LMS1585A , LMS1587 www.ti.com SNVS061G - MONTH 2003 - REVISED JULY 2013 LMS1585A 5A/LMS1587 5A and 3A Low Dropout Fast Response Regulators Check for Samples: LMS1585A , LMS1587 FEATURES DESCRIPTION * Fast Transient Response * Available in Adjustable, 1.5V, and 3.3V versions * Current Limiting and Thermal Protection * Commercial Temp. Tange: 0C to 125C * Industrial Temp. Range: -40C to 125C * Line Regulation 0.005% (typical) * Load Regulation 0.05% (typical) * Direct Replacement for LT(R) 1585A/87 The LMS1585A and LMS1587 are low dropout positive regulators with output load current of 5A and 3A respectively. Their low dropout voltage (1.2V) and fast transient response make them an excellent solution for low voltage microprocessor applications. 1 234 APPLICATIONS * * * * Pentium(R) processor supplies PowerPC(R) supplies Other microprocessor supplies Low voltage logic supplies The LMS1585A/87 are available in adjustable versions, which can set the output voltage with only two external resistors. In addition, they are also available in 1.5V and 3.3V fixed voltage versions (1). The LMS1585A/87 circuits include a zener trimmed bandgap reference, current limiting and thermal shutdown. The LMS1585A/87 series are available in KTT (TO-263) and NDE (TO-220) packages. (1) Consult factory for other fixed voltage options. Typical Application VIN 4.75V 3.3V 3A, 5A LMS1585A/87-3.3 + + C1 10 F C2* 10 F * Required for Stability VOUT INPUT OUTPUT ADJ/GND Figure 1. NDE (TO-220) (Top View) INPUT Tab is VOUT OUTPUT ADJ/GND Figure 2. KTT (TO-263) (Top View) 1 2 3 4 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PowerPC is a registered trademark of IBM. Pentium is a registered trademark of Intel Corporation. LT is a registered trademark of Linear Technology. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright (c) 2003-2013, Texas Instruments Incorporated LMS1585A , LMS1587 SNVS061G - MONTH 2003 - REVISED JULY 2013 www.ti.com VIN Thermal Limit VOUT Substrate GND (Fixed Output) tADJ. (Adjustable Output)ttt Table 1. LMS1585A/LMS1587 Device Options Part Number Output Voltage LMS1585AIS-1.5 1.5V LMS1585AIS-3.3 3.3V LMS1585ACS-ADJ Adjustable LMS1585ACS-1.5 1.5V LMS1585ACS-3.3 3.3V LMS1585ACT-1.5 1.5V LMS1585ACT-3.3 3.3V LMS1587IS-ADJ Adjustable LMS1587IS-1.5 1.5V LMS1587IS-3.3 3.3V LMS1587CS-ADJ Adjustable LMS1587CS-3.3 3.3V LMS1587CS-1.5 1.5V LMS1587IT-1.5 1.5V LMS1587CT-ADJ Adjustable LMS1587CT-3.3 3.3V Operating Temperature Package Drawing Package Type Output Current -40C to 125C KTT TO-263 5A NDE TO-220 5A KTT TO-263 0C to 125C -40C to 125C 0C to 125C 3A -40C to 125C 0C to 125C NDE TO-220 These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates. 2 Submit Documentation Feedback Copyright (c) 2003-2013, Texas Instruments Incorporated Product