TOOL-LESS MODULAR MULTIPIN CONNECTOR Quick Multipin Series QM(R) SERIES Company Profile Radiall was founded in 1952 as a family owned company making coaxial plugs for the television industry. Today, Radiall is an international and global manufacturer of interconnect components including RF coaxial connectors, cable assemblies, antennas, fiber optic and microwave components, and multipin connectors. Radiall serves the Aerospace, Automotive, Defense, Industrial, Medical, Space, and Telecommunication industries. QSE (Quality Safety Environment) POLICY Radiall maintains a quality management system that is highly recognized by it's customers because it conforms to most international standards, including those for environmental protection. Since 1994, all Radiall sites are ISO9001 certified. As a result of Radiall's continuous improvement efforts, some dedicated activities are certified to either AS9100, or TS 16949 or ISO14001. Certain product lines are MIL ESA/SCC Qualified products. Radiall also complies with other industry directives such as RoHS for hazardous substance restrictions and EuP for environmentally friendly designs for energy-consuming products. A WORLDWIDE ENGINEERING & MANUFACTURING CAPABILITY With expertise centers and manufacturing locations in 3 continents and 12 industrial sites, Radiall offers it's customers the proximity needed to provide the best quality, service and delivery performance. Our facilities feature state of the art equipment for the many technologies involved in the design, manufacturing and assembly of interconnect solutions. Manufacturing plants based in low cost countries give Radiall the opportunity to offer quality at competitive prices. Technical information and sales contacts are available at : www.radiall.com 2 www.radiall.com Page Introduction .................................................................................................................................................................................................................................................................................................................................. 4 Application ..................................................................................................................................................................................................................................................................................................................................... 5 Product overview ..................................................................................................................................................................................................................................................................................................................... 5 Electrical characteristics .................................................................................................................................................................................................................................................................................................. 6 Mechanical and environmental characteristics .......................................................................................................................................................................................................................................... 7 Inserts part number ............................................................................................................................................................................................................................................................................................................... 8 Inserts layouts ............................................................................................................................................................................................................................................................................................................................ 9 Inserts table ................................................................................................................................................................................................................................................................................................................................. 10 Shell part number ..................................................................................................................................................................................................................................................................................................................... 11 Connector dimensions............................................................................................................................................................................................................................................................................................................ 11 Mounting device part number ....................................................................................................................................................................................................................................................................................... 12 Mounting device dimensions ......................................................................................................................................................................................................................................................................................... 13 Polarization code ....................................................................................................................................................................................................................................................................................................................... 14 CONTACTS PART NUMBERS Crimp Contacts.......................................................................................................................................................................................................................................................................................................... 15 Coaxial Crimp Contacts..................................................................................................................................................................................................................................................................................... 16 Twinax Contacts........................................................................................................................................................................................................................................................................................................ 17 Quadrax Contacts.................................................................................................................................................................................................................................................................................................... 18 BMA contacts............................................................................................................................................................................................................................................................................................................... 18 Luxcis fiber optic termini inserts and contacts.............................................................................................................................................................................................................................................. 19 Tooling and accessories........................................................................................................................................................................................................................................................................................................ 20 Products range extensions................................................................................................................................................................................................................................................................................................. 21 Part numbers index................................................................................................................................................................................................................................................................................................................... 22 3 www.radiall.com QM(R) SERIES CONTENTS QM(R) SERIES INTRODUCTION A modular Tool-less installation multipin connector Radiall QM(R) series connectors have been designed for use with in-line disconnect applications on commercial airplanes. QM connectors offer outstanding electrical performance and are designed with environmental and mechanical characteristics that provide for long lasting durability needed for the most sever aerospace applications. The QM(R) series offer a wide range of inserts solutions and a large variety of contacts. FEATURES & BENEFITS Light Weight High conductive rails Perfect, clean and efficient Exceptional quality User friendly - no tool needed Click to install Push to lock 4 www.radiall.com Interconnect solution for aerospace and harsh environment applications. PRODUCT OVERVIEW View of receptacle and plug connectors on rail The receptacle is fixed on the rail (1) Insert Integrated strain relief Option EMI backshell (2) Polarization Devices The plug mates and locks onto the receptacle (1) Option grounding block (2) Notes (1) Please refer to our user manual MIIN1700000 to have detailed mounting instructions of the QM on the rail. (2) EMI backshell and ground block are not compatible www.radiall.com 5 QM(R) SERIES APPLICATIONS QM(R) SERIES ELECTRICAL CHARACTERISTICS Contacts are per EN3155-76 and EN3155-77. Electrical characteristics conform to SAE AS 39029 (MIL-C-39029 type A). GROUND BLOCK CONTACT Contact to contact Contact to mounting surface Contact with wire size Contact + AWG20 Contact + AWG20 Max Current Amps 7.5 7.5 Wire size AWG22 AWG24 AWG26 AWG20 AWG22 AWG24 AWG16 AWG18 AWG20 AWG12 AWG14 AWG16 AWG8 AWG10 AWG8 AWG10 Max Current Amps 5 3 2 7.5 5 3 13 10 7.5 23 17 13 46 33 46 -- See note 1 33 CONTACTS Contact size 22 20 16 12 8 5 Note 1: Size 5 contacts are not part of SAE AS 39029 (MIL-C-39029 type A). They are qualified by Radiall to 46 Amps. EMI SHIELDING EFFECTIVENESS Frequency (MHz) 100 200 300 400 500 Leakage attenuation (dB) 65 63 61 59 58 DIELECTRIC WITHSTANDING VOLTAGE EIA 364-20 (mil-std-1344 / Method 3001.1) with leakage current < 1m Level Environmental inserts Voltage (VRMS) Non-environmental voltage (VRMS) Sea level 1500 1500 50 000 feet 800 600 70 000 feet 800 300 INSULATION RESISTANCE EIA 364-21 (MIL-STD-1344 / Method 3003.1) Temperature Ambient temperature 155C (+347F) Insulation resistance > 5000 M >200 M OTHER CHARACTERISTICS 6 * Shell to shell conductivity < 2.5 m , operating voltage: 400 Vrms or 500 Vdc at sea level. * Voltage stability (ground block): Maximum variation 4mV SAE AS 81714 (MIL-T-81714). * Magnetic permeability < 2 and comparative tracking index = 250 V. www.radiall.com MECHANICAL CHARACTERISTICS MATING/ UNMATING: up to 50 cycles VIBRATION AND SHOCK Vibration Shell type Material for 5 hours in each of the 3 axis/interruption < 1s EIA 364-28 (MIL-STD-1344 /Method 2005.1) QM Shock three shocks in each axis EIA 364-27 (MIL-STD-1344 /Method 2004.1) condition A 4 positions rail = Acceleration 13,8 Grms 0,2G/Hz from 10 to 400HZ and 0,03G/hz from 400 to 2000Hz 4 positions rail = Shock amplitude 50g / duration 11ms 22 positions rails = Acceleration 6,2 Grms 0.04 g/Hz from 10 to 400 Hz 0.006 g/Hz at 2000 Hz 22 positions rail = Shock amplitude 15G / duration 11ms Composite Interruption < 1s - on electrical contacts - between shells - between shel and rail RETENTION CHARACTERISTICS Contact retention EIA 364-29 (MIL-STD-1344 / Method 2007.1) on terminated connectors. Contact size Retention force Max displacement Ground block 88N (20lbs) 0.30mm (.012 in.) 22 53.4N (12lbs) 0.38mm (.015 in.) 20 89N (20 lbs) 0.38mm (.015 in.) 16 111.2N (25lbs) 0.38mm (.015 in.) 12 133.45N (30lbs) 0.38mm (.015 in.) 8 133.45N (30lbs) 0.38mm (.015 in.) 5 133.45N (30lbs) 0.38mm (.015 in.) * Insert retention: 400N (90lbs) (EIA 364-35 = MIL-STD-1344 /Method 2010.1) * Max displacement: 0.30mm (.012 in.) ENVIRONMENTAL CHARACTERISTICS TEMPERATURE * Temperature range: -65 / +155C * Temperature life: 1000H at 155C OTHER CHARACTERISTICS * Salt spray: 96 hours (Nickel plating) EIA 364-26 (MIL-STD-1344 / Method 1001.1) test condition A * Humidity: 10 days with temperature variation from -10C to +65C EIA 364-31 Method 4, test condition B (MIL-STD-1344 /Method 1002.2, type II test condition) * Altitude immersion: 3 cycles at 50 000 feet EIA 364-03 (MIL-STD-1344 /Method 1004.1) * For more detail please refer to QM product specification. 