PRELIMINARY SPECIFICATION Supplier : Samsung electro-mechanics Samsung P/N: CL05A475MO5NUNC Product : Multi-layer Ceramic Capacitor Description : CAP, 4.7, 16V, 20%, X5R, 0402 A. Samsung Part Number Series CL 05 A 475 M O 5 N U N C Samsung Multi-layer Ceramic Capacitor Size 0402 (inch code) Dielectric X5R Capacitance Capacitance L: 1.0 0.20 0.5 0.20 mm W: Inner electrode Ni Termination Cu Plating Sn 100% 4.7 20 % tolerance mm (Pb Free) Product 0402 Size dimension spec Rated Voltage 16 V Special Reserved for future use Thickness 0.5 0.20 mm Packaging Cardboard Type, 7" reel B. Samsung Reliability Test and Judgement condition Judgement Capacitance Within specified tolerance Tan (DF) 0.125 max. Insulation Test condition 110% 0.50.1Vrms Rated Voltage 60~120 sec. Resistance 10,000Mohm or 50Mohm Whichever is Smaller Appearance No abnormal exterior appearance Withstanding No dielectric breakdown or Microscope (x10) 250% of the rated voltage Voltage mechanical breakdown Temperature X5R Characteristics Adhesive Strength (From -55 to 85, Capacitance change should be within 15%) No peeling shall be occur on the 500g*F, for 101 sec. of Termination terminal electrode Bending Strength Capacitance change : within 12.5% Bending to the limit (1mm) with 1.0mm/sec. Solderability More than 75% of terminal surface SnAg3.0Cu0.5 solder is to be soldered newly 2455, 30.3sec. (preheating : 80~120 for 10~30sec.) Resistance to Capacitance change : Soldering heat Tan , IR : initial spec. within 7.5% Solder pot : 2705, 101sec. Judgement Vibration Test Capacitance change : within 5% Tan , IR : initial spec. Moisture Capacitance change : Resistance Tan IR : Amplitude : 1.5mm From 10 to 55 (return : 1min.) 2hours x 3 direction (x, y, z) within 12.5% With rated voltage 0.25 max 402, 90~95%RH, 500+12/-0hrs 8.8* or Over High Temperature Capacitance change : Resistance Tan IR : Test condition within 12.5% With 100% 0.25 max Max. operating temperature 17.7* or Over Temperature Capacitance change : Cycling Tan , IR : initial spec. of the rated voltage within 10% 1000+48/-0hrs 1 cycle condition Min. operating temperature 25 25 Max. operating temperature 5 cycle test C. Recommended Soldering method : Reflow ( Reflow Peak Temperature : 260+0/-5, 10sec. Max ) * For the more detail Specification, Please refer to the Samsung MLCC catalogue.