Folder Links: LMS1585A LMS1587 LMS1585A , LMS1587 www.ti.com SNVS061G - MONTH 2003 - REVISED JULY 2013 ABSOLUTE MAXIMUM RATINGS (1) (2) Maximum Input to Output Voltage (VIN to GND) Power Dissipation 13V (3) Internally Limited Junction Temperature (TJ) (3) 150C Storage Temperature Range -65C to 150C Lead Temperature 260C, 10 sec ESD Tolerance (4) (1) (2) (3) (4) 2000V Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is intended to be functional, but specific performance is not ensured. For ensured specifications and the test conditions, see the Electrical Characteristics. If Military/Aerospace specified devices are required, please contact the TI Sales Office/ Distributors for availability and specifications. The maximum power dissipation is a function of TJ(max) , JA, and TA. The maximum allowable power dissipation at any ambient temperature is PD = (TJ(max)-T A)/JA. All numbers apply for packages soldered directly into a PC board. For testing purposes, ESD was applied using human body model, 1.5 k in series with 100 pF. Copyright (c) 2003-2013, Texas Instruments Incorporated Product Folder Links: LMS1585A LMS1587 Submit Documentation Feedback 3 LMS1585A , LMS1587 SNVS061G - MONTH 2003 - REVISED JULY 2013 www.ti.com ELECTRICAL CHARACTERISTICS Typicals and limits appearing in normal type apply for TJ = 25C. Limits appearing in Boldface type apply over the entire junction temperature range for operation, 0C to 125C for commercial grade and -40C to 125C for industrial grade. Symbol VREF Reference Voltage VOUT Output Voltage VOUT Line Regulation VIN-VOUT 4 (3) Load Regulation (3) VOUT (1) (2) (3) Parameter Dropout Voltage Min (1) Typ (2) Max (1) Units LMS1585A-ADJ VIN-VOUT = 3V, IOUT = 10mA 10mA IOUT 5A, 1.5V VIN- VOUT 5.75V 1.238 1.225 1.250 1.250 1.262 1.275 V V LMS1587-ADJ 10mA IOUT 3A, 1.5V VIN-VOUT 5.75V 1.225 1.250 1.275 V LMS1585A-1.5 IOUT = 0mA, VIN = 5V 0 IOUT 5A, 3V VIN 7V 1.485 1.470 1.500 1.515 1.530 V V LMS1585A-3.3 I OUT = 0mA, V IN = 5V 0 I OUT 5A, 4.75V V IN 7V 3.267 3.235 3.300 3.300 3.333 3.365 V V LMS1587-1.5 V IN = 5V, I OUT = 0mA, TJ = 25C 0 I OUT 3A, 3V VIN 7V 1.485 1.470 1.500 1.500 1.515 1.530 V V LMS1587-3.3 0 I OUT 3A, 4.75V VIN 7V 3.235 3.300 3.365 V LMS1585A/87-ADJ IOUT = 10mA, 2.75V V IN 7V 0.005 0.2 % LMS1585A/87-3.3 I OUT = 0mA, 4.75V VIN 7V 0.005 0.2 % LMS1585A/87-1.5 I OUT = 0mA, 3V VIN 7V Conditions 0.005 0.2 % LMS1585A-ADJ VIN-VOUT = 3V, 10mA IOUT 5A % 0.05 0.3 0.5 LMS1585A-1.5/LMS1585A-3.3 VIN = 5V, 0 IOUT 5A 0.05 0.05 0.3 0.5 % LMS1587-ADJ VIN-VOUT = 3V, 10mA IOUT 3A 0.05 0.05 0.3 0.5 % LMS1587-1.5/LMS1587-3.3 VIN = 5V, 0 IOUT 3A 0.05 0.05 0.3 0.5 % % LMS1585A-ADJ/LMS1587-ADJ VREF = 1%, IOUT = 3A 1.15 1.3 V LMS1585A-3.3/LMS1587-3.3/ LMS1585A-1.5/LMS1587-1.5 VOUT = 1%, IOUT = 3A 1.15 1.3 V LMS1585A-ADJ VREF = 1%, IOUT = 5A 1.2 1.4 V LMS1585A-1.5/LMS1585A-3.3 VOUT = 1%, IOUT = 5A 1.2 1.4 V All limits are specified by testing or statistical analysis. Typical Values represent the most likely parametric norm. Load and line regulation are measured at constant junction temperature, and are ensured up to the maximum power dissipation of 30W. Power dissipation is determined by the input/output differential and the output current. Ensured maximum power dissipation will not be available over the full input/output range. Submit Documentation Feedback Copyright (c) 2003-2013, Texas Instruments Incorporated Product Folder Links: LMS1585A LMS1587 LMS1585A , LMS1587 www.ti.com SNVS061G - MONTH 2003 - REVISED JULY 2013 ELECTRICAL CHARACTERISTICS (continued) Typicals and limits appearing in normal type apply for TJ = 25C. Limits appearing in Boldface type apply over the entire junction temperature range for operation, 0C to 125C for commercial grade and -40C to 125C for industrial grade. ILIMIT Current Limit LMS1585A-ADJ/LMS1585A-3.3/LMS1585A-1.5 VIN-VOUT = 5.5V 5.0 6.6 A LMS1587-ADJ/LMS1587-3.3/LMS1587-1.5 VIN-VOUT = 5.5V 3.1 4.3 A Minimum Load Current (4) LMS1585A/87-ADJ 1.5V VIN-VOUT 5.75V Quiescent Current LMS1585A-3.3/LMS1587-3.3/ LMS1585A-1.5/LMS1587-1.5 VIN = 5V Thermal Regulation TA = 25C, 30ms Pulse Ripple Rejection LMS1585A-ADJ fRIPPLE = 120Hz, VIN-VOUT = 3V, IOUT = 5A, COUT = 25F Tantalum LMS1585A-1.5 fRIPPLE = 120Hz, COUT = 25F Tantalum, IOUT = 5A, VIN = 4.5V 7.0 13.0 mA 0.003 %/W 72 dB dB 72 dB LMS1587-ADJ fRIPPLE = 120 Hz, VIN-VOUT = 3V, IOUT = 3A COUT = 25 F Tantalum 72 dB 72 dB 72 dB Adjust Pin Current 60 55 10mA IOUT IFULLLOAD, 1.5V VIN-VOUT 5.75V (5) Adjust Pin Current mA 72 LMS1587-3.3 fRIPPLE = 120 Hz, COUT = 25F Tantalum, IOUT = 3A, VIN = 6.3V Temperature Stability (4) (5) 10.0 LMS1585A-3.3 fRIPPLE = 120Hz, COUT = 25F Tantalum, IOUT = 5A, VIN = 6.3V LMS1587-1.5 fRIPPLE = 120 Hz, COUT = 25F Tantalum, IOUT = 3A, VIN = 4.5V 60 2.0 120 A 0.2 A 0.5 % Long Term Stability TA = 125C, 1000Hrs 0.03 % RMS Output Noise (% of VOUT) 10Hz f 10kHz 0.003 % Thermal Resistance Junction-to-Case 3-Lead KTT (TO-263): Control/Output Section 3-Lead NDE (TO-220): Control/Output Section 0.65/2.7 0.65/2.7 *C/W *C/W The minimum output current required to maintain regulation. IFULLLOAD is 5A for LMS1585A and 3A for LMS1587. Copyright (c) 2003-2013, Texas Instruments Incorporated Product Folder Links: LMS1585A LMS1587 Submit Documentation Feedback 5 LMS1585A , LMS1587 SNVS061G - MONTH 2003 - REVISED JULY 2013 www.ti.com APPLICATION NOTE OUTPUT VOLTAGE The adjustable version develops at 1.25V reference voltage, (VREF), between the output and the adjust terminal. As shown in Figure 3, this voltage is applied across resistor R1 to generate a constant current