7 www.radiall.com QM(R) SERIES MECHANICAL AND ENVIRONMENTAL CHARACTERISTICS QM(R) SERIES INSERT PART NUMBER INSERT CODIFICATION EPXB E C3 Series (1 & 2) Class E: Environmental with rear grommet and interfacial seal for pin inserts Environmental with rear grommet for socket inserts H: Insert for pin contacts with a rear grommet and without interfacial seal Contact arrangement 00 - C3 - P3 - 3Q3 - 06 - 10Q2 - F12C - 12F6 (3) 13C1 - 13P1 - 14 - 17 - 20C1 - 20P1 22 - 22V - 25P1 - 25Q1 - 28 - 30 - 34 - 40- 48 Contact type PA: Pin SA: Socket Notes (1) Inserts are designed for rear release rear removable contacts (2) Pin and socket inserts can be installed in either plug or receptacle shell. (3) F12C and 12F6 inserts available only in E class and 00 insert is only available in E class 8 www.radiall.com PA The full range of environmental EN4644 insert arrangements is available. All inserts are delivered without contacts. Contacts have to be ordered separately. 00 Dummy insert C3 3 x size 5 contacts P3 3 x size 5 Power 3Q3 3 x size 8 Quadrax 06 6 x size 12 contacts 10Q2 8 x size 20 contacts 2 x size 8 Quadrax 12F6 6 x size 16 Optical LuxCis 6 x size 16 special electrical contacts F12C (high grade thermoplastic) 12 x size 16 Optical LuxCis 13C1 6 x size 20 contacts 4 x size 15 or 16 contacts 2 x size 12 contacts 1 x size 5 contacts 13P1 6 x size 20 contacts 4 x size 15 or 16 contacts 2 x size 12 contacts 1 x size 5 Power 14 14 x size 15 or 16 contacts 17 14 x size 20 contacts 3 x size 12 contacts 20C1 19 x size 20 contacts 1 x size 5 contacts 20P1 19 x size 20 contacts 1 x size 5 Power 22 16 x size 20 contacts 6 x size 15 or 16 contacts 22V 16 x size 20 contacts 6 x size 16 contacts 25P1 24 x size 22 contacts 1 x size 8 Power 25Q1 24 x size 22 contacts 1 x size 8 Quadrax 28 22 x size 22 contacts 6 x size 15 or 16 contacts 30 30 x size 20 contacts 34 18 x size 22 contacts 16 x size 20 contacts 40 40 x size 22 contacts 48 48 x size 22 contacts 9 www.radiall.com QM(R) SERIES EPXB(R) INSERTS LAYOUTS QM(R) SERIES INSERTS TABLE EPXB(R) range of inserts is used for the Quick Lock Multipin connectors. Contact Size & Type 22 Serie EPXB & QM 20 15 or 16 16 16 12 8 5 5 Power Medium LuxCis Medium Quadrax in Fiber Coax Signal Power or Fiber Power Power or Power Optic or Triax Coax optic or Coax Twinax cavity Inserts Total Contacts C3 3 P3 3 3Q3 3 06 6 10Q2 10 12F6 12 6 F12C 12 12 13C1 13 6 4 2 13P1 13 6 4 2 14 14 17 17 14 20C1 20 19 20P1 20 19 22 22 16 6 22V 22 16 6 25P1 25 24 25Q1 25 24 28 28 22 30 30 34 34 18 40 40 40 48 48 48 Signal 8 3 3 3 8 2 6 1 1 14 3 1 1 1 1 6 30 16 10 www.radiall.com SHELL CODIFICATION QM B P N 00 Series Shell Size B: Insert size B Product Type P: Plug R: Receptacle W: Plug with ground block (1) Z: Receptacle with ground block (1) Finish N: Nickel plating Polarisation 00: delivered without polarizing keys Delivered with polarizing keys not installed (without code) **: delivered with polarizing keys installed according to code (see table 2 on page 14) SINGLE SHELL DIMENSIONS Receptacle QMBRN 45g QMBZN 55g Plug QMBWN 40g QMBPN 35g 11 www.radiall.com QM(R) SERIES SHELL PART NUMBER QM(R) SERIES MATED SHELL DIMENSIONS MOUNTING DEVICE PART NUMBER MOUNTING DEVICE CODIFICATION QM U 04 A Series Mounting Device U: U shape rail single sided Number of Connector Position 01 - 04 - 06 - 08 - 10 - 15 - 18 - 22 04S - 06S - 08S - 15S - 10G - 18G (1&2) Mounting Device Material A: Aluminium Finish N: Nickel Notes (1) Other length can be developed on demand (2) Please refer to the mounting device table 1 on page 13 to have detailed information 12 www.radiall.com N The first variable (2 digits) after the basic number designates the quantity of connector positions. The second variable designates options on the rail such as mounting slots or alternative ground stud, please refer to table 1 below. Basic drawing of the QM connector rail, please refer to table 1 for detail on each part number. Table 1 - Part number list and mounting device options of the QM rail. Part number Length mm (inch) Number of mounting slots Number of ground studs Weight in (g) 04 04S 6 06S 08 08S 10 10G 15 15S 18 18G 22 199.60 (7.86) 199.60 (7.86) 246.40 (9.70) 246.40 (9.70) 293.10 (11.54) 293.10 (11.54) 258.10 (10.16) 258.10 (10.16) 457.20 (18) 457.20 (18) 501.40 (19.74) 501.40 (19.74) 620.80 (24.44) none 4 none 5 none 6 none none none 11 none none none 1 1 1 1 1 1 1 1 1 1 None 1 2 85 85 90 90 