE CHARACTERISTIC Shock level (m/s2) 1,000 Shock duration: 111 ms, half-sine wave Test condition: coil, energized and de-energized Impact direction: see drawing below Detection level : generation of 1ms or longer contact opening Y2 800 600 Y1 400 Z2 X2 Y1 Y2 Impact direction Z1 X2 Z1 0 X1 X1 FTR-P4 200 Z2 : Break contact (coil de-energized) : Make contact (coil energized) REFERENCE DATA Operating/release voltage distribution Operate and release time distribution 100 100 Operate Release Data: FTR-P4 Units: n = 100 Data: FTR-P4 Units: n = 100 80 60 40 Distribution (%) Distribution (%) Distribution (%) Data: FTR-P4 Units: n = 100 80 80 60 40 20 20 0 0 10 20 30 ,, ,, ,, 40 50 60 Ratio to rated voltage (%) 0 70 80 Contact resistance distribution 100 Operate Release 60 40 20 ,, ,,, 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7 Time (ms) ,, ,, 0 0 10 20 30 40 50 60 70 80 Contact resistance (m) 6 FTR-P4 SERIES DIMENSIONS AND SCHEMATICS Dimensions Recommended PCB hole layout and schematic (Bottom view) 7-o1.5 6 P4CN012W1 6 F&T 17.4+0.5 14.2+0.5 5 5 5 3.5+0.5 0.4 13.5+0.5 (1.2) 5.0 5.0 6.0 3-0.8 6.0 5.0 Unit: mm 3-0.25 4-1.0 4-0.4 PRECAUTIONS Please refer to the Engineering Reference in our relay databook for general precautions. Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: www.fceu.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: marcom@fcai.fujitsu.com Web: www.fcai.fujitsu.com Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #04-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@fcal.fujitsu.com www.fcal.fujitsu.com (c) 2003 Fujitsu Components America, Inc. All company and product names are trademarks or registered trademarks of their respective owners. Rev. 10/03/2003 7