I1. This constant current then flows through R2. The resulting voltage drop across R2 adds to the reference voltage to sets the desired output voltage. The current IADJ from the adjustment terminal introduces an output error. But since it is small (120A max), it becomes negligible when R1 is in the 100 range. For fixed voltage devices, R1 and R2 are integrated inside the devices. VIN VIN VOUT VOUT ADJ I1 VREF R1 10 F 10 F IADJ R2 R2) + IADJR2 VOUT = VREF (1 + R2 R1 Figure 3. Basic Adjustable Regulator 6 Submit Documentation Feedback Copyright (c) 2003-2013, Texas Instruments Incorporated Product Folder Links: LMS1585A LMS1587 PACKAGE OPTION ADDENDUM www.ti.com 9-Jun-2020 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (C) Device Marking (4/5) LMS1585ACS-1.5 NRND DDPAK/ TO-263 KTT 3 45 TBD Call TI Call TI 0 to 125 LMS1585 ACS-1.5 LMS1585ACS-1.5/NOPB ACTIVE DDPAK/ TO-263 KTT 3 45 Green (RoHS & no Sb/Br) SN Level-3-245C-168 HR 0 to 125 LMS1585 ACS-1.5 LMS1585ACS-3.3 NRND DDPAK/ TO-263 KTT 3 45 TBD Call TI Call TI 0 to 125 LMS1585 ACS-3.3 LMS1585ACS-3.3/NOPB ACTIVE DDPAK/ TO-263 KTT 3 45 Green (RoHS & no Sb/Br) SN Level-3-245C-168 HR 0 to 125 LMS1585 ACS-3.3 LMS1585ACSX-1.5/NOPB ACTIVE DDPAK/ TO-263 KTT 3 500 Green (RoHS & no Sb/Br) SN Level-3-245C-168 HR 0 to 125 LMS1585 ACS-1.5 LMS1585ACSX-3.3/NOPB ACTIVE DDPAK/ TO-263 KTT 3 500 Green (RoHS & no Sb/Br) SN Level-3-245C-168 HR 0 to 125 LMS1585 ACS-3.3 LMS1585ACSX-ADJ/NOPB ACTIVE DDPAK/ TO-263 KTT 3 500 Green (RoHS & no Sb/Br) SN Level-3-245C-168 HR 0 to 125 LMS1585 ACS-ADJ LMS1585ACT-1.5/NOPB ACTIVE TO-220 NDE 3 45 Green (RoHS & no Sb/Br) SN Level-1-NA-UNLIM 0 to 125 LMS1585ACT 1.5 LMS1585ACT-3.3/NOPB ACTIVE TO-220 NDE 3 45 Green (RoHS & no Sb/Br) SN Level-1-NA-UNLIM 0 to 125 LMS1585 ACT-3.3 LMS1585AIS-1.5 NRND DDPAK/ TO-263 KTT 3 45 TBD Call TI Call TI -40 to 125 LMS1585 AIS-1.5 LMS1585AIS-1.5/NOPB ACTIVE DDPAK/ TO-263 KTT 3 45 Green (RoHS & no Sb/Br) SN Level-3-245C-168 HR -40 to 125 LMS1585 AIS-1.5 LMS1585AIS-3.3/NOPB ACTIVE DDPAK/ TO-263 KTT 3 45 Green (RoHS & no Sb/Br) SN Level-3-245C-168 HR -40 to 125 LMS1585 AIS-3.3 LMS1585AISX-3.3/NO ACTIVE DDPAK/ TO-263 KTT 3 500 Green (RoHS & no Sb/Br) SN Level-3-245C-168 HR -40 to 125 LMS1585 AIS-3.3 LMS1587CS-1.5/NOPB ACTIVE DDPAK/ TO-263 KTT 3 45 Green (RoHS & no Sb/Br) SN Level-3-245C-168 HR 0 to 125 LMS1587 CS-1.5 LMS1587CS-3.3/NOPB ACTIVE DDPAK/ TO-263 KTT 3 45 Green (RoHS & no Sb/Br) SN Level-3-245C-168 HR 0 to 125 LMS1587 CS-3.3 LMS1587CS-ADJ NRND DDPAK/ TO-263 KTT 3 45 TBD Call TI Call TI 0 to 125 LMS1587 CS-ADJ LMS1587CS-ADJ/NOPB ACTIVE DDPAK/ TO-263 KTT 3 45 Green (RoHS & no Sb/Br) SN Level-3-245C-168 HR 0 to 125 LMS1587 CS-ADJ Addendum-Page 1 Samples PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 9-Jun-2020 Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (C) Device Marking (4/5) LMS1587CSX-1.5/NOPB ACTIVE DDPAK/ TO-263 KTT 3 500 Green (RoHS & no Sb/Br) SN Level-3-245C-168 HR 0 to 125 LMS1587 CS-1.5 LMS1587CSX-3.3/NOPB ACTIVE DDPAK/ TO-263 KTT 3 500 Green (RoHS & no Sb/Br) SN Level-3-245C-168 HR 0 to 125 LMS1587 CS-3.3 LMS1587CSX-ADJ/NOPB ACTIVE DDPAK/ TO-263 KTT 3 500 Green (RoHS & no Sb/Br) SN Level-3-245C-168 HR 0 to 125 LMS1587 CS-ADJ LMS1587CT-3.3 NRND TO-220 NDE 3 45 TBD Call TI Call TI 0 to 125 LMS1587 CT-3.3 LMS1587CT-3.3/NOPB ACTIVE TO-220 NDE 3 45 Green (RoHS & no Sb/Br) SN Level-1-NA-UNLIM 0 to 125 LMS1587 CT-3.3 LMS1587CT-ADJ/NOPB ACTIVE TO-220 NDE 3 45 Green (RoHS & no Sb/Br) SN Level-1-NA-UNLIM 0 to 125 LMS1587 CT-ADJ LMS1587IS-1.5 NRND DDPAK/ TO-263 KTT 3 45 TBD Call TI Call TI -40 to 125 LMS1587 IS-1.5 LMS1587IS-1.5/NOPB ACTIVE DDPAK/ TO-263 KTT 3 45 Green (RoHS & no Sb/Br) SN Level-3-245C-168 HR -40 to 125 LMS1587 IS-1.5 LMS1587IS-3.3 NRND DDPAK/ TO-263 KTT 3 45 TBD Call TI Call TI -40 to 125 LMS1587 IS-3.3 LMS1587IS-3.3/NOPB ACTIVE DDPAK/ TO-263 KTT 3 45 Green (RoHS & no Sb/Br) SN Level-3-245C-168 HR -40 to 125 LMS1587 IS-3.3 LMS1587IS-ADJ NRND DDPAK/ TO-263 KTT 3 45 TBD Call TI Call TI -40 to 125 LMS1587 IS-ADJ LMS1587IS-ADJ/NOPB ACTIVE DDPAK/ TO-263 KTT 3 45 Green (RoHS & no Sb/Br) SN Level-3-245C-168 HR -40 to 125 LMS1587 IS-ADJ LMS1587ISX-3.3/NOPB ACTIVE DDPAK/ TO-263 KTT 3 500 Green (RoHS & no Sb/Br) SN Level-3-245C-168 HR -40 to 125 LMS1587 IS-3.3 LMS1587ISX-ADJ/NOPB ACTIVE DDPAK/ TO-263 KTT 3 500 Green (RoHS & no Sb/Br) SN Level-3-245C-168 HR -40 to 125 LMS1587 IS-ADJ LMS1587IT-1.5/NOPB ACTIVE TO-220 NDE 3 45 Green (RoHS & no Sb/Br) SN Level-1-NA-UNLIM -40 to 125 LMS1587 IT-1.5 (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. Addendum-Page 2 Samples PACKAGE OPTION ADDENDUM www.ti.com 9-Jun-2020 (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of <=1000ppm threshold. Antimony trioxide based flame retardants must also meet the <=1000ppm threshold requirement. (3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. (5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Device Marking for that device. (6) Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish value exceeds the maximum column width. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 3 PACKAGE MATERIALS INFORMATION www.ti.com 15-Sep-2018 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant LMS1585ACSX-1.5/NOPB DDPAK/ TO-263 KTT 3 500 330.0 24.4 10.75 14.85 5.0 16.0 24.0 Q2 LMS1585ACSX-3.3/NOPB DDPAK/ TO-263 KTT 3 500 330.0 24.4 10.75 14.85 5.0 16.0 24.0 Q2 LMS1585ACSX-ADJ/NOP DDPAK/ B TO-263 KTT 3 500 330.0 24.4 10.75 14.85 5.0 16.0 24.0 Q2 DDPAK/ TO-263 KTT 3 500 330.0 24.4 10.75 14.85 5.0 16.0 24.0 Q2 LMS1587CSX-1.5/NOPB DDPAK/ TO-263 