100 100 105 105 220 220 240 240 260 Example of the QMU22AN rail. Ground Stud 13 www.radiall.com QM(R) SERIES MOUNTING DEVICE DIMENSIONS QM(R) SERIES POLARIZATION CODE Easy reading of polarization code Polarization code is added at the end of the Part Number and can be seen on the polarization keys as shown below. Caution: read the polarization code according to the Part Number marking on the connector and not up-side-down. 2 female keys (1) on the receptacle (Letters as visual indicator) 2 male posts (2) on the plug (Letters as visual indicator) RECEPTACLE PLUG Coding device View shows A & D View shows C & B View shows A & B View shows C & D Table 2: the 16 possible codings for polarization code: Key position A A A A B B B B C C C C D D D D Key position A B C D A B C D A B C D A B C D Notes (1) Polarizing keys are intended for use on receptacle, use plier 617954020 to remove. (2) Polarizing posts are intended for use on plug, use plier 617954020 to remove 14 www.radiall.com Please note Radiall recommends plastic extraction tool for environmental cavities 22-20-16 and 12 (metal extraction tool leads to damage grommet). For cavities 5 and 8, the extraction tool is metallic. However, you can order a plastic extraction tool for the cavity 8 with the PN M81969/14-06. CRIMP CONTACTS Contact size Wire size Type Part number Crimping tool Positioner Ins / ext tool (6) 22 22-24-26 Pin 617200 M22520/2-01 M22520/2-23 M81969/14-01 Socket 617300 282 281 282 970 282 522 22 reduced crimp barrel 28-30 Pin 617201 (1) M22520/2-01 M22520/2-23 M81969/14-01 Socket 617301 (1) 282 281 282 970 282 522 20 20-22-24 Pin 617221 M22520/2-01 M22520/2-08 M81969/14-10 Socket 617320 282 281 282 971 282 549 029 20 reduced crimp barrel 22-24-26 Pin 617224001 (1) M22520/2-01 M22520/2-08 M81969/14-02 Socket 617324001 (1) 282 281 282 971 282 886 16 16-18-20 Pin 617240 M22520/1-01 M22520/1-02 M81969/14-03 Socket 617340 282 291 282 972 282 515 16 reduced crimp barrel 20-22-24 Pin 617241 (1) M22520/1-01 M22520/1-02 M81969/14-03 Socket 617341 (1) 282 291 282 972 282 515 16 for ground block 20 Pin 617221050 M22520/2-01 M22520/2-11 M81969/14-10 Socket N/A 282 281 282581015 282 549 029 16 for optical electrical insert 16-18-20 Pin 617235003 M22520/1-01 see note 2 282 291 16 reduced crimp barrel for optical electrical insert 20-22-24 Pin 617235002 M22520/1-01 (1 & 2) 282 291 12 12-14-16 Pin 617250 M22520/1-01 M22520/1-02 M81969/14-04 Socket 617350 282 291 282 972 282 549 004 8 8-10 5 8-10 5 12-16 Pin 617291002 (3 & 4) M22520/23-01 or R282.600.000 Socket 617391002 (3 & 4) Die set M22520/23-02 or 282581013 282581013 282588 M81969/14-03 282 515 M81969/14-03 282 515 M81696/28-03 282 549 001 Pin 617280 (3 & 5) M22520/23-01 + 282557020 M81969/28-01 Socket 617390 (3 & 5) Die set M22520/23-02 282557021 282 946 Pin 617260001 (3 & 5) 282613 282 586 003 Socket 617370001 (3 & 5) M81969/28-01 282 946 Notes (1) When smaller wire sizes are used on contacts with reduced crimp barrel, the wire won't provide sealing to the grommet. If sealing is required, please contact Radiall. (2) Electrical contacts for optical insert are always pin contacts (hermaphrodite). (3) In order to make these contacts environmental, it is necessary to add a sealing boot. Please contact us for additional information. (4) These power contacts can be used in power inserts only (25P1) (5) These power contacts can be used in power inserts only (P3, 13P1, 20P1) (6) Tools in bold are in plastic material and remaining in metal. www.radiall.com 15 QM(R) SERIES CONTACTS PART NUMBER QM(R) SERIES CONTACTS PART NUMBER COAXIAL CRIMP CONTACTS Center conductor Outer conductor Notes Non (1) In order to makeEnvironmental these contacts Environmental environmental, it isCrimping necessary to add a sealing boot, please contact Radiall for information. Ins/ext tool (2) Crimping Contact Die setand remaining in metal. Positioner Cable type Type part in plastic material part tool (2) Tools in bold aretool size number number 15-16 15-16 RG174-RG179 RG316 Pin see Note 1 617130 Socket see Note 1 617030 Pin see Note 1 617131 Socket see Note 1 617031 see Note 1 617132 see Note 1 617032 Pin see Note 1 617133 Socket see Note 1 617033 15-16 Pin see Note 1 617135 Socket see Note 1 617035 12 Pin see Note 1 617160 Socket see Note 1 617060 5 Pin see Note 1 617101 Socket see Note 1 617001 5 Pin 617 102 001 617102 Socket 617 002 001 617002 5 Pin 617 103 001 617103 Socket 