NCD100C50SLF - NIC Components Corp.

NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com

Ceramic Disc Capacitors NCD Series Class I

TEMPERATURE COMPENSATING AND

TEMPERATURE STABLE TYPES (CLASS I)

FEATURES

• PROVIDES AN ACCURATE, PREDICTABLE LINEAR CAPACITANCE

..CHANGE WITH VARIATIONS IN OPERATING TEMPERATURE

• NPO TYPES PROVIDE DRIFT FREE PERFORMANCE

• TIGHT TOLERANCES AVAILABLE

• AVAILABLE WITH FORMED LEADS AND ON TAPE

SPECIFICATIONS

+10

-5

-10

-55 -35 -15 +5 +25 +45 +65 +85

A −NPO

B−N-150

C−N-330

D−N-750

E−N-1500

F−SL

TEM PER A TURE

PERCENT CHANGE

FROM 25OC

Temperature

Characteristics NPO N150 N750 SL N1500 N3300

Operating

Temperature Range -30°C ~ +85°C

Capacitance Range 0.5 ~ 470pF 3.0 ~ 27pF 22 ~ 470pF 0.5 ~ 1000pF 22 ~ 2200pF 47 ~ 1000pF

Standard Tolerance ±5% (J)

Capacitance Change Over

Temperature Range ±1% -1 ~ +2% -5% ~ +7.5% -5% ~ +9% -10% ~ +20% -13% ~ +12%

Q Factor (Min. 1MHz) 1000 (C>30pF)

400+20C (<30pF) 500 (C>30pF)

200+10C (<30pF)

Insulation Resistance Minimum 10,000 Megohms

Temperature Coefﬁ cient 0±60ppm N150±60ppm N750±120ppm N330±500ppm N1500±250ppm N3300±500ppm

Working Voltage Range 50Vdc ~ 1KVdc

Dielectric Withstanding

Voltage (Test Voltage) 2.5 Times Rated Voltage For Not Less Than 1 Second, 50mA Maximum

Load Life

Test @ 85°C

1,000 Hours

Cap. Change ±3% ±5% ±8% ±15% ±30% ±50% ±50%

Q Factor (min.) Shall Confom To Initial Measurements Above

I.R. (min.) 10,000 Megohms

Test Conditions <1,000pF; 1MHz, 1.2Vrms Max., >1,000pF; 1KHz, 1.2Vrms Max.

NCD 101 J500 NPO TR

Optional Packaging

TR = Taped and Reel

TB = Tape and Box (Ammo)

Optional Lead Style

C = Cut Lead

D = Inside Kink (Short Leads)

E = Outward Kink (Short Leads)

J = Inside Kink (Long Leads)

K = Outward Kink (Long Leads)

Temperature Coefﬁ cient

Working Voltage DC

Tolerance Code

C = ± 0.25pF K = ± 10%

D = ± 0.5pF M = ± 20%

J = ± 5% Z = + 80% / - 20%

Capacitance code, expressed in pfd,

First two digits are signiﬁ cant, third digit is no. of

zeros. “R” indicates decimal for under 10pfd.

Series

RoHS compliant

.1LS

Optional Lead Space (LS) and/or

Lead Length (LL) in inches

*See Part Number System for Details

NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com

Ceramic Disc Capacitors

STANDARD PRODUCTS AND MAXIMUM DIAMETER (mm) BY T.C. AND VOLTAGE

NCD Series Class I

NIC RESERVES THE RIGHT TO REQUEST MINIMUM QUANTITIES ON CERTAIN VALUES

LEAD DIAMETER

0.6MM IS STANDARD BODY THICKNESS

2 ~ 4MM DEPENDENT ON CV

(BULK ONLY)

(BULK AND TAPED STYLES)

23 min.

5 max.

J Style

1.5+0.2

4.7 + 1

5 max.

D Style

1.5+0.2

K Style

23 min.

5 max.

1.5+0.2

E Style

4.7 + 1

5 max.

1.5+0.2

23 min.

2 max.

Low Voltage

100Vdc & Below

Standard

500Vdc & Up

23 min.

3 max.

Lead Spacing (mm) - S

Body

Diameter Standard

Bulk Standard

T&R Optional Bulk

mm (inches) Optional T&R

mm (inches)

5 ~ 11 6.35 ± 0.8 5.0 ± 0.8 5.0 ± 0.8 (0.2LS) 2.5 ± 0.8 (0.1LS)

>12 6.35 ± 0.8 5.0 ± 0.8 7.5 ± 0.8 (0.295LS) 7.5 ± 0.8 (0.295LS)

10.0 ± 0.8 (0.395LS) 10.0 ± 0.8 (0.395LS)

Cap.

(pF)

NPO N150 N750 SL N1500 N3300

Working Voltage (Vdc)

100 500 1K 50

100 500 1K

0.5 ~ 18 666667- - -666------

20 666678666666------

22 666678666666666- - -

27 666789666666666- - -

33 667---667666666- - -

39 677---667666666- - -

47 678---678

666666-6-

56 778---778666666-66

68 779---779666666-66

75 779---779667667-66

82 779---779667667666

100 8 8 10 ---8810667677666

120 8 8 10 ---8810667677666

150 9 9 12 ---9912678688667

180 9 9 14 ---9914678688677

220 10 10 16 ---

101016789799777

270 12 12 16 - - - 12 12 16 8 9 10 8 9 10 7 7 7

330 14 14 18 - - - 14 14 18 8 10 12 8 10 12 7 7 8

470 16 16 20 - - - 16 16 20 9 12 14 9 12 14 7 8 9

560---------1012141014148911

680---------10141610141681011

750---------12161612161681011

820---------12161612161681011

1000 ---------141618141618101213

NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com

Ceramic Disc Capacitors Taping Speciﬁ cations

DIMENSIONS (mm)

Diameters up to

22mm max. are

available on tape. T = 2 ~ 7mm DEPENDENT

ON T.C. AND CV

AMMO PACK

* -Dimension “P” is 12.7mm, for diameters up to 12mm, and 25.4mm for diameters 13-22mm.

H ≤ 372 (14.64")

L ≤ 377 (14.84")

W ≤ 55 (2.16")

Acceptable to

standard radial type cartridge. Acceptable to standard radial type cartridge with a few

extra accessories.

D < 354 (13.93")

B > 21 (.83") but

< 30 (1.18")

W < 55 (2.16")

Dφ

REEL

Δh

P1S

Symbol D max. d P* P0P1P2SHH

0H1DφWL tΔh

Value 12.0

22.0 0.6 12.7

25.4 12.7 5.1

3.85

3.18

2.6 6.35 2.5

5.0

6.35

7.5 20.0 16.0 Max.

32.25 4.0 18.0 Max.

11.00 0.7 0

Tolerance --- +0.06

-0.05 ±1.0 ±0.2 ±0.7 ±1.0 ±0.8

-0.2 +1.5

-1.0 ±0.5 --- ±0.2 ±0.5 --- ±0.2 ±2.0