KTT 3 500 330.0 24.4 10.75 14.85 5.0 16.0 24.0 Q2 LMS1587CSX-3.3/NOPB DDPAK/ TO-263 KTT 3 500 330.0 24.4 10.75 14.85 5.0 16.0 24.0 Q2 LMS1587CSX-ADJ/NOPB DDPAK/ TO-263 KTT 3 500 330.0 24.4 10.75 14.85 5.0 16.0 24.0 Q2 DDPAK/ TO-263 KTT 3 500 330.0 24.4 10.75 14.85 5.0 16.0 24.0 Q2 LMS1587ISX-ADJ/NOPB DDPAK/ TO-263 KTT 3 500 330.0 24.4 10.75 14.85 5.0 16.0 24.0 Q2 LMS1585AISX-3.3/NO LMS1587ISX-3.3/NOPB Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 15-Sep-2018 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) LMS1585ACSX-1.5/NOPB DDPAK/TO-263 KTT 3 500 367.0 367.0 45.0 LMS1585ACSX-3.3/NOPB DDPAK/TO-263 KTT 3 500 367.0 367.0 45.0 LMS1585ACSX-ADJ/NOP B DDPAK/TO-263 KTT 3 500 367.0 367.0 45.0 LMS1585AISX-3.3/NO DDPAK/TO-263 KTT 3 500 367.0 367.0 45.0 LMS1587CSX-1.5/NOPB DDPAK/TO-263 KTT 3 500 367.0 367.0 45.0 LMS1587CSX-3.3/NOPB DDPAK/TO-263 KTT 3 500 367.0 367.0 45.0 LMS1587CSX-ADJ/NOPB DDPAK/TO-263 KTT 3 500 367.0 367.0 45.0 LMS1587ISX-3.3/NOPB DDPAK/TO-263 KTT 3 500 367.0 367.0 45.0 LMS1587ISX-ADJ/NOPB DDPAK/TO-263 KTT 3 500 367.0 367.0 45.0 Pack Materials-Page 2 MECHANICAL DATA NDE0003B www.ti.com MECHANICAL DATA KTT0003B TS3B (Rev F) BOTTOM SIDE OF PACKAGE www.ti.com IMPORTANT NOTICE AND DISCLAIMER TI PROVIDES TECHNICAL AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDING REFERENCE DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES "AS IS" AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS. These resources are intended for skilled developers designing with TI products. You are solely responsible for (1) selecting the appropriate TI products for your application, (2) designing, validating and testing your application, and (3) ensuring your application meets applicable standards, and any other safety, security, or other requirements. These resources are subject to change without notice. TI grants you permission to use these resources only for development of an application that uses the TI products described in the resource. Other reproduction and display of these resources is prohibited. No license is granted to any other TI intellectual property right or to any third party intellectual property right. TI disclaims responsibility for, and you will fully indemnify TI and its representatives against, any claims, damages, costs, losses, and liabilities arising out of your use of these resources. TI's products are provided subject to TI's Terms of Sale (www.ti.com/legal/termsofsale.html) or other applicable terms available either on ti.com or provided in conjunction with such TI products. TI's provision of these resources does not expand or otherwise alter TI's applicable warranties or warranty disclaimers for TI products. Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2020, Texas Instruments Incorporated