617 003 001 617003 5 Pin see Note 1 617104 Socket see Note 1 617004 5 Pin see Note 1 617105 Socket see Note 1 617005 282 281 282 556 282 512 282 556 282 512 282 556 282 512 282 556 282 512 282 556 282 512 282 292 M22520/2-01 282 578 M22520/4-01 RG178 GORE/AXON Pin P812817 15-16 FILECA F1703-134 FILOTEX Socket SP132868 15-16 M22520/2-01 282 578 M22520/4-01 282 281 282 292 M22520/2-01 282 578 M22520/4-01 282 281 282 292 M22520/2-01 282 578 M22520/4-01 RG178 DT 282 281 282 292 M22520/2-01 282 578 M22520/4-01 UT .047 282 281 282 292 M81969/14-04 N/A solder termination UT.085-RG405 282 549 004 M22520/2-01 282 572 M22520/5-01 M22520/5-05 M81969/28-01 RG58-RG141 RG142-RG223 RG400 RG174-RG316 RG188 282 281 282 293 282 246 M22520/2-01 282 572 M22520/5-01 M22520/5-05 282 281 282 293 282 246 M22520/2-01 282 572 M22520/5-01 M22520/5-05 282 281 282 293 282 246 M22520/2-01 282 572 M22520/5-01 M22520/5-05 282 946 M81969/28-01 282 946 M81969/28-01 282 946 M81969/28-01 RG178-RG196 282 281 282 293 282 246 M22520/2-01 282 572 M22520/5-01 M22520/5-05 282 946 M81969/28-01 RG180 282 281 16 www.radiall.com 282 293 282 246 282 946 CONTACTS FOR TWINAX CABLE Center conductor Contact Environmental Non Environmental size Cable type Type Part number Part number & type Pin see Note 1 617 190 010 Socket see Note 1 617 090 010 Pin see Note 1 617 190 012 Socket see Note 1 617 090 012 282 281 Pin 617 165 021 617 165 020 M22520/5-01 2447 Socket 617 065 021 /03159X-2 617 065 020 282 293 12 Triax ECS0700 12 Triax M17/17600002 TENSOLITE 8 Triax 8 Triax Crimping tool WHITMOR W26751575 8 ABS0386WF24 Twinax 8 TYCO Twinax 1726A1424A M22520/5-01 Socket 617 065 617 065 001 282 293 Pin 617 165 011 620 165 010 Socket 617 065 011 620 065 010 Pin M17/176-0002 5 Triax PAN6421 620 165 010 620 065 010 282 297 282 297 282 560 282 236 M22520/5-01 M22520/5-104 282 293 282 281 282 581 010 M81969/14-04 282 293 M81969/28-03 or M81969/14-06 282 549 001 M81969/28-03 or M81969/14-06 282 549 001 M81969/28-03 or M81969/14-06 282 236 282 549 001 M22520/2-01 Daniels K709 M22520/5-01 M22520/5-45 M81969/28-03 or M81969/14-06 282 281 282 581 010 282 560 617150 M22520/2-01 Socket 617 050 001 617050 282 281 617 152 001 617 152 M22520/2-01 Socket 617 052 001 617 052 282 281 282 293 M81969/14-04 282 549 004 M22520/5-01 M22520/5-05 282 293 Ins/ext tool (2) 282 549 004 M22520/2-01 Daniels K709 M22520/5-01 M22520/5-45 617 150 001 Pin Die set M22520/2-01 282 581 004 M22520/31-01 282 581 005 617 165 001 Socket 617 065 011 5 Triax 282 281 617 165 617 165 011 Crimping tool M22520/2-01 282 581 004 M22520/31-01 282 581 005 Pin Pin Positioner Outer conductor 282 293 282 549 001 M22520/5-01 M22520/5-05 M81969/28-01 282 293 282 560 282 236 282 246 282 946 M22520/5-01 M22520/5-05 M81969/28-01 282 293 282 246 282 946 Notes ((1) In order to make these contacts environmental, it is necessary to add a sealing boot, please contact us for information. (2) Tools in bold are in plastic material and remaining in metal. 17 www.radiall.com QM(R) SERIES CONTACTS PART NUMBER QM(R) SERIES CONTACTS PART NUMBER QUADRAX CONTACTS Center conductor Contact Cable type size Type Ethernet cable Environmental Non Environmental Crimping tool Positioner Part number Part number Pin 617 175 011 620 175 010 ABS0972 & Socket ABS1503 617 075 011 620 075 010 TENSOLITE 617 175 051 620 175 050 617 075 051 620 075 050 Outer conductor Crimping tool M22520/2-01 Daniels K709 Die set M22520/5-01 M22520/5-45 Ins / ext tool in metal M81969/28-03 or M81969/14-06 8 Pin 282 281 282 581 010 M22520/2-01 Daniels K709 282 293 282 236 M22520/5-01 M22520/5-45 282 549 001 M81969/28-03 or M81969/14-06 8 NF24Q100 Socket 282 281 282 581 010 282 293 282 236 282 549 001 These contacts have been tested as per ARINC 600 supplement 14 standard. BMA CONTACTS Contact size Cable type Connector Type Environmental part number Non Environmental part number Frequency range VSWR 8 SHF5 - SHF5M (1) Pin (2) 617 171 011 617 171 010 DC-18GHZ 1,35 @ 18GHZ 8 RG142 Pin (2) 617 171 021 617 171 020 DC-12GHZ 1,35 @ 3GHZ 8 SHF2.4M (1) / UT.085 Harbour SS405 Times Tflex405 Pin (2) 617 171 031 617 171 030 DC-18GHZ 1,35 @ 18GHZ 8 SHF5 - SHF5M (1) Socket 617 071 011 617 071 010 DC-18GHZ 1,35 @ 18GHZ 8 RG142 Socket 617 071 021 617 071 020 DC-12GHZ 1,35 @ 3GHZ 8 SHF3 (1) Socket 617 071 041 617 071 040 DC-18GHZ 1,35 @ 18GHZ 8 SHF2.4M (1) / UT.085 Harbour SS405 Times Tflex405 Socket 617 071 031 617 071 030 DC-18GHZ 1,35 @ 18GHZ Ext tool 282549001 Notes (1) BMA which have to accommodate SHF cable requires a wiring done by Radiall .Please consult us. (2) Pin BMA can only be installed in modified EPXB quadrax insert like 3T3AP , 10T2AP ,25T1AP.Eg : EPXBE3T3APA. 18 www.radiall.com This section includes all specific parts used to accommodate the Luxcis(R) termini in the QM connector. INSERT RANGE Material Part number Fiberglass filled thermosetting EPXBEF12CPA Insert and sleeve holder: aluminium alloy EPXBEF12SA Insert: fiberglass thermosetting Sleeve holder: high grade thermoplastic EPXBEF12CSA Hybrid pin insert for 6 electrical contact and 6 FO Luxcis(R) termini Fiberglass filled thermosetting EPXBE12F6PA Hybrid socket insert for 6 electrical contact and 6 FO Luxcis(R) termini (with sleeve holder) Insert: fiberglass thermosetting Sleeve holder: high grade thermoplastic EPXBE12F6SA Pin insert for 12 Luxcis(R) termini Socket insert (with sleeve holder) for 12 Luxcis(R) termini * Socket insert is always supplied with sleeve holder. * Pin and socket insert can be mounted in either plug or receptacle shells. HERMAPHRODITE ELECTRICAL CONTACTS FOR HYBRID INSERTS Hermaphrodite connectors which is neither male nor female have been developed in which any connector may be joined to any other connector of the same design. Contact size 16 Cable size Part number Crimping tool 16-18-20 617 235 003 282 291 20-22-24 617 235 002 (M22520/1-01) Positioner Ins/Ext tool in platic 282 515 282 581 013 (M81969/1-03) OPTICAL PERFORMANCES Singlemode (UPC) 1310/1550nm Singlemode / APC 1310/1550nm Multimode (PC) 850 nm/ 1310nm Attenuation - Mean - Standard deviation (against a reference plug, IEC 61300-3-4 Method B) 0.15 dB 0.10 dB 0.20 dB 0.12 dB 0.10 dB 0.07 dB Return loss (maximum low variation: IEC 61300-3-6) > 50 dB > 60 dB > 20 dB For further details on the LuxCis(R) Termini please consult Radiall's LuxCis(R) catalog or web site. 19 www.radiall.com QM(R) SERIES LUXCIS(R) FIBER OPTIC TERMINI INSERTS AND CONTACTS QM(R) SERIES TOOLING AND ACCESSORIES Part number Description 617 954 041 Dust cap for plug shell 617 954 042 Dust cap for receptacle shell 617 980 024 Polarization key pin 617 980 025 Polarization key socket 282 668 001 Plier for polarizing post and key 282 521 004 Right angle insert extraction tool F780 855 000 Hexagonal key 5/64 inch(2mm)/ flats for sleeve holder removal 282 521 005 Insert extraction tool 617 954 020 Insert handling cover 282 515 Pastic insert extraction tool for Luxcis(R) termini (MIL M81 969/14-03) 617 991 001 EMI backshell 20 www.radiall.com In development, 2 new mounting device solutions with the QM connector: The L-Bracket - for single connector use, limited space solution. The H Shape Rail - double sided rail, a space saving solution for installation of either 30 or 44 connectors. Name of the user manual: MIIN1700000 please contact Radiall for a copy. Name of the technical specification: BPS-C-212. Manufactured under US patent App, No. 11/614.642. 21 www.radiall.com QM(R) SERIES PRODUCT RANGE EXTENSIONS QM(R) SERIES PART NUMBERS INDEX 22 Part Number 282246 282281 282291 282292 282293 282297 282515 282522 282556 282560 282572 282578 282588 282613 282886 282946 282970 282971 282972 617001 617002 617003 617004 617005 617030 617031 617032 617033 617035 617050 617052 617060 617065 617101 617102 617103 617104 617105 617130 617131 617132 617133 617135 617150 617152 617160 617165 617200 617201 617221 617240 617241 617250 617280 617300 Page 16-17 15-16-17-18 15-18 16 16-17-18 17 15-18-19-20 15 16 17 16 16 15 15 15 15-17 15 15 15 16 16 16 16 16 16 16 16 16 16 17 17 16 17 16 16 16 16 16 16 16 16 16 16 17 17 16 17 15 15 15 15 15 15 15 15 Part Number 617301 617320 617340 617341 617280 617300 617301 617320 617340 617341 617350 617390 282521004 282521005 282549001 282549004 282549029 282557021 282557020 282581004 282581005 282581010 282581013 282581015 282586003 282668001 R282600000 R282650000 617002001 617003001 617050001 617052001 617065001 617065011 617065013 617065014 617065020 617065021 617071010 617071011 617071020 617071021 617071030 617071031 617071040 617071041 617075011 617075051 617090010 617090012 617102001 617103001 617150001 617152001 617156011 Page 15 15 15 15 15 15 15 15 15 15 15 15 20 14-20 15-16-17-18 15-16-17 15 15 15 17 17 16-17-18 15-19 15 15 20 15 15 16 16 17 17 17 17 17 17 17 17 18 18 18 18 18 18 18 18 18 18 17 17 16 16 17 17 17 www.radiall.com Part Number 617165001 617165013 617165014 617165020 617165021 617171010 617171011 617171020 617171021 617171030 617171031 617171040 617171041 617175011 617175051 617190010 617190012 617221050 617224001 617235002 617235003 617260001 617291002 617324001 617360001 617370001 617391002 617954020 617954041 617954042 617980024 617980025 617991001 620065010 620075010 620075050 620165010 620175010 620175050 F780855000 EPXBEF12CPA EPXBEF12SA EPXBEF12CSA EPXBE12F6PA EPXBE12F6SA QMU22AN QMBRN00 QMBPN00 QMBZN00 QMBWN00 Page 17 17 17 17 17 18 18 18 18 18 18 18 18 18 18 17 17 15 15 15-19 15-19 15 15 15 15 15 15 12-20 20 20 20 20 11-20 17 18 18 17 18 18 20 19 19 19 19 19 13 12 12 12 12 QM(R) SERIES A global range To meet your needs Antennas RADIALL develops and produces antennas for frequencies from 27MHz to 6 GHz. * Technologies used: wire, patch, printed, wire-plate, PIFA * Numerous types of antennas: single pole, dipole, network, passive or active (with LNA), adaptable and intelligent, outdoor or integrated. MICROWAVE COMPONENTS Wide range of coaxial terminations and attenuators using standard interfaces (SMA, QMA, N, QN...) from low (1W) to high power (100W) and new cable load solution, chip terminations up to 18 GHz, hybrid or directional SMT couplers up to connectorized couplers, lightning protectors, detectors, rotary joints, phase shifters, DCBlocks... AEP CONNECTORS AEP RF connectors are designed and manufactured in USA for the demanding requirements of military field radio and avionics systems: * Coaxial waterproof connectors with a unique system of sealing. * MIL-PRF-39012 QPL connectors * SSMB and SSMC superior connectors * SLB Self Aligning connector system. MULTIPIN CONNECTORS The range includes rack and panel connectors (Arinc 404 & MIL-C-81659B DSX, Arinc 600 NSX & SW280WS1 BPX, EN3682/ MIL-C-83527 MPX JN1123 TCX), modular connector (EPX A & B), compatible with a large variety of contacts : signal, power, RF, data bus, fiber optic, quadrax and twinax. A range of wire to wire and wire to board is also available: B & MCSR duty connectors, M, MM, MB, MBC rectangular miniature series, MMC. FIBER OPTIC CONNECTORS Wide range of interconnect solutions, including standard connector interfaces for multimode and singlemode fiber (LC, SC, FC, ST...) as well as connectors and termini contacts (MIL-T-29504, ARINC 801) for harsh environment applications (aeronautic, military, naval, medical, railway...). Great flexibility for custom design. HARNESSES The combination of design and manufacturing of RF and microwave cables as well as multipin connectors (EPX, ARINC 404 and 600) allows Radiall to be a specialist of harnesses for onboard (aeronautic, navy...) or land (railways, removed antenna...) equipment or communications systems. All types of contacts can be used and mixed such as signal, power, RF, quadrax, fiber optic... RF & MICROWAVE SWITCHES Wide range of coaxial switching products for commercial, military and instrumentation applications. Available with a large choice of interfaces (SMA, QMA, N, ...), from DCto 40 GHz. Main products : * Standard RAMSES series. * PLATINUM series with high repeatability (0.03dB) on insertion loss during 10 million actuations. * Subminiature SPnT up to 26.5 GHz. * SMT high power micro-SPDT. FIBER OPTIC TRANSCEIVERS Our multi-channel transceiver modules in smallest available packages are fully qualified for harsh environments and avionics applications. * Bit rate up to 10 Gbps * Up to 12 channels per module * Various packages with footprint as small as 12x13mm2 RF & MICROWAVE CABLE ASSEMBLIES Wide range of cable assemblies using all types of coaxial connectors and cables. * RG, LMR, conformable, semi-rigid, corrugated, etc. * Cable diameter 0.8mm up to 1 5/8" * SHF wrapped cable manufactured in house for appplications at 40GHz and above * TestPro range dedicated to test benches * Lightweight range designed for airframe installation * Phase matching available for radar and other applications RF COAXIAL CONNECTORS The widest range of coaxial connectors in the world from microminiature (UMP) to standard connectors (7/16) covering the frequency range of DC to 65 GHz mixing standardized and custom interfaces (UMP, IMP, MMS, MMT, QMA, QN, MMBX). 23 www.radiall.com AUTOMOTIVE DEFENSE INDUSTRIAL INSTRUMENTATION MEDICAL SPACE TELECOM Photo Courtesy of U.S. Army AEROspace D7P000CE - 2010 April Edition Radiall India private limites www.radiall.com